If you are thinking about how to mount a siding, then you need to familiarize yourself with the technology of the work. When purchasing siding as a finishing material, you should be aware that it is resistant to external influences, which is important for cement, steel, as well as vinyl coatings. Wood material requires additional processing every three years. The frequency will be affected by the complexity of the weather. If we talk about durability, then the last option of siding can last more than one decade only with proper care. The surface during operation will have to be tinted. If you want to refine the house with more practical material, then it is worth choosing a plastic siding. But in the variety of colors and textures, each material can compete with analogues. Some vinyl panels are almost impossible to distinguish from those made of natural wood. When purchasing, it is important to pay attention to the thickness of the panel: the difference between these parameters in one package should not be more than 1 millimeter. Otherwise, we can talk about factory marriage.
Features of storage siding
Before mounting the siding, you must purchase the material, however, some craftsmen buy it long before the start of work. A significant percentage of damage occurs during storage. If such a need arose, then the panels should be treated with extreme care. Two days before the start of the manipulation, it is necessary to bring the packaging into a warm room. On the street before installation, there should be only a few products that are planned to be fixed on the wall in the near future. The surface on which you will carry out the installation should be flat, this will eliminate the sagging of the edges and the central part of the panel. -30 degrees are the minimum storage temperature of the described finishing material, while storing the canvas at a temperature of +50 degrees and no longer follows. It is not recommended to pack in one pile. This does not apply to steel panels that do not undergo deformation due to temperature changes.
Preparatory work
Before mounting the siding, it is important to prepare a certain set of materials and tools, among the latter you can distinguish a puncher and a drill. Without them, the master will not be able to install the steel crate, which is necessary for further work. You will need a
circular saw or a jigsaw. These tools will significantly speed up the workflow. If you don’t succeed in renting them, and there is no such equipment available, then you can do without a hacksaw for wood and metal. You will need a screwdriver, without which the installation of fasteners will take several days. It will not be possible to produce exact dimensions without roulette.
The position of the elements cannot be adjusted without a building level. It is important to prepare a hammer, as well as scissors for metal, twine and a mallet.
Wall preparatory work
If you are faced with the problem of how to mount a siding, you should be aware of the intricacies of the preparatory work in the wall area. If the house is new, further work can be started immediately. If the building has already been operated, then it is necessary to remove the old finishing materials from the surface and rid the base of cracks using plaster. The wall should be rid of traces of mold and fungus, for this it is advisable to use special compounds. The crumbling plaster needs to be removed, as well as rotten boards.
Frame system installation
If you want to learn about how to properly mount a siding without deformation, it is important to remember that it is necessary to follow the rules for the installation of the crate. It can be made of wood, this option is considered the cheapest, it does not imply that the master has special skills. However, it is necessary to be prepared for the fact that the wooden frame is short-lived: after a while it can undergo decay. The second type of frame is made of steel, this option will be more expensive, but much more durable and reliable.
Install a secondary profile
If the master thought about how to properly mount the siding without deformation, then he should have information on how the auxiliary profile is mounted. A starting horizontal element should be mounted on the finished frame, which is fixed from the upper region of the base or from the surface of the earth, while it is necessary to ensure a distance of 40 millimeters. At the corners, leave a distance of 15 centimeters. At the junction of the slats, a gap should be provided, the width of which is 5 millimeters. Corner elements should be fixed at the corners of the building, while it is important to retreat from the cornice 6 millimeters. If you are thinking about how to mount a siding with your own hands, then you should not break the sequence. Initially, a start profile should be installed, and then corner elements should be installed. In places where siding will be mated, an H-profile is mounted. On this we can assume that the preparatory work has come to an end.
Installation of siding
Before you mount the
siding yourself, you need to study the installation procedure. The first panel should be installed in the grooves of the vertical profiles. In order to exclude deformation of the canvas, it needs to be slightly bent in the central part. After the sheet is lowered to the start profile and clicks on the connection. After the lower part is strengthened, fasteners must be installed in the central part of the technological holes. This is required for the free movement of the panels. All the following rows should be installed using the same technology. As an exception, the uppermost part acts: first you need to fix the finish bar, only then you should bring the panel into it.
Features of the work
If you do not know how to mount the siding correctly, then it is important to familiarize yourself with the nuances. Between a hardware head and a surface of a cloth it is necessary to leave about 1,5 millimeters. When choosing nails and self-tapping screws, you need to prefer the fasteners that are made of stainless steel. Whereas the fastener caps should be rubberized. If a wooden frame is used during work, its elements must be treated with flame retardants in advance. If manipulations are carried out in the winter, then the tolerances for thermal expansion should be increased from 6 millimeters to 10. This is true for the material that is mounted between vertically oriented profiles. Before installing
metal siding, it is important to look at the thermometer column. If the mark is below -15 degrees, then the work must be postponed.
Specialist recommendations
Installing siding on an uneven base is strictly prohibited, it is important to consider this, if after a year you do not want to do repair work. If the panels were deformed during transportation or storage, it is recommended to replace them (if there is no material "in reserve", then these canvases can be laid in places where they will not be so noticeable).
What the master should not do
Before installing vinyl siding, you should familiarize yourself with the basic rules. Among them, one can single out the need to use extremely well-dried bars to equip the frame system. If you neglect this rule, the frame will be deformed, which will entail a change in the initial size of the siding. When purchasing fasteners (nails and screws), you must choose those that have a length of 30 millimeters or more, otherwise you will not be able to achieve a secure fit. The distance between the fasteners should not seem more than 40 centimeters, although everything will depend on the crate. As a maximum distance, 60 centimeters are sometimes still chosen. As for how to mount a siding log, it is important to know that the fasteners should be mounted perpendicular to the panel, this will eliminate the creation of obstacles for the next row of finishing material. It is forbidden to fix the paintings through the surface, such an installation can not be called durable, since the elements will begin to deform when the first cold weather sets in.
The overlap of the panels should be 25 millimeters, this will eliminate the ingress of external precipitation and dirt into the joints. If the siding is fixed with an overlap, the master will have to cut the nail bar. Such manipulations have a positive effect on the decorative and functional features of the panel. Between the facade insulation and siding, it is necessary to provide a ventilation gap, the width of which is 3 centimeters. It will eliminate the appearance of condensation. Such an air cushion, among other things, will have a positive effect on indoor temperature.
Finally
If you need information on how to mount basement siding, then everything is simple: you need to use the same technology that was described above in this article. At the same time, experts say that in no case should you use liquid sealants in your work, trying to increase the resistance of panels to moisture. Thus, you will achieve only that negatively affect the integrity of the structure.