Table-type circular saws are famous for their performance. Racks are installed in different widths. Saw blades are most often made from an alloy of steel and aluminum. For professionals, these devices are great. However, it is important to note that the models differ in technical characteristics. To understand this issue in more detail, you need to consider the most popular circular-type saws.
Technical characteristics of the Corvette model
Circular saw (electric, bench-top) Corvette has a wide stand. The operating frequency of the tool is at least 2 thousand revolutions per minute. If necessary, the power of the model can be adjusted. The rack width is 12 cm. According to customer reviews, the gearbox in this saw is used with a protection unit. The limiter in the device is located at the top of the structure. The casing of the model is missing. The rotor operates at a frequency of 20 Hz.
The network failure protection system is used in the second degree. The thickness of the saw blade is exactly 2.1 mm. Lining on the body are missing. According to experts, this saw is quite stable. For cutting large bars model of this series fits great. On the market, this table-type saw can be bought for 13700 rubles.
Description of the Interskol saw
Circular saw (electric, table) "Interskol" is great for sawing oak beams. If we talk about the parameters, then the threshold power of the tool is exactly 3.1 kW. The specified saw works at a frequency of 22 Hz. There is no system failure protection system in the device. For professionals, the model fits great. In a minute, the saw blade makes approximately 3200 revolutions. A power regulator is located at the rear of the structure.
For the purpose of sawing pine boards, the model is suitable. The teeth in this case are at an angle of 35 degrees. There is no shaft overheating protection system. The width of the carriage is exactly 8.4 cm. Ventilation holes are located near the handle. According to customers, the brake is of high quality. In this case, the rotor runs smoothly. If necessary, the frequency of the instrument can be changed using the knob.
The base plate in the device is made entirely of steel. It is well protected against corrosion. The permissible temperature value for a saw in this series is -20 degrees. The valve in the tool is used with a damper. The limiter on the model is located at the top of the structure. A circular electric (table) saw "Interskol" (Perm, a construction equipment store) costs about 18 thousand rubles.
Customer Reviews for the Makita DHS680Z
The specified saw circular, electric, table (photo is shown below) reviews receive mostly good from customers. This device is made with one holder. In this case, the emphasis is made entirely of an alloy of steel and aluminum. If you believe customer reviews, then the limiter is able to withstand heavy loads. For cutting wide boards, the tool is ideal. However, it is important to note that the model uses a small casing.
At low speeds, the noise level is 33 dB. According to experts, this is quite a lot. Saw bush installed without gasket. The rotor of the tool operates at a frequency of 23 Hz. The rack width is 8.4 cm. There is no support washer near the saw blade. If you believe the feedback from customers, then the power can be adjusted without effort. In our time, the indicated table-type saw costs about 13,200 rubles.
Specifications of the Makita DHS665Z model
This circular saw (electric, table) has many advantages. Many experts choose it for its high frequency and high-quality stator. The rotor for a saw of this series is used with protection of the second degree. The rack is 8.3 cm wide. The saw blade is located at the front of the structure. The protective rod is not provided for the model. At average speeds, the model produces a maximum of 35 dB.
If you believe customer reviews, the network cable is equipped with a high-quality casing. The base tile in the device is applied small width. The protective spindle is located near the motor. The threshold power of this table saw is 2.6 kW. According to customers, the rotor of a model rarely burns out. However, it is important to know that at high speeds the device is allowed to operate no more than three hours. This table saw costs about 15500 rubles.
Description of the Makita DHS683Z saw
The specified circular saw (electric, table) has pretty good performance. The threshold power of the tool is 3.3 kW. According to customers, the limiter is configured without problems. In this case, the rotor is used with protection of the third degree. The casing for this saw is not provided by the manufacturer. The device is great for cutting wide bars. The stand has a width of 8.3 cm. With the stabilization of the instrument, everything is in order.
The washer near the saw blade is well fixed. The overlay on the rotor of the model is provided. The permissible saw temperature parameter is at least -20 degrees. The starter in this case is located in the rear of the structure. The base plate of the tool is made of stainless steel. The rotary spindle is used in high quality. Thus, the speed of rotation of the disk changes very smoothly. Nowadays, the tool in this series is about 12,600 rubles.
Customer Reviews on the Bosch PKS 55
The presented circular saw (electric, table) is in great demand. However, for professionals, the model is not the best way. The threshold power of the tool is 4.4 kW. The maximum frequency of this table-type saw is 3200 rpm. According to customers, the tool turns on quickly.
He uses a high quality brake system. The disc washer is missing. The width of the lower lining is only 8.8 cm. According to customer reviews, the rotor is used with high-quality protection. In total, the model has two carriages. The gearbox is used with a stem. This saw works at a frequency of 23 Hz. For the purpose of cutting long boards, the model is not the best fit. It stands in stores the specified table-type saw in the region of 17 thousand rubles.
Specifications of the Bosch PKS 58 model
This circular saw (electric, table) is able to quickly cope with the cutting of various wood. However, in terms of security, the model is significantly inferior to its competitors. If we talk about indicators, it is important to note that the threshold power is only 2.1 kW. The saw works from a 230 V network. There is no overload protection system. The driven gear in this case is used without a sleeve. The brake system is used with a lock. The maximum frequency of a table-type saw is 25 Hz.
There is no rotor protection system. The saw blade is used without a pad. In this case, the starter is used with a distributor. The network cable is protected by a cover. The flange in the saw is located above the gasket. At maximum speeds, the noise level is 35 dB. A circular saw (electric, table) with your own hands is repaired quite simply. There is no adapter for the model. According to customers, the disc is removed very easily. Guides at the saw are made of an alloy of steel and aluminum. You can buy this model for 12800 rubles.
Description of the saw DeWalt DWE560
The specified saw is primarily famous for its sturdy stand. Disk stabilization is quite high. The device fits perfectly for precise cutting of wood. However, the model still has drawbacks. First of all, the owners complain about the low record. In order to cut large bars, the model cannot be used. The motor in this case is used with a threshold power of 2.5 kW. In turn, the frequency of the presented table-type saw is 33 Hz.
The rotor is used with third degree protection. The energy consumption of the instrument is 210 watts. According to customers, the model turns on easily, but the regulator is very inconvenient. Network cable is standardly used with a cover. It is worth in our time saw this series only 14400 rubles.
Customer Reviews of the Bison Device
Circular saw (electric, bench-top) "Bison" stands out for its good performance, and its stand is installed in high quality. The motor is used at 2.2 kW, and it works at a frequency of 26 Hz. The rotor of the model is used without a protection system. If we talk about indicators, then the width of the rack is 6.8 cm. The saw of this series weighs only 5.6 kg.
The ventilation holes on the case are larger. Motor cooling problems are rare. At an average speed, the tool may be used for no more than three hours. There is no safety shutter in this case. The starter is installed as standard push-button type. This circular saw (electric, table) in the Leroy Merlin costs about 17,300 rubles.