Absolutely all owners of washing machines are well aware that the filters of this type of equipment must be cleaned. But not everyone knows where the filters are. In addition, not everyone knows how to carry out purification activities.
The article will describe in detail how to clean the filter in the washing machine.
How many filters are there in a typewriter
Almost all modern models of washing machines have two filters:
- Jellied. It can be found only in new models of washing machines. Cleans the water that enters the washing machine. Protects the mechanism from various impurities. It has the appearance of a mesh with small holes.
- Drain It is installed in all types of washing machines. It looks like a cork that spins into the washing machine itself. Purifies water that drains from the technique.
Drain filter
Clogs up fast enough, especially if you often wash your shoes or very dirty clothes in the car.
This type of filter is located at the bottom of the washing machine, most often on the right side. The compartment with the drain filter is protected by a special cover that can be easily removed with a sharp thin object (for example, a knife). By removing the cover, you get access to the filter itself.
It is easy to remove the drain filter, on its cover there is a small elevation, for which it is necessary to grasp and turn it counterclockwise. This manipulation must be performed until the drain filter is in the hand.
Filling filter
The filling filter clogs very quickly, so do not ignore its cleaning. You can find it in front of the water supply valve, inside the nozzle. Before removing it, disconnect the water supply hose. Next, carefully remove the filter itself.
Let's take a closer look at how to clean the filter of the Indesit washing machine - we will take the equipment of this brand as an example.
Cleaning the drain filter
Clean the filter in the following order:
- Unplug the device and turn off the water supply to the washing machine.
- Remove the decorative panel or cover as described above.
- Remove the plug from the drain hose (if equipped). Drain any remaining water from the hose. Replace the cap.
- Unscrew the drain filter cover and remove the filter itself.
- Thoroughly clean the structure. Well remove all foreign objects from it. Rinse the filter with hot water. If necessary, clean it with detergents.
- Shine a flashlight into the inside of the nozzle. This makes it possible to see other dirt that must be removed from the washing machine. Remove dirt carefully - damage to the pipe walls must not be allowed.
- Replace the filter and plug from it. Spin carefully.
- Replace the decorative panel.
Cleaning the inlet filter
Cleaning this unit is a rather complicated process. The difficulty of this event is associated with the inconvenient location of the inlet filter.
The filter is cleaned in the following order:
- Unplug the washing machine.
- Shut off the water supply to the device. The floor is located near the inlet hose.
- Put a rag on the floor, this will protect the floor from water that will pour out of the hole.
- Unscrew the hose by turning the nut counterclockwise. There is also a small rubber gasket, set it aside so as not to lose.
- Remove the filter. It is located inside a plastic container. You need to remove the cleaning device with the container using pliers.
- There is no need to remove the filter screen from the plastic cylinder - it is well cleaned in it.
- Place the filter under running water. Clean the device with a sponge, toothbrush, or a cloth with bristles.
- Inspect the hose. A small grid can be installed in it, which also needs to be removed and cleaned in a similar way.
- Install the inlet filter and the plastic cylinder in the nozzle. The design should be placed all the way. Do not let it stagger or spin.
- Screw the water supply hose and nut into place. Do not forget about the rubber gasket.
After you have installed all the elements, check the connection points. To do this, feed water into the system. If leaks are found, tighten the nut more tightly. If this manipulation does not produce results, install a new rubber gasket.
Let's talk about the features of cleaning the filter of washing machines Bosch, LG, Samsung and Ariston. This question interests many.
Cleaning the filters of a Bosch brand washing machine
To clean the filters of a Bosch brand device, you must remove the front wall of the washing machine. To do this, squeeze the clamps, remove the screws and remove the snail. The filter is cleaned of all contaminants in the same way as described above. After cleaning, the device should loosen and twist well. Remember to check for leaks after installing all parts.
Cleaning filters for Ariston brand devices
Ariston brand washing machine manufacturers placed a drain filter on the right side of the device. Take a screwdriver, insert it between the cover and the body, then carefully remove the panel. The plastic of the washing machine is quite thin and fragile, so do not try to remove the panel by hand. The filter of the Ariston washing machine is cleaned according to the algorithm described above.
Features of cleaning the filters of an LG brand washing machine
The technique of this brand is known for its quality and excellent technical characteristics. But even high-quality devices need constant care, so you should regularly clean the filters of your LG washing machine.
The drain filter in the washing machines of this brand is very low and the filter is closed by a hatch. To remove the cleaning device, you need to press the tongue key, and then pull the door forward. You will find a plug and a piece of hose. First of all, disconnect the hose, after draining the remaining water from it. Next, unscrew the plug and remove the grid. Wash the filter as described above.
Cleaning Samsung brand device filters
Devices of this brand can themselves report that the filters are dirty. Code 4E and 5E - this is a signal that it is time to start cleaning the filters of the Samsung washing machine. The drain filter is located at the bottom of the front panel.
Finally
Experts recommend cleaning the filters of the washing machine at least once every six months. If you often wash heavily soiled items, then cleaning the drain and inlet filter should be done every two months. The frequency of cleaning can also be related to the quality of the water that enters the washing machine. Hard and dirty water is a reason to clean at least once every three months.
Do not ignore this process. By regularly removing dirt from the filters, you extend the life of many mechanisms of the device nodes. Knowing the general recommendations for cleaning filters, you can easily cope with this task.