One of the most popular manufacturers of plumbing in Europe is Alkaplast. It is engaged in the production of traditional plumbing equipment and modern installation systems that include flush mounting. A distinctive feature of the products is a guarantee for 15 years.
Installation Reviews
If you want to install a hanging toilet in your bathroom, then you should consider the Alcaplast installation, which reviews will be useful for every consumer to read. These systems are traditional. They can be classified as standard, so they are universal. Modules do not have any outstanding features in terms of type of small thickness or height.
The installation provides for dry installation in a prepared place where there is a sewer outlet and where water is supplied. According to consumers, to carry out such work will require the strength of one person. This suggests that you can cope with the installation without outside help.
The toilet will have to be located next to the supporting wall or drywall construction, but the latter should have sufficient strength. Some requirements are also imposed on the floor surface: the thickness of the screed can reach 200 mm.
Considering the installation "Alkaplast", you will notice that any toilet with an interval of fastening up to 230 mm is suitable for it. The minimum value is 180 mm. Consumers emphasize that all toilets on the market today meet this characteristic.
The system has special adapters for connecting a separate water source. With it, you can install a hygienic shower next to the toilet and connect the toilet with an appetizer. Installation “Alkaplast”, according to consumers, is also good because it allows you to install an electronic toilet bidet. The mounting frame must have a connector for an electrical outlet.
5 in 1 kit description
If you want to install a hanging toilet, you can familiarize yourself with the collection of installation "Alkaplast 5 in 1". It provides for the following elements:
- white button;
- hidden installation system;
- seats with a mechanism for smooth lowering;
- soundproof plate;
- rimless cantilevered toilet.
Width, height and depth are 51 x 112 x 16 cm. The last value can be increased to 20 cm. The toilet drain mode is two-stage. Product Warranty is provided for 5 years.
Installation Instructions: Preparation
To install the installation and the toilet, the following elements must be prepared for it:
- toilet bowl;
- studs for fastening;
- flush button;
- frame installation;
- set of nozzles.
The latter will be needed to connect the tank to the bowl. Among the tools, a perforator and drill bits for concrete should be highlighted. You will also need:
- building level;
- pencil for marking;
- roulette;
- spanners and combination spanners;
- drywall trimmer knife.
Installation procedure
Installation "Alkaplast" is installed according to a certain scheme. At the first stage, it is necessary to make a niche in the wall, the size of which will correspond to the frame. Sewerage and cold water pipes are brought into this place. The next step is to connect the toilet bowl and close the niche.
Then you can set the flush button. At the final stage, the decoration is completed and the toilet is hung. It is connected to the tank and the sewage system. The Alkaplast installation is closed with plasterboard sheets.
Niche Formation
Walls with appropriate load-bearing capacity are suitable for creating a niche and mounting installations. The installation will be able to support a weight of about 400 kg. This suggests that the entire load will fall on the wall. A wall made of drywall is not suitable for this, during the operation of a plumbing fixture, it can simply collapse.
Installation installation "Alkaplast" provides for the formation of a niche with the following dimensions: 1000 x 600 x 150 mm. The last value is the depth, which can be increased to 200 mm. If your apartment is located in a high-rise building, then you can install a toilet using the niche of the fan riser. Its part is cut off. Additionally, an air valve is installed in the place where the outlet to the attic is located.
Sewage supply
Before installing the frame, you should take care of the drainage system. For this, a 100 mm pipe is used. It is laid as close to the floor as possible. Maintaining the right slope is extremely important.
The connection point is 250 mm from the center of the wall niche. On the horizontal part of the pipe, it is necessary to put on an oblique branch. After these operations, you can proceed with the installation.
Frame installation
At the next stage, the installation for the Alcaplast toilet bowl is installed. In two places the legs are fixed to the floor, while in two other places the frame is attached to the wall using brackets. It is very important to use the building level. Only then will it be possible to set the structure perfectly evenly. If you mount the frame with a slight bias, then the internal mechanism may interrupt, which will cause structural failure.
The horizontal position is set using wall mounts. Their position is changing. Once the installation is up, it is fixed to the wall. To give it more stability, the legs are additionally cemented. A layer of screed of 20 cm will be enough, but this measure is not mandatory.
The installation for the Alcaplast bidet at the bottom has several holes that are necessary for mounting the hinged bowl. A distance of up to 400 mm must be maintained between the floor and these holes. Studs are installed in the holes. They are inserted into the wall until they stop and fixed with special nuts. Studs are necessary for hanging a plumbing fixture.
Communications Connection
It is necessary to begin these works by connecting the sewer pipe. For this, the installation has a black tap for this connection. It is adjusted to the sewer pipe. The second side of the tap is fixed with special clips on the frame. Connection to the water supply system is carried out from one of the sides. Pipes are connected using a threaded connection.
Experts recommend the use of pipes made of polypropylene or copper, because these options are the most reliable and durable. Flexible water hoses are used to bring water to the tank. This option is inexpensive and can simplify the work. But the service life of such products is shorter compared to pipes.
Next, the reliability of the connection of the water supply system to the tank is checked. To do this, the water tap opens, which is located inside the tank. The tank is filled, which allows you to check all connections for leaks. If necessary, the faults are eliminated.
Button mounting
At the next stage, buttons for the installation of Alkaplast are installed. They can be mechanical or pneumatic. This operation cannot be called complicated, because all the connections are provided on the frame and must be brought to the corresponding hole.
To install the mechanical button, you must install the pins, and then adjust their position. The pneumatic model is connected by pipes on the installation, after which it will be ready for operation.
Finally
More and more often recently in the bathrooms of apartments and houses you can find hanging toilets. An excellent example is the equipment from the company Alkaplast. It is made in the Czech Republic and has European quality. The frame is based on metal, which has a long service life. The methods of fastening are technologies:
- to the main wall;
- to the floor;
- into the non-capital wall.
Water is supplied from above.
By purchasing the described installation, you become the owner of the frame module, which allows you to place the structure in front of the supporting wall or in a drywall partition. The module is universal, and the distance between the frame bolts is equal to a value from 18 to 23 cm. The frame has a high-quality surface finish, which ensures a long service life.