All known methods for cleaning the site of tree debris can be divided into mechanical and chemical. The use of chemistry is an easy job, but takes a long period of time. Drugs decompose the stump from the inside into dust or make it combustible.
Chemical methods for removing stumps:
- Using nitrate. On a stump, both from above and on the sides (deep into the side), holes of different widths and depths are drilled. In the fall, when the crop around it is removed and everything is harvested, we fill the holes to the top with nitrate. Some advise to wrap the stump with a film afterwards so that water does not get into the drug, while others, on the contrary, recommend using water. Whatever advice you take, the meaning is the same: you will periodically have to pour the solution as it soaks the wood. While the stump is saturated with nitrate, oxygen also enters it. Next, the completely soaked stump is dried. Having dried a little, we plant fire on a stump. Nitrate in combination with oxygen will cause abundant decay not only of the ground part of the tree, but also of roots at a depth. Removing stumps in this way is unacceptable if the soil is peat. It is impossible to make fire on them, then it is impossible to extinguish it.
- With the use of salt. Abundantly sprinkle with coarse salt stump. Gradually, the wood under the influence of granules will begin to break down. But, using this method, you can spoil the quality of nearby soil. Therefore, it is used, clearing a place for construction. Chemical methods are not widely used because it is a lengthy process.
Mechanical methods
These methods involve the use of brute force and simple tools. Before embarking on this work, it is necessary to present the device of the root system of the tree. It is of two types: fibrous and rod. The core - the root goes deeper into the core, fibrous - branched root system. If you study all the known methods of uprooting a stump, you can compose one technology adjusted for the circumstances. So, let's begin. Of the tools we may need a shovel, crowbar, saw or hacksaw, ax, winch. Using an iron rod, we determine the location of surface roots. With a shovel, remove the earth from under them and cut it with a hacksaw. If the stump is small, then making cuts on one side, you can try to put the tree on its side and chop or saw off the root going into the depths.
How to uproot a stump if it is big?
Roots of medium size are removed, like small ones, but using crowbar as a lifting mechanism and the strength of two to three adult men. As an option, we dig a hole under the tree and wash the roots with a large pressure of water. Further according to the standard scheme: saw, ax and brute force. Larger stumps uproot using a winch or special equipment. Using a winch, do not forget to create a fulcrum for it.
Technical method
If for some reason the above solutions to the question of how to uproot a stump do not suit you, we proceed to the last method - the use of technology. This method - without physical labor and the use of chemicals. They are simple to ridiculously but expensive. It is necessary to hire a tractor with a special nozzle, and the removal of tree roots together with the ground part of the trunk will be quick and easy. If heavy equipment does not work, hire specialists. Their devices can carry a couple of men, so you do not have to free up a lot of space. These plants will crush the remains of the tree into chips not only from above, but also to a depth of 60 cm. As you can see, everyone can find the answer to the question of how to uproot a stump, at its discretion.