Rolling jacks among motorists are in great demand. First of all, they are distinguished by compactness. It is also important to note that many models are lightweight. On average, a modification with a carrying capacity of 3 tons has a mass of 13 kg. In workshops, rolling models are also in demand. First of all, they work quite quietly. However, in this case, much depends on the manufacturer. Stubs are most often used open type.
Piston systems in the models are located in the rear. In general, the designs of the rolling modifications are quite similar, but there are models with struts. Also, modern jacks are equipped with protective stands. Also on the market are models that have a wide heel. It costs an average rolling-type jack in the region of 3200 rubles.
Rolling jack 3 t: what is better to get?
First of all, when choosing a jack, it is important to pay attention to its parameters. The minimum lifting height of the device must be 130 mm. Heels are most often installed with a width of 4 cm. For a load capacity of 3 tons, this is considered normal. Further, it is important to evaluate the maximum lift height. This indicator should not exceed 320 mm. With a length of 28 cm, the jack must weigh no more than 7 kg. If we talk about design features, then first of all, the lifting mechanism is evaluated.
The handle should rotate freely. Its upper part is, as a rule, rubberized. The exhaust valves in the device must be protected. Models with opening plugs are not advised to choose. Separately, consider the connecting plate. The seam on it should be neat and even. The return spring in many versions is installed in the rear. An average model of a good manufacturer in the region of 3400 rubles will cost.
Spacer Mods
With a strut jack 3 t how to use? Data question certainly worries many. In fact, everything is quite simple. In order to raise an object, the heel of the device should be placed under the fulcrum. Next, fix the jack with the holder. The next step is to millet to lift the heel, working with the handle of the device.
It should be noted that models with struts in our time are pretty much in demand. Their handles can vary greatly in length. Directly struts are located near the side racks. The protective casing is located in the upper part. It should also be borne in mind that devices weigh much more than conventional models. The average weight of the jack is 13 kg.
Wide Heel Models
Models with wide heels are quite difficult to meet. However, global manufacturers have recently equipped them with their devices. Their distinguishing feature can be safely called increased stability. It should also be noted that they are available with wide racks. Protective covers in many configurations are installed in the upper part of the housing.
Handles exist both rotary, so fixed type. Rubber pads are most often used. If you believe the opinion of buyers, then this type of model is not very popular. However, for devices with a carrying capacity of more than 3 tones, wide heels are more important.
Jacks with protective stands
Jacks with protective stands are mainly manufactured by Miol. On average, their beams are installed with a length of 33 cm. Exhaust valves in almost all versions are located on the rear side of the jack. Handles in length can vary greatly. Almost all modifications with protective stands are made without holders. An average jack of this type is in the region of 3 thousand rubles.
Models "Forte"
Among the models of "Forte" rolling jack 3 t which is better to choose? Modification "TA-82" is most suitable for workshops. If you believe the reviews of experts, then it has no stability problems. The handle of this model has a fixed type. However, it should be noted that the stabilization of the jack is good. He also has excellent steel wheels. The pad in the sample used rubber.
The support in this configuration is applied with a thickness of 0.4 cm. Directly, the holder is installed in the rear of the structure. There are two exhaust valves in the model. If we talk about the protective casing, then it is located in the upper part. The plug in this case is provided by the manufacturer. Also on this model, the wheels are used with a special coating. Thus, the jack moves very quietly.
Jacks "Koto"
Considering the "Koto" models, a 3 t jack-up jack which is better to choose? First of all, it is worth noting the modification of CO2, which is made with a protective stand. If we talk about its parameters, it is important to mention that the minimum lifting height is at the level of 120 mm. Directly, the beam is installed exactly 33 cm long. The heel width of this model is 4.3 cm. The piston modification system can withstand a maximum pressure of 3.2 bar.
If we talk about the handle, then it is in this case made with a soft lining. Thus, during operation of the device, the car will never be damaged. If necessary, the jack can be placed on the holder. In this case, the protective cover is used quite wide. The plug is not provided by the manufacturer. The wheels of the model are used not of large diameter. If you believe the feedback from consumers, then this jack rolls due to a special coating with absolutely no sound. Today, the presented model is in the region of 3,100 rubles.
