Every second person is familiar with this situation: he came to his home, but the lock does not open or the key is simply missing. And what to do in such a difficult situation? Change the lock in the front door or perform any other actions? Depending on the specific situation, several simple options have been developed. Sometimes you can cope yourself, without outside help.
What to do?
In case of losing the key, you need to change the lock, but for now use the tools that are at hand to open the front door. Depending on the structure, certain and simple manipulations are carried out:
- Using a drill. Drill a small hole above the keyhole. This is done in case of equipping the front door with an internal lock with a cylinder. After drilling with a master key, constipation clings and the hook moves. Such a hole can also be drilled in the cylinder. A small piece of wire is inserted into the hole and cranked toward opening the door lock.
- Use a simple screwdriver. If there is a tongue in the locking mechanism, a screwdriver is an effective tool. The tool must be inserted in, hooked on the tongue and driven into the keyhole. At the same time, the door reaches for itself, and then opens. Instead of a screwdriver, you can use a card made of plastic.
Actions before replacing the lock
When using a level lock , the following procedure is required. This method is completely different from the instruction on how to change the ignition switch, so be careful to refer to the instructions.
Changing the ignition switch is another. Necessary:
- Loosen bolts.
- A key in position No. 1 is inserted into a completely new ignition switch.
- Next, mount to the steering column.
- If all is well, then the bolts are tightened until the heads break.
And changing the door lock is much easier:
- Pull the door handle toward you, slightly, moving the door away from the frame as far as possible.
- Carefully insert a thin tool into the slot.
- Slide the levers inside the door lock.
If there is a door lock with a latch in the form of a handle, it is required to unscrew the locking mechanism and carefully remove it. Then the metal panel that closes the mechanism is removed, and a screwdriver or stud compresses the latch, helping to open the front door.
Remember: to prevent unnecessary problems with the lock, you need to purchase a mechanism without a keyhole, since in the modern world this is possible. Today provided a huge selection of goods.
Lock Replacement Tools
The second common problem in which it is impossible to open the door is a broken key in the keyhole. This can happen due to various and various reasons, which means that the solution options will be completely different. Consider many questions: how to change the larva in the lock, what tools are needed and much more.
What do you need?
When carrying out a door lock replacement yourself, you need to have at least simple tools on hand. When replacing, the following are required:
- Pliers.
- Saw.
- Jigsaw file.
- Scrap.
- Screwdriver.
- Drill.
Of course, such tools necessary to change the door lock larva may not be at hand. But then it is worth resorting to the services of a neighbor on the landing.
The procedure for replacing the lock
To replace the lock, certain tools and actions are used. How to change the lock or how to remove the key? Here are popular solutions to problems and solutions.
- When replacing, the following actions should be followed: you need to remove the larva, remove the bolt at the end of the bar, then the larva can be easily and easily removed.
- Now it’s worth dismantling the trims: unscrew the fastening screws, remove the handles and trims.
- The next step is to unscrew the fasteners and very carefully remove the door lock housing.
- With the mechanism that was removed, you need to urgently go to the supermarket or the nearest hardware store to purchase a similar lock (this will save you from the most difficult fitting work).
- It often happens that when acquiring a brand new door lock there are incidents. It is slightly different from the previous one, and replacing it will be a bit problematic. But nothing! This can also be dealt with! Will have to customize everything. We try on the brand-new case in the groove that exists, and look through whether its expansion is important. The housing should never touch the walls.
- The next step is the fitting of the end plate.
- We drill holes of the diameter we need, then at the same time note the location of the holes under the larva of the new lock. Unnecessary immediately delete.
- After everything is adjusted to the elements of the castle, it is worth starting to assemble a brand new mechanism.
- We insert the case and fasten it with two screws on the end of the door. How to change the larva in the castle?
- We need to install a larva, tighten the fixing screw also on the end of our front door.
- Then insert the installation axis of the input handles and the latch drive, put on the handles with decorative strips and tighten them tightly with screws. Secure with a striking plate in the door frame.
- And the last touch in the work entitled "How to Change a Door Lock" will be that you need to check the smoothness of the door lock. We turn the key without any jamming, the crossbars move without any flaws. Everything is excellent and wonderful, the work was done efficiently and competently.
Conclusion
In conclusion, I would like to note that if it was not possible to change the lock on the door yourself, then you can and should turn to the services of a specialist. The craftsmen will perform everything by themselves efficiently and competently - they will arrive, take the key out of the internal or external lock and open the door or simply change the door lock. For this work they will take the minimum payment.