The climatic conditions in our country are such that the formation of an ice crust on the stairs is almost inevitable. During the construction of modern shops, offices, other public institutions, such finishing materials as marble, granite, and ceramics are most often used. Under the influence of rain and snow, the surface becomes too slippery and traumatic. Therefore, it is necessary to use anti-slip pads on the steps. Any store owner who cares about his customers will never save on this important element.
What are anti-slip pads
This product is a strip of elastic material attached to a metal base. The pad is mounted simultaneously in the process of facing or after them. This most important addition to the interior has a protective function, protecting people from injuries even on the steepest and most slippery steps. In addition, such thresholds protect the steps themselves from chips, scratches and other damage. The material from which they are made is resistant to fire, sunlight, extreme temperatures, is not afraid of extreme weather conditions.
Main functions
Anti-slip pads on the steps are primarily used to ensure the safety of people climbing or descending on them. But this is not their only purpose. They significantly reduce the amount of dirt entering the room. In addition, the anti-slip profile for the steps also has an aesthetic function, because it has a fairly beautiful and stylish appearance. Thanks to this, the stairs look more attractive. The modern market offers a wide range of coatings for steps, which makes it possible to choose linings that are combined with the interior of a store, salon or office building.
Varieties
Most existing diverse coatings are structurally different from each other. Natural anti-slip rubber pads are produced from natural rubber on the steps. They can be flat or angular and easy to install.
The combined strips of aluminum and plastic are fastened with screws or glue. They are larger, so not every interior is able to fit.
Recently, anti-slip tape with an abrasive top layer has been very popular. Despite its low cost, such a coating serves for a long time.
Anti-slip rubber pads
To guarantee complete safety when moving people on a slippery surface, for the manufacture of linings requires a particularly flexible material that prevents slipping as much as possible. The most commonly used rubber anti-slip pads on the steps. The polymer from which they are made is resistant to sudden changes in temperature, retaining its elasticity even in 50-degree frost. Rubber is pressed under the weight of the human body, creating an obstacle to slip. Some models also have the ability to self-clean from ice. During deformation, a thin ice film breaks, preventing the formation of ice.
Profile advantages for steps
The coating has excellent shock-absorbing properties, on which ease of movement directly depends. Anti-slip pads on the steps are characterized by wear resistance, durability and attractive appearance. They are carried out using special technology on high-quality equipment using environmentally friendly material, which allows them to be used in institutions, swimming pools, shops and private homes. A wide range of colors makes it possible to select the appropriate elements in size and color.
High-quality lining for steps can prevent the slightest slippage in all weather conditions. In addition to its main function - to ensure safety, the anti-slip rubber profile serves as a protection for the very surface of the steps from abrasion and chips. It is quite easy to install, securely fixed, and also has the ability to dismantle without damaging the steps.
Aluminum profile
Combined anti-slip pads on the steps are an aluminum strip with a rubber insert having a grooved surface. Such a coating can cover only the upper part of the steps or be fixed in the form of a corner, protecting their side as well. Slips do an excellent job with the anti-skid function, providing excellent traction with shoes. The aluminum part serves to fix the product, which is carried out using a dowel-screw. Installation requires drilling. The rubber liner is replaced with a new one as it wears, so this coating can last a very long time. These are the most reliable anti-slip pads. They are mounted on wooden steps without much difficulty.
Mounting technology
- Place the part on the steps and, if necessary, cut the profile to size using a metal saw.
- Then through the mounting holes to make a notch marker on the base.
- Drill holes using these punch marks.
- Apply silicone sealant to the bottom of the profile.
- Lay the product on the step so that the mounting holes align.
- Insert dowels and fix the whole structure with screws.
Adhesive pad
This is a flexible elastic plate, on the lower surface of which there is a powerful adhesive layer. It can be L-shaped or in the form of a tape. Anti-slip pads on the steps (self-adhesive) are made of a special material with plasticizing additives. Such coverage is considered one of the best. Beautiful design, a large selection of colors make the stairs safe and beautiful.
The surface of the coating does not complicate the process of wet and dry cleaning, so it is not difficult to care for it. Reliable fastening of the product makes it safe to move on any smooth surface, be it marble, tile, ceramic or metal. Installation is so simple that it is entirely possible to implement it yourself. The big advantage of this profile is that you can install it anywhere where such a need arises.
Steps for mounting a self-adhesive pad
The surface must be thoroughly cleaned of dry dirt, and then wiped with a damp cloth. After drying, mark the place where the installation will be carried out. If the surface has irregularities or cracks, then it must be primed. For this, the primer is applied in a thin layer to the installation site. After it dries, you can proceed with the installation of the lining.
First, the protective film is very carefully removed , while it is important not to touch the adhesive layer with your hands. You need to remove the film gradually, tightly pressing the coating to the surface. If laying on a surface of granite or tile, then, having removed the protective film completely, you need to bend the product in half, holding the edges, and, having aligned the middle of the lining strictly in the center, press it to the surface.
Then the coating is smoothed in the direction from the center to the edges with a spatula or rubber roller. Caring for a self-adhesive film is quite simple. It is enough to brush off the dust with a brush and wash it with any detergent.
If the pads are selected and installed correctly, they will serve for a long time, not only fulfilling the safety function, but also as a decoration in a certain way.