How to evenly saw with a jigsaw? This question interests many, especially at the moment when a person is engaged in construction. This tool helps to cope with a difficult task. But what is it? According to external data and the main purpose, it is comparable to a saw, which has an electric drive. In this case, you can saw various materials:
- Wood products.
- Metal constructions.
- Plastic.
- The tile.
And to make work for any purpose is not so difficult. According to the masters, the main thing is to create all conditions so that it is convenient to work. How to evenly saw with a jigsaw? The first is to use only a flat and stable surface. The material for cutting should be firmly fixed, and a saw of the desired sharpness and size should be selected.
Such a saw is considered unique because it can work on almost all materials. In addition, she does not only straight lines. With its help, you can create crooked cuts. But before you start the process, it is worthwhile to understand which jigsaws are evenly cut and of high quality.
Work system
In order to fully understand the process, it is necessary to prepare everything first. Here's what you need if the work is done on wood:
- Any piece of wood.
- Electric jigsaw.
- Personal protective equipment - glasses, gloves.
- Machine oil.
Requirements
The very first thing is to securely and firmly fix the material on which the work will be conducted. It also happens that an error occurs, and the jigsaw begins to cut unevenly. It is worth finding out the reason, otherwise it will not work to achieve the desired cut. This is the stability of the table, as well as the reliability of fixing the material. Smooth sections to make such a tool is not so difficult, but if you choose the direction along the fibers, nothing will work. Although people with experience can even cope with such a task.
Recommendations
How to evenly saw with a jigsaw? If such a need is required for a person without experience, then the following actions must be performed - this is a parallel emphasis. To do this, on the one hand, fastening to the jigsaw is performed, and the second side is an emphasis on the edge of the tree. This is how it turns out to make the cut even and without any fiber residues.
Everyone can find out the device of this unit in the instructions. When buying a lot of recommendations give managers. Each manufacturer puts instructions, this is no less useful information, and it is worth studying. Everything should happen in stages, if questions arise, then they need to be addressed, and not continue to work “at random”.
Make holes
How to evenly cut with a jigsaw, for example, a hole? Often it is required to carry out just such actions. In order to set the jigsaw in the center of the future hole, a small hole is made, after which an aggregate for cutting is inserted there. Then just go along the marked line of the circle. A rectangular shape is also performed (namely, you need to move the saw along the side of the rectangle). But the corners smoothly bend around. Next you need to cut the next side.
Another important point in the work - do not press hard on the jigsaw. This condition is often violated by beginners, which leads to overheating and afterwards to breakdown. In addition, one saw should not be constantly used, otherwise it will become dull and will catch the sawn material.
Strong materials are not easy to cut. To make the procedure quick, machine oil is used. They are lubricated in the process, and work is fast. Low revs are another problem with such tools. The fact is that overheating occurs again. No one ruled out safety precautions, and even at home, do not forget about glasses and gloves.
When all procedures are completed, it is worth wiping the equipment and grease with machine oil. On sale there is an installation with a conventional and pendulum stroke. The first option is different in that the movement occurs upward on any material. In the presence of a pendulum stroke and upward movement, an additional knife is thrown forward. This allows you to increase the work process and at the same time do not wear the saw much.
Features of the operation
How to saw with a jigsaw exactly? Before you start, it’s worthwhile to find out the whole process, otherwise it will not work to reach the desired result. Often when working with any materials you need to create a cut with maximum accuracy. It is a jigsaw with an electric drive to cope with this work.
Here is what you need for this:
- Material for work.
- Jigsaw.
- Guide tools.
- Clamps.
- Pencil.
- Building tape measure.
Getting to work
The movement of the cutting blade must occur precisely so that the cut is the right one. It’s good when the frequency of movement is large. For this, a saw of maximum width is taken (this is suitable for wood). The main thing in this process is the use of the guide. A flat board or rake becomes the main assistant.
You can’t do without clamps. They have a workpiece and a guide. The material to be sawed should be placed on a small elevation. This helps not to rest against the jigsaw. After that, the distance that should be cut off is fixed. For this, roulette is used. After applying the risks with a pencil. Then, using any ruler, these marks are connected, and a cut line is obtained.
What to do next?
Next, you need to fix the guide in a certain place. Clamps help with this. Fixation is performed from the cut line. After this, you need to position the electric device with a saw to the cut line. Now they press the guide and also fix, the movement should not occur, but it is not necessary to press too hard.
Then they switch to the second side and also fix. The level of fastening is the maximum, but do not forget that some materials can be pressed. When the whole process is completed, you need to go to the first clamp. Make its installation correctly and clamp. Only then can you begin to make a smooth cut. Otherwise, you will not be able to do quality work.
Now you can turn on the jigsaw and start the process itself. The speed is large, the pendulum stroke should be at one. And the tool itself is placed so that the file is on the cut line. Only after this, the work will be completed efficiently, and the line itself will be smooth and impeccable.
Do not forget a single moment - if a person has no experience, then any mistake becomes fatal. Especially when you need to cut parts, the number of which is limited. Experts recommend learning how to perform all actions on any unnecessary material and only after that proceed with the main work.
What else do you need to know?
Any device has additional devices. They allow the whole process to be made more accurate and simplified. It is believed that sawing plywood with a jigsaw is the simplest process, since the material does not have a large thickness. Sometimes you need to cut small parts. How to evenly cut plywood with a jigsaw? This will be simplified with a special table. It mainly comes with this electric tool, although many create it after purchase on their own.
The use of a clamp is always necessary. The same applies to the table - it is fixed with the help of such an installation. But the process of cutting occurs in the opposite direction. But the movement is not made by electrical equipment, but rather by the part. Experts believe that this way the lines are accurate and correct.
Many beginners may encounter a problem such as clamping a saw. But how to deal with it? Often, many use a replacement plate. This applies to additional tools. In this case, the material for creating such a component is taken the most diverse. And fixing it occurs to the sole of the electrical installation. And already with the use of components such as the guide rail and adapter, an exact line is obtained.
Sometimes, when sawing, the material begins to heat up, and the process will simply slow down. In such a situation, it will be necessary to cool the material. To do this, use simple cold water. It is fixed on a support sole. Often people have a question about how to evenly saw through a laminate with a jigsaw. Everyone knows that this is a tree, for this reason the same principle applies to it. In the process of laying a laminate board, just such a tool helps to make the process simpler.
It is better to make a cut from the back, and the smallest saw is taken for this. This helps to avoid deformation along the cut line. It is with metal parts that heating occurs. Here you need cold liquid, and for the tool - engine oil. To create a cut line of any shape, the thinnest saw is taken. Another addition is the krugorez. Before installing it, make a hole in the center.
Curved cut
When creating a curved cut, a problem arises - the material begins to move. Therefore, before starting work, the table is well fixed (and the part itself, too).
How to evenly saw a chipboard with a jigsaw?
This question interests everyone. It is important to carefully go around the corners, but you can make a circle in the part only after all other slices are completed. For such work, the main saw is used. It is quite enough. Do not use force on the tool. Work with such a tool should take place in several stages:
- When working with hard materials - the use of engine oil and coolant.
- When working at high speeds, you need to rest, otherwise the equipment will overheat and fail.
- Observance of safety measures, use of gloves and glasses.
- At the end of work, the device is wiped and lubricated with oil.
There are also manual units. How to correctly and evenly saw with a hand jigsaw? This is easier because you can stop and make corrections, although many people think the opposite. In any case, the jigsaw is considered indispensable equipment for the home. Because it works on any surface and creates smooth cuts. If possible, you need to purchase it. He will definitely not be superfluous in the household.