Pavilions in suburban areas are built in order to receive guests in the summer or to spend quiet family evenings in such facilities with a cup of tea. And of course, in such buildings often set up a barbecue. In the gazebo, if desired, you can place a design of this type of absolutely any kind.
The difference between barbecue and barbecue
In principle, there is no particular difference between the two structures. In Soviet times, only barbecues were usually installed at dachas in yards. Barbecue fashion came to us from the west after the fall of the Iron Curtain. Such structures are designed in exactly the same way as barbecues, and externally they practically do not differ from them. The only thing is that when assembling the barbecue, the roasting pan is made in such a way that it is convenient to lay on it not a skewer, but a grill for frying.
Barbecue meat is cut into thicker pieces than for barbecue. But at the same time in a brazier it is placed on a grate closer to the coals. Regulate the heating temperature when cooking meat in a barbecue not by spraying coal with water or fanning, but by moving the grill to a level higher or lower.
What grounds can be classified
By the method of use, all barbecue are divided:
In the gazebos, of course, at least stationary barbecue models are installed. Such equipment, among other things, can be classified:
Types of barbecue by design
On this basis, the following structures are distinguished:
standard;
barbecue boilers.
Both types of equipment are very popular among summer residents and are installed in arbors quite often.
What are standard barbecue
This type of furnace equipment is most often made of brick. The construction of such barbecue in the gazebo is a rather expensive financially procedure and at the same time also laborious. Such structures are being built directly on the site, and in most cases simultaneously with the construction of the arbor itself.
Next to a brick barbecue, an additional countertop is usually built. This allows you to make the operation of this furnace equipment much more convenient. When constructing gazebos with a barbecue and barbecue grill for cottages, sinks for washing dishes are often built in, among other things.
Sometimes such equipment, designed for frying meat, is also made of thick sheet metal. Such constructions for suburban areas usually get ready-made. Below, for example, you can see just such a barbecue in the gazebo in the photo. Metal braziers look pretty, as you might have noticed. Moreover, they are not too complicated in design. If desired, and if there is a welding machine in the household, such a roaster, of course, will not be difficult to assemble, including with your own hands.
One of the features of metal barbecue is that in most cases they are installed in the middle of the gazebo. The walls of such structures can be very hot during frying. Therefore, if such equipment is located next to the parapet or arbor wall, the risk of fire will increase several times. At the top of this type of barbecue, in most cases hoods are mounted.
Brick, as you know, has a rather low degree of thermal conductivity. Therefore, in gazebos, barbecue grills built from such a material, unlike metal ones, are most often located at the back or one of the side walls.
Grilled meat is usually, of course, on coals. But sometimes constructions powered by electricity or natural gas are also installed in the gazebos.
Design features of barbecue boilers
This type of equipment is very popular in the USA. Barbecue boilers are made in most cases from metal. The brazier of models of this variety is a thick-walled metal bowl with a lid. If desired, on equipment of this type, you can not only fry meat, but also use it as a mini-oven.
Like conventional metal structures, barbecue boilers in gazebos are most often installed in the center.
Types of functionality
Equipment of this type installed in arbors of private houses in different cases can be supplemented:
smokehouses;
grills;
cauldrons.
Sometimes in suburban areas, projects of gazebos with barbecue, barbecue and gas or electric stove are also implemented. In this case, the last type of equipment in most cases is built into the countertop.
Quite often, owners of private houses develop and implement also projects of gazebos with stoves, barbecue and barbecue. Overall heating equipment in the design of such complexes is included, of course, quite rarely. However, small cooking stoves can certainly make the operation of such complexes much more convenient.
The design of any, even the smallest, barbecue grill often includes, among other things, a special compartment designed to store dishes, firewood or purchased coal in bags.
Of course, not only brick barbecues, but also metal ones can be multifunctional. Such equipment is often also supplemented with grills, smokehouses or even cauldrons.
What are grilled models
Such designs are especially popular with owners of suburban areas. Brick barbecue, installed in the gazebos, grills are complemented almost always. Very often, such devices are included in the design of metal equipment of this type. Grills can be installed both in self-made and in purchased barbecue.
Such devices are usually located above the braziers themselves. At the same time, for their installation, they choose such a height that in the future it was convenient to use the owners of the suburban area themselves.
Projects of gazebos with barbecue, barbecue and smokehouse
Such structures in suburban areas are installed, of course, also quite often. The design of the complexes, consisting of barbecue, barbecue and smokehouse, are quite complicated. But at the same time, if such equipment is available on the territory, the owners of the site not only get the opportunity to fry meat on charcoal. Using this type of equipment, you can also cook, if desired, smoked bacon, meat, sausage and chicken legs.
