How often it happens that the house is turned off the electricity, and trips out of town are often not accompanied by all the benefits of civilization. In these cases, you can not do without modern electricity generators, which make staying in the fresh air more enjoyable. Under such circumstances, you can spend several days away from the noisy city, without even noticing the privations.
Fubag TI 1000 is a gasoline inverter generator, which is an ideal solution for powering electrical equipment and electrical appliances for short-term operation. The device generates alternating current voltage of 230 V, the maximum power of which is 1 kW. If we are talking about a gasoline four-stroke engine, then it will consume about 0.7 liters of fuel per hour. With a similar flow rate, the capacity of a conventional fuel tank will be enough for 3.7 hours of continuous operation of the inverter, while the volume of the tank can be 2.6 liters.
Key Features Reviews
Fubag TI 1000 is equipment that is characterized by a manual start of the engine. This characteristic may impose certain inconveniences in working with an electric generator, but it allows to achieve advantages in cost and weight. According to customers, the portable gas generator has an exceptional quality of the generated current, this allows you to connect even the most sensitive to voltage drops devices.
The digital mini-power plant is smaller and lighter than conventional generators of the same power. As buyers emphasize, this fact allows the generator to be used even in hard-to-reach places, namely:
- fishing;
- in the forest;
- on hikes;
- during installation work;
- in small areas.
Noise level
Fubag TI 1000, the scheme of which will help the specialist, works with a low noise level, which is why this power plant is suitable for many. As practice shows, the device is quiet and can be operated even directly in the vicinity of a person at any time of the day. The noise level is 59 dB. As users emphasize, the Fubag TI 1000 can be used to charge car batteries, because the equipment has a 12V DC output. Among other things, you can power a variety of equipment that works under such voltage and current.
Technical Specifications Reviews
The equipment described in the article has an inverter type of alternator, the device has 1 phase, and the current strength is 3.9 A, while the current frequency is 50 Hz. The manufacturer took care of the long term of operation and supplied the equipment with air-cooled engine. The generator has an oil level sensor, gasoline is used as fuel. At a load of 85%, fuel consumption is 0.7 l / h. If we are talking about a load of 75%, then autonomy will be 3.7 hours. According to customers, the Fubag TI 1000 has a fairly compact size, they are equal to 460x248x395 mm, but the weight with a dry tank is 14 kg.
What else you need to know
Additional parameters: the presence of a noise protection casing and a DC output of 12V. The equipment delivery set contains not only the generator itself, but also a candle key, as well as an instruction manual. Sockets, power cable, plugs and circuit breakers act as additional equipment. Consumers emphasize that you can not worry about quality, as the equipment has certificates of conformity. In confirmation of this, it can be noted that the manufacturer gives a one-year warranty on the device. In the service center during this time you can take advantage of the full range of services for maintenance and repair.
Reviews of quality and reliability
Fubag TI 1000, reviews about which quite often only the most positive, has a digital inverter converter, so the power plant is able to produce a stable high-quality current. According to customers, you can safely connect the most demanding devices to the quality of electricity without fear.
Consumers say that far from civilization, you can enjoy its benefits. The power plant is compact and lightweight, it copes with the role of a backup power source in the workshop and in the country. It can be placed in the trunk of the car, taking advantage of the ability to conveniently move.
Parallel Connection User Reviews
As practice shows, the noise level of a working station is very insignificant, which is why it can be installed even close to the place of use, it can be a camp, a summer cottage or a construction site. The device has a reliable OHV engine, as well as an oil level control system, thanks to this the station is ready to serve for many years. Many users appreciate the possibility of parallel connection of the station. Such equipment in the amount of two units can be connected using a special device to obtain higher power.
Positive Performance Feedback
The Fubag TI 1000 inverter generator has some features that make the equipment more competitive than its counterparts. Among these factors, consumers note the presence of an informative panel, the possibility of convenient transportation and the presence of an additional form factor. As for the informative panel, you can use it to monitor the level of overload and the oil level in the unit. This functionality, according to customers, allows you to more carefully use the generator. Thus, he will serve the consumer of the city further without the need for repairs. With the ergonomic handle, you can easily move the generator from place to place, as well as transport it. It is important to take into account the presence of the SCHUKO 230B / 16A socket, with which it will be possible to power many devices from the generator without adapters.
Instructions for repairing the device
Fubag TI 1000, whose repair instructions can be useful to any user, provides for periodic inspection and cleaning of the air filter. The use of gasoline or solvents for these purposes is unacceptable, this is due to the fact that these substances are explosive and flammable. At the first stage, it is necessary to unscrew the mount and remove the left cover, designed for maintenance. Next, the cover of the filter itself is removed, for this you need to press the latch and remove the filter element. At the next stage, the master rinses it, for this it is lowered into clean engine oil. Then you should tighten the elements and install back. The filter cover closes, the maintenance cover is installed, and at the last stage, the screws are tightened.
Checking and cleaning spark plugs
Fubag TI 1000, the do-it-yourself repair which can only be carried out by an experienced craftsman, provides for periodic inspection and further cleaning of the spark plugs. In order for the power plant to work stably, the spark plug must be clean, the clearance must be correct.
To check the status of this element, it is necessary to remove the spark plug cover, and then remove the spark plug cap. It is cleaned, and then unscrew the candle using a special key. The candle is inspected for damage, if the insulator is damaged, the element is replaced, the candle is cleaned. The master should check the clearance of the candle, which should lie in the range from 0.6 to 0.7 mm. If necessary, the gap should be adjusted.
The candle is set back, it is important to avoid distortions. The candle must be tightened with a key, if it is a new one, then it requires 0.5 turn. If you installed an old candle, then the revolutions can vary from 1/8 to 1/4 revolutions. At the next stage, the candle cap is installed and the lid is closed. It is important to securely fix the candle, if it is poorly strengthened, then the entire power plant can be damaged. Sometimes users make a mistake by using candles of inappropriate temperature conditions. The use of candles without extinguishing resistance is unacceptable.
Checking and cleaning the spark arrester
After the Fubag TI 1000 generator is turned on, it will remain hot for a while, and burns must be avoided. It will be necessary to check and clean the spark arrester, it is necessary to carry out these manipulations every 100 hours of operation. At the first stage, the screws are unscrewed and the back cover is removed. The silencer bolts should be unscrewed, removed, followed by the gasket, it should also be removed. The gasket is cleaned with a brush, it must be checked for burnout. If necessary, this element is replaced, and the next step is the assembly in the reverse order.
Main malfunctions and solutions
Fubag TI 1000, the repair of which you can independently carry out, during operation may encounter some difficulties. Sometimes they are expressed in the fact that the engine does not start. It is important to check if there is fuel in the tank, if so, you need to make sure that the device has enough oil. Sometimes it also happens that there is no spark in the candle, while it is replaced, and if the problem could not be solved with the help of these manipulations, then you should contact the service center. If the engine does not start due to lack of fuel in the tank or insufficient amount of oil, then pour the appropriate fluid. The master should definitely check if there is gasoline around the spark plug, otherwise the fuel may catch fire and cause damage to the equipment. If the power plant did not work, then you should contact a specialist. Sometimes problems in the engine are solved by removing the spark plug cap and cleaning it. The candle is turned out and inserted into the cap. The body of the candle must be shorted to the body of the power plant. The starter is stretched and a spark is checked.
The Fubag TI 1000, whose repair instructions are described in the article, may run into such a nuisance when the voltage indicator is off. If this happens, you should check if the overload indicator is on, if so, then you need to find out if the power consumers are working. If the answer is no, you need to turn off the devices and contact the service shop.