How to choose a well submersible pump? Many experts recommend trusting only trusted brands. The performance parameter for low-power models does not exceed 230 cubic meters. meters of water per hour. Pushers in devices are used in various lengths.
An adapter is used to connect the pump. The mounting pins can be with or without clamps. Rods are integral parts of pumps. They are located in a horizontal or vertical position. A high-quality submersible pump costs around 12 thousand rubles.
Characteristics of the PEDROLLO 4BLOCKm2 / 20 pump
This well pump (submersible) is suitable for wells of various depths. Directly, the piston in the device is lined. If you trust the words of experts, then his move is quite large. The weight of the specified model is 12 kg. The coupling in this case is designed for a pressure of 8 N. The pushers in the device are located behind the valves. The feed mechanism is provided with an expander. The return spring is not set very large.
The plunger device is located behind the holder. The model is connected through an adapter. The stand at this pump is made entirely of stainless steel. The presented submersible pump operates at a frequency of 60 Hz. If you trust expert reviews, then lubricating the valve is quite simple. The pressure in the plunger mechanism is maintained at 3 bar. The pumping protection system is used in the second class. This well pump (submersible) is in the region of 13 thousand rubles.
Reviews of the model PEDROLLO 4BLOCKm2 / 22
The specified pump (submersible well) reviews, as a rule, receive a positive character. Many experts praise him for quick inclusion. The plunger mechanism is located behind the holders. If you trust the reviews of experts, then swapping is pretty fast. The overload indicator is at around 14 N. For servicing devices, keys of various sizes are used. The rod at the pump is located behind the piston.
The camera in this case has a length of 35 cm. The pusher is located behind the counter. The performance indicator is exactly 130 cubic meters. meters of water per hour. For 10 meter wells, the model fits perfectly. The swap device is used with a holder. The pump guard is installed behind the boom. It is made entirely of cast iron. According to experts, the pump frequency is well maintained. Problems with pumping water are rare. The piston diameter of the modification is 3.3 cm.
The return spring of the mechanism is used without clamping. There are no filters on the pump of this series. It is also important to note that the model uses only one bar. In order to monitor the parameters of the device, it is allowed to connect a pressure gauge. The clutch in the device holds the pressure limit at 3.4 bar. In stores, the presented well pump (submersible) is sold at a price of 9 thousand rubles.
Modification options "Gileks"
The pump well submersible "Dzhileks" reviews has the most diverse. Buyers praise him for practicality and compact dimensions. The stand in this case is used in stainless steel. In this case, the pushers are made entirely of cast iron. It is also important to note that the model has only one piston. In diameter it is exactly 3.5 cm. For 5 meter wells, the model fits perfectly. The performance of the modification is at around 210 cu. meters of water per hour. A standard set of keys is required to service the device.
The feed mechanism of the model is made with one holder. Clamps at the rack are able to withstand heavy loads. The pump of the indicated series operates at a frequency of 65 Hz. The model’s camera uses a single-channel type. The width of the holder is 2.3 cm. The modification handle is missing from the modification. If necessary, the pressure gauge can be connected via a connector. A filter for a pump of this series is also missing. There is a model on the shelves no more than 10,200 rubles.
Divertron 1000 model reviews
The Divertron 1000 well submersible well pump is designed for deep wells. The seal in the device is used with overlays. The water supply mechanism is made with one camera. The coupling of the model copes with overloads perfectly. There are no filters for this pump. The performance of the modification is not more than 230 cubic meters of water per hour.
For 20 meter wells, a pump of this series fits perfectly. The pressure gauge may be connected via a contact adapter. To service the modification, it is important to understand the plunger device. The coupling in this case does not need frequent lubrication. Judging by expert reviews, the bar is rarely erased. You can find a pump of this series in stores at a price of no more than 11 thousand rubles.
Characteristics of the Wilo TWU 3-0115 pump
The indicated submersible well pump with automatic equipment is suitable for wells of various depths. In this case, the piston is used with a holder. User reviews and experts say that it rarely breaks. The swap mechanism is installed single-chamber type. Channels in the device are rarely blocked. The model of this series does not have a fitting. The pins are located near the coupling. The length of the plunger is 21 cm. The valves in the model are located inside the channel.
