Automatic washing machines have long been indispensable assistants to modern housewives. But, unfortunately, they, like any other equipment, have their own life. Recently, many of us have been faced with a problem when the washing machine does not collect water well. The reasons for such failures we will consider in today's article.
Why is water supplied too slowly?
This is one of the most common problems that most owners of such equipment have to deal with. Of course, it happens that the washing machine does not pick up water (the cause of this breakdown will be discussed below), but most often the liquid still enters the drum, only very slowly. This may be due to several factors.
First of all, you need to check how much water is supplied to the tap. It is likely that its pressure is too weak, so the equipment cannot function normally. In addition, it is recommended to see if the inlet valve for supplying fluid to the drum is blocked.
If the washing machine does not draw water, the cause may be a clogged filter on the inlet valve. Visually, this element looks like a dense mesh that traps all contaminants. Frequent and too intensive use of the filter leads to the loss of initial bandwidth.
Why doesn't the liquid enter the drum at all?
If you select the necessary program and turn it on, but the washing machine does not draw water, the cause of this failure may be not one, but several at once. If you do not have the opportunity to call the master, then you can take a chance and try to deal with the breakdown yourself.
First you need to make sure that you do not accidentally block the tap that regulates the flow of fluid into the drum. It is not difficult to do this, since usually this valve is located at the point where the rubber hose of the machine is connected to the water supply.
In addition, such a failure can be triggered by instability of the pressure. Immediately reassure those who do not know why the Bosch washing machine does not draw water (the causes of such breakdowns are often the most unexpected), that this is one of the most non-dangerous and easily fixed problems. To solve this issue, it is enough to make a call to the Housing Office in order to rush its employees to establish normal water supply.
If none of the above reasons suits your case, then it is likely that you simply did not close the door of the hatch through which the laundry is loaded. With the door open, the equipment simply will not turn on, since a kind of flood protection will work.
Why is the washing machine collecting and draining water?
The reason leading to such a failure may be hiding in the incorrect connection of the drain to the sewer. Often such a malfunction occurs after moving the unit to another location. In this case, you need to consult the manufacturer's instructions. It is important that the drain hose is secured above the tank level. As a rule, this distance is about half a meter from the floor. This prevents the constant flow of fluid into the sewer system.
If, after a long and successful operation, the Indesit washing machine does not collect water, the cause may be hidden in serious damage to internal parts. It is advisable that a qualified specialist deal with such a malfunction, since in order to get to some elements, it will be necessary to disassemble almost the entire unit. Those who decide to fix such a problem on their own need to really assess their own capabilities.
Why is the washing machine collecting a lot of water?
The reasons for the overflow can be hidden in the malfunction of the pressure switch. It is this element that controls the amount of liquid poured into the drum. It is a small sensor, triggered after the tank is filled to a certain level. The most common causes of failure of this part are: loss of tightness of the membrane, burnt or oxidized contacts. Only an experienced specialist will be able to accurately determine whether the pressure switch is working.
Also, overflow may be associated with a violation of the sealing of the system that controls the water level. In such cases, the problem arises from a malfunction of the hose connecting the pressure switch to the tank. It may be clogged with dirt or let air in. As a result, the sensor receives false information regarding the amount of liquid in the drum.
Often, such breakdowns are a consequence of a malfunction of the solenoid valve associated with the natural wear of parts. In addition, sometimes it becomes clogged with particles of dirt or rust contained in tap water, which has never been crystal clear.
Diagnostic Methods
If the Samsung washing machine does not draw water (we examined the causes of this problem above), then you need to immediately look into the documents attached to it. Having found out that the warranty still applies to the equipment, you cannot repair it yourself. It is necessary to take her as soon as possible to the appropriate service center, where specialists will take care of her.
If the warranty period has already expired, then you can try to fix the damage yourself. To check how the pressure sensor works, it is recommended to unscrew the water supply hose and blow into it. If it is working, you will hear a characteristic click.
To test the automatic lock, it is necessary to disassemble the hatch and make sure that when closing the door, the relay limit switch is pressed with its tongue.
Malfunctions that cannot be fixed on their own
If the machine stops collecting water due to a breakdown of the sensor that controls the level, you need to contact professionals. The design of this element is based on the principle of expelling air entering the working hose. The liquid entering the system begins to put pressure on the air, which, in turn, acts on the stem. As a result of this, the feed is shut off and the washing machine does not collect water. The pressure related cause is difficult to eliminate.
If the malfunction is caused by a breakdown in the programmer, then repairs must also be carried out in specialized service centers. This is one of the main parts of the washing machine, thanks to which it can fully function. All complex electronic elements included in the design provide the supply and discharge of fluid.
Ways to fix the most common breakdowns
It should be noted that repair should be carried out by someone who has a sufficient supply of knowledge about electronics and household appliances. If the malfunction is caused by a non-closing hatch, then you need to disassemble the door and return the metal rod fixing the lock tab to its original position. In some cases, it becomes necessary to purchase a new thermal lock.
If the problem lies in the breakdown of the inlet valve, it is recommended to unscrew the water supply hose and check the filter. Maybe it is clogged, then rinse it and put it in place. If it is a blown coil winding, then it should be changed.
Breakdown prevention
Most of the malfunctions that cause the machine to stop collecting water occur as a result of a violation of generally accepted operating rules. In order to avoid problems, it is enough to adhere to a few simple recommendations.
Any washing machine has a special compartment for collecting various small items such as buttons, coins and ribbons. Remember to periodically inspect the bottom of the hatch.
It is also necessary to protect the equipment from power surges. To do this, it is advisable to purchase a residual current device. To prevent scale formation on the inside of the washing machine, it is recommended to add special preventative measures during washing.