The interior decoration of the bath includes the installation of the floor, covering the ceiling and walls, installation of the furnace and furniture. A material such as wood is ideal for cladding rooms. There are some recommendations that will help make a steam room safe, durable and warm.
Finishing the bath from the inside is not carried out by any lumber, but only by dry natural wood. It must be environmentally friendly and resistant to temperature extremes.
When using
coniferous trees that secrete resin, it must first be specially treated. Experts say that it is better to use hardwood when finishing the inside of the bath.
Material selection
Popular materials are abash, linden, aspen, alder and cedar. In ancient times, aspen and linden were used, which met the basic requirements.
Aspen Properties
Quite often, the bath is finished with aspen inside, this wood is appreciated for its resistance to changes in temperature and humidity.
Advantages:
- fine fiber structure;
- softwood;
- high resistance to humidity and temperature extremes;
- low density;
- ease in work.
Disadvantages:
- cracking;
- has a high coefficient of drying.
Currently, such material as abach has become popular in construction. Finishing the bath from the inside with an African oak was first made completely by accident. Once upon a time, materials were delivered to Finland, which were lying in drawers made of oak. The box that accidentally entered the sauna did not heat up, which caused the Finns to become interested in wood.
Abashi Properties:
- low specific gravity;
- elasticity;
- ease of installation;
- low thermal conductivity and permeability;
Floors
Usually choose a floor covering that retains heat. Builders recommend installing plank floors in the dressing room and steam room. For coatings, both coniferous and hardwood can be used. First, wooden logs treated with an antiseptic are laid. Between them insert OSB sheets, and install waterproofing on top. The insulation is laid in a checkerboard pattern, and the vapor barrier is already covered with a solid piece on top. On top of it, bars are screwed to the lags. After that, the finishing floor is laid. They do not make such a base in the washing room, but only install wooden grilles on the concrete floor.
Walls
Finishing the baths from the inside is done only with quality wood. The walls of the bath must be covered with thermal insulation. The materials that are used are glassine, foil, jute, stone wool. Do it as follows. For example, moisture-proof drywall is installed . Then cut off the insulating material and insert it into the frame, gluing with tape. From above, the crate is already stuffed and the front skin - the lining. The use of special reflective foil in the steam room is an important nuance. It prevents the outflow of hot air, and the bath heats up faster. The use of mineral wool and aluminum foil is very effective for steam rooms.
Ceiling
For ceiling cladding, wood with a small resin content is used. Thermal insulation material is used to create a comfortable temperature. The ceiling in the dressing room is also covered with thermal insulation, and the joints are glued with tape.
In construction organizations, among other services, there is such as finishing the bath inside. Photos of finished saunas and steam rooms show customers. The interior decoration of the bathhouse is a rather complicated process with its secrets. Facing work will be performed qualitatively only by professional builders.