The connecting hose is used in a braid. The model is great for 10 meter wells. The maximum pressure at the pump is 4 bar. Overload feeder can withstand quite large. The pressure gauge can be connected through an adapter. Experts and model owners confirm in their reviews that the stand is well protected. The plunger device is located behind the piston. The expander itself wears out very slowly.
It is especially important to note that there is no sealing sleeve in the device. The model weighs quite a lot, and transportation can cause problems. Pushers at this pump are connected to an arm. The model bar is made entirely of stainless steel. The device is quite simple to maintain. You can buy a model of this series in a specialized store at a price of 8700 rubles.
Modification parameters Wilo TWU 3-0123
The specified submersible well pump is very popular. What are its parameters? Experts note that his stand is made with a high-quality clamp. The piston of the modification is used at 2.2 cm. The pushers in the device are mounted above the holder. The return spring of the modification is able to withstand a pressure of 3 N. Judging by the dissatisfied customer reviews, the model is not suitable for wells of 15 meters. But for 10 meter wells, it fits perfectly.
The pumping protection system is used in the third class. Modification filters are used only with lining. The fitting for the mechanism is installed in the upper part of the structure. The sealing sleeve protects the piston reliably. If we talk about the characteristics of the device, it is important to note that the power of the equipment is 4 kW. Due to this, the model has high performance. The rod in the device is made entirely of cast iron. The weight of the specified submersible pump is 12 kg. There is a modification in the market of about 8300 rubles.
Characteristics of the Wilo TWU 3-0124 pump
The indicated submersible well pumps for water supply have a large stand. According to customer reviews, the piston is used in high quality. The coupling of the modification is used with a handle. The bar in this case is made of cast iron. There is a sealing sleeve on the piston. The maintenance of the pump of this series is quite simple. For 15 meter wells, the model fits well.
A pressure gauge to the device may be connected through an adapter. It is located next to the pushers. The connector for the modification is made entirely of stainless steel. The boost valve is designed for a load of 3 bar. The pins of the modification are located near the adapter. There is a pump of this series within 10,200 rubles.
Reviews about the model Wilo TWU 3-0136
This submersible well pump has rather high characteristics. The power of the unit is at around 5 kW. The device operates at a frequency of 55 Hz. Experts say that connecting the modification is quite simple. The coupling in the pump is located near the chamber. The piston is designed for a pressure of 2 bar.
The adapter for the pressure gauge in this case uses a contact type. The fitting is installed with a protective washer. The performance of the modification is not more than 250 cubic meters of water per hour. The mounting pins wear out very quickly. However, you can replace them without problems. Directly the stand at the pump of this series has a length of 25 cm. According to many buyers, the chamber is rarely contaminated. Protection against pumping is applied in the second class. The maximum pressure on the plunger device is 2 bar.
The filter of the modification is located under the camera. The holders in the device are made of cast iron. The emphasis is not very large. For wells at 20 meters, the modification works well. The hose in this case is connected to the nozzle. The boost valve is located in the chamber. The pads on the pump are made of polymer. It is possible to buy a model of this series nowadays at a price of 12300 rub.
Well modification parameters Wilo TWU 3-0138
This submersible well pump (water jet) is made with two chambers. He uses a piston with a diameter of 3.4 cm. If you trust the reviews of experts, he wears out slowly. It is also important to note that the pump has a compact stand. Directly holders are made entirely of cast iron. There is no latch for the modification. The connecting hose has a diameter of 12 cm. The mounting pins have good strength.
The rated power parameter of the pump is 5 kW. Overload in 3 N model may not withstand. In service, the device can hardly be called simple. First of all, it is important to note that the pushers are problematic to remove. Lubrication on the plunger mechanism does not hold well. The sealing sleeve sometimes cracks and wears out quickly. The return spring at the pump is not of good quality. There is a model of this series of about 10,300 rubles.
Grundfos Submersible Pump Characteristics
The Grundfos well submersible pump is suitable for wells of 10 meters or more. If you trust the reviews of experts, then his racks are designed for heavy loads. The piston of the modification is set to 3.3 cm directly. The feed mechanism is located in the lower part of the structure. Filters in this case are of high quality. The camera of the model is not very wide.
