Despite its centuries-old history, stucco molding for ceiling decoration is still very popular. Today it is made not only of gypsum, but also of a more modern material - polyurethane. He has many positive qualities. The main one is that the ceiling plinth made of polyurethane is almost impossible to distinguish from gypsum, and it lasts much longer. In addition, polyurethane foam strips are so versatile that they fit into almost any interior.
Like every building material, such a cornice has its own properties and features during installation. This article will be devoted to the fact that they are a ceiling plinth made of polyurethane (photo), installation methods, decor. We hope you find the information helpful.
Polyurethane ceiling - what is it?
The ceiling plinth is an important decorative element. Covering the defects during wallpapering at the junction of the ceiling with the wall, it logically complements the interior and makes the overall appearance of the room more complete. Using this material, you can also visually give height to the ceilings or, conversely, make them lower.
Polyurethane ceiling plinth is the best option in terms of price-quality-reliability ratio. The material from which the slats are made is environmentally friendly and has fire-fighting qualities.
Unlike polystyrene cornices, polyurethane is more resistant to mechanical damage, and the pattern on it is sharper and more relief.
Pros of a polyurethane baseboard
Polyurethane cornices have certain advantages. Consider them.
- Plastic. Flexible polyurethane baseboard will be indispensable for the decoration of walls, arches and niches with a non-standard surface. Any smooth or rounded bend without problems can be decorated with such a cornice.
- A wide palette and many options for texture. Even if it was not possible to choose the best option, the curtain rod made of polyurethane can always be painted in the most suitable color.
- Dirt-repellent properties. These skirting boards are extremely easy to clean - just wipe them with a damp cloth. In the presence of more serious contaminants, polyurethane can be cleaned using household chemicals.
- Environmental friendliness. There are no harmful substances in the composition of polyurethane foam, so the material can be used in any room.
- Hydrophobicity. The material does not absorb moisture, and therefore it is permissible to install it in bathrooms, showers, bathtubs.
- Imitation stucco molding. Designers and true aesthetes will be satisfied with this quality.
Cons of a plinth from polyurethane
Despite the entire volume of positive aspects, buyers in their reviews note one huge lack of material: weight. In this regard, it is necessary to carefully select the fasteners on which you will plant the ceiling baseboard made of polyurethane. With poor installation, the cornice will sag.
Installation of polyurethane skirting
There are two ways to install a ceiling skirting board made of polyurethane:
- with glue;
- by mechanical method.
Each of them includes several stages. In no case should one be omitted, otherwise the design may subsequently be violated.
Mounting the baseboard with glue
To install such a cornice with glue, you will need a special composition designed for polyurethane, polystyrene, or any liquid nails with superstrong fixation. If the skirting board will be mounted directly on a concrete, wooden or plasterboard wall without wallpaper, then this point should be taken into account.
During installation, joints will form between the elements. For their design, it is better to choose a special substance on an adhesive basis. It has the function of soldering, as a result of which the joints will be less noticeable, and the gluing place will be firmly fixed.
When the glue is selected, you can begin to install a ceiling baseboard made of polyurethane. Installation is as follows.
- Prepare and cut the material.
- Clean and degrease the surface on which the cornice will be installed.
- Prime the treated area and wait until it completely dries.
- Spread the adhesive on the surface of the baseboard, wait about a minute and press it against the wall.
- Do not release the bar for about a minute.
- Putty clear gaps.
- If desired, you can seal the gaps that may form between the baseboard and the ceiling or wall.
If there are sufficiently strong bends on the surface of the wall or it is not very convenient to hold the baseboard itself, it can be fixed with thin hairpin nails. At the end of the finishing work, these kind of paper clips can be removed or, if necessary, further tinted skirting boards leave, masked with paint.
Mounting the skirting board mechanically
Particularly heavy and textured elements are recommended to be installed on special mounting plates. As a rule, such a fastener is included with the baseboard.
- Set the corner elements.
- Mark the wall in increments of about 40 cm and drill holes for screws.
- Fasten the mounting plate with the screws.
- On the back of the baseboard there is a fixture for mounting. Just put the item on the bar and push it until it clicks.
- If necessary, process the joints, as in the first method.
Coloring polyurethane baseboard
White ceiling plinth made of polyurethane will be appropriate in almost any interior. However, with an extraordinary design solution, a light shade may look alien. In this case, the polyurethane foam cornice can be painted.
It is best to paint after mounting the baseboard. From the moment the elements are installed, at least 24 hours should pass, and in a humid room - about 48. For the decor, they select the usual water dispersion or acrylic paint of the desired shade.
To avoid paint on the walls and ceiling, the area next to the baseboard is pasted over with film or masking tape. It’s more convenient to work with a brush. The spray is not contraindicated, but it is more advisable to use it on large areas.
Expert Advice
In order not to make a mistake when installing the ceiling plinth, take into account some recommendations of professional builders:
- If the room has suspended ceilings, fasten the curtain rod mechanically. In this case, wrinkles do not form on the canvas, and the baseboard itself will hold more reliably.
- Choose the corner elements to your favorite baseboard, and not vice versa.
- If you could not find suitable corners, cut the baseboard at the joints at an angle of 45 degrees. Use a miter box or an office knife for cutting.
- When coating, avoid exterior paints - they contain potent chemical compounds that will violate the surface integrity of the polyurethane elements.
Polyurethane Ceiling Skirting Reviews
Both ordinary customers and professionals note the significant durability of the material, ease of installation and painting. Polyurethane strips are beautiful, this is perhaps the only option that is possible to mask the joint between walls and ceilings.
Accessibility is another indisputable advantage of a polyurethane skirting board. The price for it at first glance may seem overpriced: a good curtain rod of medium width will cost about 400-500 rubles per meter. However, the impression is misleading - the quality and appearance of such finishes fully justify its value. It is unlikely that there will be someone who will be dissatisfied with such beauty.