Thermal veils are engineering equipment that is used to eliminate air mixing in different thermal zones. Using these devices, it is possible to effectively divide the airspace. This can be an office and a refrigeration zone, as well as a room and a street.
The length as the main dimension when choosing such an aggregate is. Ideally, it should be equal to the height or length of the opening. Sometimes deviation from sizes up to 10% is allowed. When choosing a thermal curtain, it is also important to pay attention to the heating method. Devices of this type can be:
As an example, you can consider the thermal water curtain "Teplomash". Some models will be discussed below.
Reviews of the main features of the curtain brand KEV-98P412W
This model costs 30 500 rubles. It is a fairly solid structure in which materials are selected taking into account continuous operation. Installation of equipment, according to consumers, is possible in a variety of positions, in addition, the manufacturer has provided options for quick installation. The device can easily be connected to central heating, saving on electricity. The device is controlled by the remote control. To ensure optimal operation, the device has a sufficient number of functions.
Technical Specifications Reviews
The above-described thermal water curtain "Teplomash" can be installed in a room with an area of 572 m 2 . The equipment weighs 47 kg. The heating temperature is 33 ° C. Power consumption is 530 watts. According to consumers, the equipment has quite compact dimensions, which are equal to 2020 x 298 x 391 mm.
Buyers are also attracted by the universal way of installation. It is important before purchasing, according to consumers, to pay attention to the characteristic of air flow, it is 5000 m 3 / h. The power of the equipment is quite large and is equivalent to 57.2 kW.
Reviews of the main positive features
The Teplomash water thermal curtain described in the article, according to customers, is simple to operate. The remote control has a display, as well as buttons for adjusting the temperature mode and operation. The main advantage of this equipment, consumers consider modern design and structural features.
Model Instruction Manual
The water thermal curtain "Teplomash KEV 98P412W" should be operated under certain environmental conditions. The temperature should be in the range from -10 to +40 ° C. The relative humidity, which should be at the level of 80% or less, is also important. This is true at a temperature of +20 ° C.
Operation at low temperatures is possible if there are no air plugs in the heater. When using a curtain, special requirements are made for air. For example, it should have an allowable amount of dust and other impurities - not more than 10 mg / m 3 . There should not be drip moisture in the air, as well as substances that would act aggressively on carbon steel, copper and aluminum.
The Teplomash water thermal curtain, the operating instructions of which are supplied in the kit, has a fin made of sheet aluminum. It is important during operation to eliminate the likelihood of bends, damage and dents. The manufacturer advises to carry out manipulations with the device very carefully, holding it exclusively by the channel.
Reviews of the main features of the curtain brand KEV-20P211W
This equipment will cost a little cheaper, its cost is 13,200 rubles. It has the form of a device that is designed to be installed in a doorway 1 m wide. According to consumers, this unit guarantees protection against ingress of dust, air and insects into the premises.
The device has a classic design that will not be able to disrupt the interior. The model is supplemented by a remote control panel, which, according to consumers, provides comfortable control and configuration. This model was created using the latest technologies and durable materials, all this guarantees a long service life, even if the curtain is operated at maximum loads.
Technical Specifications Reviews
Water thermal curtain "Teplomash KEV 20P211W" can be installed in the opening, the maximum height of which is 2000 mm. The recommended area, according to customers, is quite large and equal to 79 m 2 . The equipment weighs only 16 kg, which quite often forces customers to choose this particular model.
The temperature of air heating is 23 ° C. Power is 7.9 kW. Air consumption is equivalent to 1000 m 3 / h. Buyers especially emphasize the universal method of installation, this suggests that any home master can install the curtain. In addition, the dimensions are quite compact and equal to 1014 x 281 x 231 mm.
Model Instruction Manual
Water thermal curtain "Teplomash KEV" must be operated subject to safety measures. For example, servicing the device should be entrusted to specially trained personnel. Operation cannot be carried out without grounding. It is forbidden to use the neutral wire as a ground. Its removal should be carried out on the terminal block.
Maintenance work is prohibited on running equipment. This also applies to the pressure path. You can position the equipment above the opening - horizontally or vertically - above it. Sometimes, to increase the efficiency of the system, equipment is installed on both sides. In any case, the nozzle should be located as close as possible to the top and sides. The angle of exit of the jet should be in the range from 10 to 30 ° in the direction of the street.
It is important to remember that the choice of curtain parameters will depend on the characteristics of the opening and the room. Thermal veils "Teplomash" water are usually installed by specialists. However, if you decide to carry out these works yourself, then for this you should use the universal brackets that are supplied. They can be used for vertical and horizontal installation.
Conclusion
If you decide to fix the curtain to the ceiling, then you must use other brackets, they should be purchased separately, as they are not included in the delivery. The thermal water curtain "Teplomash" is powered from a single-phase network, and the connection is made by a cable whose dimensions are 3x0.75 mm 2 . The master should observe the rules for operating electrical installations when connecting the device to the network.