Both in brick and metal barbecues, the smokehouse is usually located on the side. At the same time, under this compartment, a furnace with a blower is equipped. Sometimes the smokehouse in the design of the barbecue and include the bottom. Such complexes are usually less convenient to operate, but also more compact.
Models with a cauldron
Having built a summerhouse with a barbecue, barbecue and smokehouse at the cottage, you can ensure yourself the most comfortable pastime in the country.
Equipment of this type, in addition to roasting meat on coals, is used for cooking pilaf, kharcho, beshbarmak, etc. Kazan, like a grill or oven, can be included in the construction of a brick or metal barbecue. In the designs of the first type, such dishes are usually simply mounted in a side tabletop. To a metal barbecue, a cylindrical hollow support-furnace is first welded, and then a cauldron is inserted into it from above. In this case, usually thick-walled bowls of not too large diameter are used.
What can be the design of a metal model
Such designs may vary, of course, by the way they are designed. Metal barbecue in the gazebo in most cases, simply painted with dark heat-resistant paint. But more attractive designs of this type, decorated with forged elements, are also on sale. Such barbecues are, of course, more expensive than ordinary ones. But they look really just great. Being installed in the gazebo, such a model can become a real decoration of a suburban area.
If you wish, you can finish with wrought iron elements, of course, and a metal barbecue made by yourself. But in this case, among other things, it will be necessary to additionally purchase special, rather expensive equipment. On sale in specialized stores today there are machines specially designed for the manufacture of forged products in the domestic environment.
Brick finish
Arbor for a summer house with a barbecue on the countryside site is often a central element of landscape design. Therefore, this structure itself is designed, and the equipment installed in it should, of course, be beautiful.
Brick barbecue, erected in the gazebos, in most cases do not additionally decorate. Designs of this type themselves look pretty attractive and solid. In addition, under the roof of the gazebo, the brick, of course, does not need additional protection, for example, from moisture.
Additionally, a barbecue is usually finished only when they want to stylize them in accordance with the design of the site itself. The walls of such structures built of brick can be made out using:
plaster mortar;
facing tiles;
artificial stone, etc.
Barbecue is usually plastered in areas decorated in some of the folk styles, for example, country or Provence. At the same time, for finishing furnaces of this type, conventional plaster as well as decorative plaster can be used.
Brick or stone barbecue, unlike stoves, is allowed to be finished after construction. The walls of such structures are heated during cooking meat is usually not too much. Therefore, facing a barbecue with stone or tile can simply be done using heat-resistant glue.
Types of bricks and mortars used in masonry
If you wish, on your own in the gazebo, in this way, you can make both brick and metal barbecue. In the first case, such structures are erected in accordance with schemes of a special kind called orders.
One of the distinguishing features of barbecue, in comparison with other types of furnace equipment, is that they can be built entirely from simple ceramic bricks. The only thing for building a barbecue is to use only a full-bodied version of this material. However, some owners of suburban plots use more expensive fireclay bricks on their own initiative when laying barbecue roasters. The use of this material can significantly extend the life of such equipment.
The usual brick when erecting a barbecue with their own hands is laid in most cases on a cement-sand mortar. At the same time, they prepare it most often also on their own in a trough or concrete mixer. Chamotte brick during the assembly of roasting is laid on a solution prepared on the basis of clay.
What can be made of metal construction
Do-it-yourself barbecue of this type is most often welded from sheets of thick metal. But sometimes, for the manufacture of structures of this kind, various kinds of improvised materials are used. This could be, for example:
old iron barrel;
empty gas bottle;
rims;
old iron troughs, etc.
Used metal items are also often used as supports for metal roasters. They make supports for such structures, for example:
Sometimes barbecues in suburban areas are also made from very simple materials. For example, in order to make such a design, a frame is welded from a corner and just a lattice shelf from an old refrigerator is installed on it.
Projects of gazebos with barbecue
Actually the small architectural forms of this variety themselves can be placed on sites in a variety of places. However, most often gazebos with barbecue are installed in the immediate vicinity of the house. This arrangement subsequently facilitates the task of electrifying them or, for example, laying a water supply.
Very often, suburban areas are built, among other things, and baths with gazebos and barbecue. Such structures, of course, are actually very convenient to operate.
The design of the gazebo with barbecue can have a very different. The shape of such structures can be rectangular, round, polygonal, etc. Most often, in suburban areas, of course, projects of gazebos with wooden or metal barbecue are implemented. Such structures usually do not even have walls as such. Instead, when erecting arbors of this type, parapets simply gather.
Sometimes in the courtyards of country houses more solid brick enclosed structures of this type with windows are also erected. In most cases, these are gazebos with barbecue grill and stove, the design of which allows you to cook food on it, and use it as heating equipment. Sometimes in such structures, in addition to barbecue, even small fireplaces are installed.