The building materials market offers a huge number of different insulation materials. The energy consumption of heating systems, the comfort of the owners of the house and apartment depend on their quality. Modern types of thermal insulation differ in a number of parameters, as well as in cost. When choosing, they also pay attention to the installation method, especially the operation of the finish in the future.
One of the popular varieties is Isobox insulation. It includes a wide range of materials that are used for various construction projects. It will be discussed further.
Manufacturer
Insulation "Isobox" was introduced to the market of insulation materials in 2007. It is produced by a large domestic company, TekhnoNIKOL. It has been operating since 1992. This brand is a global supplier of various insulation, sound and waterproofing, as well as products for the construction of motorways.
When creating its products, TechnoNICOL uses new scientific developments and improved technologies. Thanks to this, the presented products fully comply with modern building requirements.
Izoboks products are currently manufactured at 14 enterprises in Russia. The quality of products is constantly being improved, however, experts note that this indicator may vary depending on the manufacturer. The main profile of the represented company is the production of mineral wool insulation.
general characteristics
The characteristics of Isobox insulation may differ depending on the purpose of the material. This allows you to choose the best variety for various operating conditions. There are several main directions in creating thermal insulation.
The presented brand supplies the market with roofing materials, waterproofing, various mastics and primers, thermal insulation. The last category includes a whole group of heaters, which are created on the basis of mineral wool.
The main parameters by which the presented materials differ include thermal conductivity, density, and resistance to deformation. The cost of mineral wool is also different. The corresponding groups of heaters are used for interior and exterior decoration of premises, roofing, floor, etc.
Raw materials for production
The series that are in high demand are insulation "Isobox Extralight", "Inside", "Ruf" and others. In the process of manufacturing insulation, the latest technical developments are applied.
Mineral wool is an environmentally friendly material. It qualitatively retains heat indoors. At the same time, the presented material has a lot of advantages over other types of thermal insulation.
Insulators of the Izoboks trademark are made in accordance with the terms of the international certificate. Basalt stones, marls or other analog raw materials are used as the basis for the manufacture. In production, coke, feedstock and slag are added to the blast furnace. The process of creating mineral wool takes place at a temperature of 1300-1500º.
Creating stone wool slabs
Insulation "Isobox Inside", "Vent", "Extralight" and other modifications are made in an automatic process. In order for the fiber to take a uniform structure, it is subjected to special processing. For this, blasting, roll-centrifugal and centrifugal-blowing units are used.
Compaction of mineral wool occurs through special additives (phenol). Also, the plates are pressed, cut (giving standard dimensions). After finishing, the resulting panels are packaged and stored. For this, vacuum bags made of durable plastic are used. Also an important stage in the production is the quality control of each batch.
Mineral wool cannot be mounted and stored open in high humidity. In this case, it loses its properties, begins to pass heat. Therefore, during installation, the recommendations of the manufacturer must be taken into account.
Specifications
Before buying, be sure to consider the technical characteristics of the insulation. "Isobox Extralight", "Inside", "Rufus" and other popular series have an acid module, which is 1.7. This means that mineral wool is resistant to various chemicals that are present in masonry materials. It does not interact with dry mixes, cement mortars, plaster and other finishes.
The presented insulation is characterized by practically zero thermal conductivity. However, it should not get wet. Otherwise, it loses its original properties. Mineral wool does not absorb water well. It is not subject to various mechanical, physical influences. Aggressive environments have no effect on the material presented. It is a durable, durable insulation.
However, mineral wool is a vapor permeable material. Therefore, when mounting it indoors, it is important to provide a high-quality layer of external insulation. Otherwise, the “dew point”, which has shifted inside the room, will cause condensation to appear on the wall finish.
Benefits
Basalt insulation "Isobox" has several advantages over other types of thermal insulation. It refers to environmentally friendly materials. It does not harm human health and the environment. Although phenol is used in its production, this unsafe substance evaporates even before packing the plates in polyethylene. Mineral wool, which does not emit any harmful substances, enters the final consumer.
Also, the presented insulation does not release stone dust. It has no smell, does not emit vapors or gases. This is especially important for people with allergies. They can safely be near this material, mount it, etc.
The material is not subject to deformation, tearing. It has high thermal insulation performance. Mineral wool is quite dense, which allows it to withstand various loads. Depending on the density indicator, the insulation also has soundproofing qualities.
Heater "Extralight"
One of the most popular materials is the Extralight series. It is used for insulation of structures not subject to stress. This can be pitched roofs, attics, attics, floors, inter-floor space, frame wall structures, etc.
Several standard sizes of Isobox Extralight insulation are available (1200: 600: 50mm, 1200: 600: 100mm, 1200: 600: 150mm). The cost of production is from 600 to 750 rubles.
Presented cotton wool has a density of 30-38 kg / m³. Moreover, its water absorption is 0.5%. Thermal conductivity is at the level of 0.039 W / (m * K). This is a non-combustible material that is used in various domestic and industrial facilities. The presented material can be operated at temperatures from +400 to -60º.
Insulation "Inside"
Considering the technical characteristics of the insulation "Isobox", you should pay attention to such a popular series as "Inside". This is a hydrophobic material that is not combustible. It is used when arranging thermal insulation in a well, when creating ventilated facades with two-layer technology. Also, it is often used when warming frame structures.
Presented material is produced in plates with a size of 1200: 600 mm. Moreover, the thickness is 50, 80 and 100 mm. The cost of the presented series is 700-900 rubles.
The density of this material is 40-50 kg / m³. Water absorption is 1%. In this case, the thermal conductivity is 0.037 W / (m * K). Under the influence of the load, the presented stone wool is deformed by no more than 10%. This is a durable, high-quality material that is in demand today in various fields of construction.
Features
Features of the Isobox heater should be known to every builder who chooses a heater for various objects. This stone wool can be used at all facilities in our country, regardless of the climate zone. In this case, the type of insulating material should be correctly selected in accordance with the characteristics of operation.
The material does not burn, does not smolder, and does not emit smoke at elevated temperatures. When the plate is immersed in water, it will absorb no more than 1% of the liquid. At the same time, the indicator does not affect the duration of stay of cotton wool in the liquid.
Due to the good vapor permeability, the facade of the building is well ventilated. This avoids condensation on various surfaces. Mineral wool is characterized by a long period of operation. It does not require replacement for 50 years. It is resistant to various adverse effects.
Reviews of professional builders
Reviews about the insulation "Isobox" leave professional builders. They claim that the mineral wool of the domestic manufacturer is of high quality. It is light but durable. At the same time, the installation of thermal insulation is simple. Cotton wool makes the construction of buildings slightly.
Before installation, the vacuum packaging is opened. The material is left for 5 minutes. During this time, the panels acquire their natural look. After that, they can be mounted on the prepared surface.
Finishing quality using basalt wool remains consistently high. Vata does not collapse under the influence of various temperatures, does not burn and does not smolder. Condensation does not appear on indoor surfaces. With the right choice and installation of plates, it turns out to create a reliable, durable insulation layer.
Customer reviews
Considering customer reviews about the presented insulation, one can note the predominance of positive statements. Many owners of private real estate that used Izoboks for insulation note the acceptable cost of the material.
Thanks to an extensive dealer network, you can purchase the necessary insulation in almost any city in our country. He showed his high efficiency during operation. The insulation can significantly reduce energy bills. It is a durable, durable and reliable material. It is chosen by many domestic homeowners for various buildings, structures and premises.
Having considered the features of the Isobox insulation, its high quality can be noted. This is an environmentally friendly, reliable material that has been used for several decades.