Heating equipment is available in a huge range of options, models and modifications. Units differ in size, the principle of heating and heat distribution, appearance and indicators of energy consumption. As a rule, if the choice is made in favor of one of the operational indicators, then you have to sacrifice other characteristics. This is what happens with the category of low-power compact heaters. But in some cases, high power is not required. For example, a plinth electric convector, although it is not a champion in terms of heating efficiency, but it organically fits into the interiors of modern apartments and takes up little space.
Features of skirting convectors
Convectors are considered the best option for heating small apartments. This is due to the fact that they are safe for users, have small dimensions and presentable design. All these qualities are completely superimposed on skirting models. In modern versions, the plinth electric convector also allows you to accurately control the temperature regime - up to 0.1 degrees. The device is controlled by a thermostat, which also provides a whole set of auxiliary options for setting operating parameters.
As already noted, such units cannot be compared in terms of power with larger overall alternative installations, but this defect can be compensated for by using several devices at different points in the house. With the help of a special adapter, a plinth electric convector can easily be included in a common network of several heaters.
Types of equipment
Traditional convectors differ in the type of fastening and the form factor, but skirting modifications almost always include wall mounting. Therefore, the main factor of separation is the type of thermostat, which, by the way, may be completely absent in the budget versions. So, control can be carried out through mechanics or electronics. Thermostats of the first type are manually configured, but models with such equipment are cheaper. Electronics makes baseboard convectors more expensive, but adds convenience during operation. Modern devices can even provide a programmable way of working. Convectors are also classified according to their purpose in terms of the place of use. Manufacturers produce special models for winter gardens, greenhouses, living rooms, bedrooms and children's rooms.
Reviews about Megador models
The main advantages of these heaters include the performance of the main function. As users note, convectors of this family not only provide high thermal efficiency, but also are highly accurate in bringing the temperature regime to the required levels. In particular, the Coner series is the most promising development of the Megador brand. A skirting convector, reviews of the thermal function of which is generally favorable, may well demonstrate gaps in reliability. This also applies to products from this manufacturer. Many users point to the burnout of the internal filling, as well as to poor-quality insulation.
Dimplex Model Reviews
Under the Dimplex brand, skirting models of the LC series are available. According to the owners, these convectors have the ability to quickly heat up, work almost without noise and require a small amount of energy to power. True, unlike the previous model, LC modifications have more solid dimensions, so you should not rely on the ultra-compact equipment of the room with a heater. But in terms of reliability, Dimplex baseboard electric convectors almost do not cause any complaints. The remote controller adds ergonomics to the devices, and the protective panel of the case allows you to use the device even in a children's room.
Noirot Model Reviews
The Melodie Evolution line is designed for use in small rooms with an area of ββabout 10 m 2 . Owners of such devices indicate stable operation with instant heating, and also emphasize the special external coating of the case. The fact is that the designers used mimetic layering, thanks to which the external panels take on a shade that optimally fits into the stylistic composition of the room. In addition, Noirot baseboard heating convectors have modern thermostats that are easy to operate. In addition, users indicate the exact maintenance of the set temperature.
Disadvantages of skirting convectors
Still, the main drawback of almost all skirting convectors is still the lack of power, which is due to the size of the equipment and the principle of heating. The very concept of such devices does not allow operation at high capacities - this is also explained by safety requirements. One way or another, but it is not practical to use a plinth convector for heating a room with a large area. At least, its function cannot provide the requirements for the main sources of heating. Another disadvantage is power consumption. In the general line of electric heaters, this is one of the most economical devices - in any case, manufacturers regularly demonstrate new developments aimed at optimizing operating costs. But if you compare with devices that run on gas, water or solid fuel sources, the financial investments for the maintenance of such equipment will significantly exceed the demands of alternative systems.
How to choose the best model?
You should focus on the power potential, form factor, the presence of additional functionality and an adjustment system. Nonetheless, basic technical and operational performance indicators are basic, including power and temperature range. If there are no special requirements for heating, then you can opt for one of the Megador models. The lowest category is represented by a plinth electric convector, the price of which is about 5 thousand rubles. This is a good option if you need to provide warmth to a small living room or kitchen. If the equipment has high requirements in terms of ergonomics and functionality, then the choice should be made in favor of the Dimplex brand. These systems are convenient in operation, offer a new look at the convector control system, and are also safe to use. Noirot products are optimal by all criteria, but they can be purchased for 15-20 thousand. This is a considerable amount for a small heater, but the user can also count on the durability and reliability of the device.
Installation Rules
Installation operations practically do not require dirty work. Wall mounting method involves the use of hardware connections, the choice of which is determined by the finishing material. It is much more important to comply with the requirements for the location of the device. According to manufacturers, the installation of skirting convectors should be performed no higher than 20 cm from the level of flooring. At the same time, the protrusions on the wall, which are located above the unit, should not exceed it by 15 cm. The rule for the arrangement of furniture and other interior items regarding heated surfaces also applies to all convectors. As for the connection, in contrast to the high-power heating equipment, which is mainly represented by boiler plants, these devices operate only from a 220 V network. Again, using fittings for flush mounting, the owner of a small apartment can organize complex heating of all rooms using two to three heaters. The wiring can be fixed both in the underground and in the closed niches.
Conclusion
The converter segment has always been attractive to homeowners in apartment buildings. Largely because this equipment requires the least space, does not spoil the look of the interior and at the same time copes with its tasks. In addition, and for the price, this option is still one of the most attractive. Itβs enough to recall that the Megador electric baseboards are available in the market for 5-6 thousand rubles. Nevertheless, when choosing a heating system in the early stages, it is worth evaluating the possibility of using other solutions. Perhaps the closest competitor for this type of converter can be underfloor heating. Such systems are completely hidden under the floor, from where the room is heated. But, for energy supply, such systems are more expensive. Plus, it is worth adding complexity in installation. Therefore, skirting heaters still remain an uncontested solution, and if the lack of power does not play a special role, in terms of quality of operation, then this system can be used even as the main source of heating.