The coupling of the presented pump withstands a pressure of 4 bar. According to experts, problems with pushers are rare. The pressure gauge is connected to the modification via a connector. The hose of the model is attached with a diameter of 0.5 cm. A return spring is used with a holder. The plunger device is mounted on a clamp. The maximum overload indicator at the pump is 2 N. There is no sealing sleeve over the rack in this case. This submersible pump costs about 12300 rubles.
Water Horse Well Submersible Well Reviews
This submersible pump has one piston. The stand is made of stainless steel. In total, the model has three cast iron pushers. If you trust the reviews of experts, the sealing sleeve is able to withstand heavy loads. The width of the adapter is 3.5 cm. The handle is not provided by the manufacturer in this case. An adapter is located in front of the adapter.
In the standard set of the specified pump, there is no pressure gauge. The width of the rod is 3.4 cm. Two filters are installed to clean the channel. If you trust the reviews of experts, then they are clogged very rarely. Clutch deserves special attention. In this case, it is made with two latches. There is a model in the region of 11300 rubles.
Reviews on the model SPERONI SP 50-10
This submersible pump has one piston. The stand is made of stainless steel. In total, the model has three cast iron pushers. The sealing sleeve is able to withstand heavy loads. The width of the adapter is 3.5 cm. The handle is not provided by the manufacturer in this case. An adapter is located in front of the adapter.
In the standard set of the specified pump, there is no pressure gauge. The width of the rod is 3.4 cm. Two filters are installed to clean the channel. Users note that they are very rarely clogged. Clutch deserves special attention. In this case, it is made with two latches. There is a model in the region of 11300 rubles.
Parameters of the well modification SPERONI SP 50-12
The borehole pump of this series is manufactured with a long fitting. Judging by the numerous reviews, the mechanism is configured quite simply. He has a stand with a diameter of 6.7 cm. Pushers are located in the lower part of the chamber. The swap valve in the device is able to withstand heavy loads. Directly the manometer can be connected through the connector.
It is also important to note that the modification has a high-quality piston. His move is quite large. The impeller deserves special attention in the mechanism. The O-ring on it does not need frequent lubrication. The height of the pusher is 4.4 cm. Adapters in the model have a wired type. This submersible pump operates at a frequency of 65 Hz. You can find the presented goods on the shelves at a price of 12 thousand rubles.
Characteristics of the submersible pump SPERONI SP 50-14
The specified submersible borehole pump is in demand. The plunger is installed in his small size. As buyers of this model note, the piston stroke reaches a maximum of 22 cm. The adapter for connecting to the pump is installed in the lower part of the structure. The rod in this case is used with a protective washer. Directly fitting is located on the gasket. The maximum power rating of the submersible pump is at a damage of 5 kW.
Modification works at a frequency of 60 Hz. The pumping protection system is used in the third class. Special attention deserves a long stand. The camera is available with one channel. Pushers in the device are arranged in pairs. A pressure gauge is standardly connected to the connector. There is a modification presented for wells in the region of 13,400 rubles.
Reviews on the well model "Kid"
Water pump "Kid" differs from other models by a high resistance. The adapter in this case is behind the pushers. It is also important to note that the modification uses a high-quality plunger. His head is made quite wide and the pressure holds well. Directly, the piston is located under the chamber, and problems with it arise quite rarely. The return spring for the model of this series is able to withstand an overload of 3 N. It is also important to note that this submersible pump has a clamping flange.
The washer was selected for it is not very large in diameter. Filters near the valves are used with a mesh pad. A pressure gauge is connected to the specified submersible pump without problems. The coupling in this case is fixed on the rack. The ultimate power rating for this submersible pump is 7 kW. The mechanism of this series works at a frequency of 50 Hz. You can buy a water pump "Baby" in stores at a price of 12 thousand rubles.
Pump Summary
Given the characteristics of the above models, the rating of well submersible pumps is as follows:
1. Grundfos.
2. SPERONI SP 50-14.
3. Wilo TWU 3-0124.
4. PEDROLLO 4BLOCKm2 / 22.
5. SPERONI SP 50-10.
Each model has its own advantages. The choice depends on the estimated depth of the well and the desired capacity of the device.