Why are T-Max models interesting?
Among the T-Max models, a 3 t rolling jack which is better to choose? Specifically, the modification 103A is capable of boasting a long handle. If necessary, the user can scroll it. Also, this model stands out with a wide heel. According to the documentation for the device, the length of the beam is 34 cm. Directly the piston system for pressure is rated at 3 bar. The wheels of this model are steel, and the pad is polyurethane.
The return spring in this case is provided by the manufacturer. The plug is used open type. However, the model still has drawbacks. First of all, it is important to mention the absence of a soft lining on the handle. Thus, the car can be damaged during operation of the jack. This model is not suitable for workshops. It costs in stores about 3400 rubles.
Models "Intertul"
Considering the "Intertul" models, a 3 ton rolling jack which is better to choose? The most popular modification is the "T0400", which is made with a protective lining. Directly the heel in the presented configuration has a width of exactly 4.5 cm. In turn, the beam is used with a length of 25.6 cm. There are two side racks for the model. The holders in this case are mounted on the brackets.
The wheels are set to a small diameter, they have a polyurethane lining. The lifting mechanism in the jack is located at the rear unit. The built-in tray for storing tools in the presented model is missing. Special attention deserves the quality of the handle. If you believe the opinion of buyers, it rotates freely. She has a rubber lining. There are two final clans by the manufacturer. The holder in the presented model is mounted near the lifting mechanism. It costs in stores no more than 4 thousand rubles.
Jacks "Vitol"
This company mainly manufactures models with spacers, but its range also includes the usual 3 ton rolling jack. Which type is best to choose? The DV-101 jack is famous for its strong beam among its competitors. In this case, the side posts are made of steel. The bearing emphasis in the presented configuration is available with a corrugated surface. If you believe the opinion of buyers, the handle is long and it is convenient to use it.
Directly the holder in the construction is available. In this case, only one exhaust valve is installed. The protective cover is standardly located at the top of the housing. The stub for the model is used ordinary. A rollover system is provided by the manufacturer. The lining under the piston system is fully rubber. The block of this model has a U-shaped type. If we talk about general parameters, then the maximum lifting height is at the level of 140 mm. The price of this rolling jack 3 tons (photo shown below) fluctuates around 3500 rubles.
Model "Bison"
Considering this rolling jack 3 tons, a description of it should start with design features. A device with a wide heel is made, and therefore is in great demand. If you believe the opinion of customers, the model is equipped with a solid frame. The length of the beam in this case is 28.5 cm. The bearing support itself is used with the rubberized overlay in the presented configuration. The handle of this jack has a fixed type.
The holder of the model is installed, and this is an important advantage. Also, this model is in demand due to the low landing. The minimum lifting height is 125 mm. The protective cover in the jack is installed in the upper part of the housing. In total, the model has two racks. The piston system is located at the handle. There is no tray for storing tools in the presented configuration. The frame in this case is set U-shaped. The front brackets are mounted as standard on the brackets. This rolling jack of 3 t "Bison" costs no more than 3400 rubles.
Features of the Matrix Model
This rolling jack 3 t "Matrix" reviews has good. Its peculiarity lies in the presence of a handle of small length. It is also important to note that this model is compact in size. There is no rubber pad on the handle. If we talk about the parameters of the device, it is important to mention that the minimum lifting height is 122 mm.
The wheels of this jack are used with a polyurethane coating. The beam length is only 25 cm. The heel of this model is provided with a diameter of 3.5 cm. The plug in this case is used open type. The strength of the frame deserves special attention. The thickness of the metal at the base is 0.2 cm. A rolling jack of 3 t "Matrix" will cost the user about 3200 rubles.
Summarizing
Given all of the above, it should be noted that for the average motorist Jack "Bison" is ideal. In use, it is quite simple, and the heel of the manufacturer provides for high-quality. You can still consider the device "Matrix". In the market it is inexpensive, therefore, is also in demand.