The segment of household appliances for the kitchen has always been and remains one of the main platforms for the introduction of advanced technologies. Microwaves, refrigerators, dishwashers, mixers, and many other devices are stably in high demand among housewives, motivating manufacturers to technically improve their products. In this regard, the Bosch MFW 45020 meat grinder deserves special attention . Reviews of this model indicate that the developers managed to endow it with good performance, as well as improve the basic quality of the device.
The German manufacturer used high-quality components, reinforcing the design with a reliable case. Nevertheless, any equipment that is operated in difficult conditions can last a long time only if the instructions from the manufacturer are observed. Based on these recommendations, as well as focusing on the opinions of the direct owners of this model, we can conclude the feasibility of its acquisition and increase efficiency in the process of use.
General information about the meat grinder
The model is a type of medium-sized home electric meat grinder. When it was created, the manufacturer did not so much take into account the trend of technological fashion, but introduced the best practices of traditional areas of production of kitchen appliances. As a result, the Bosch electric meat grinder got its usual appearance and controls familiar from the principle of operation. In terms of performance, no significant breakthrough was made either, although this parameter should not be considered as the most significant.
Users pay more and more attention to the quality of work, and not to power potential. That is, the average housewife, rather, needs a reliable unit of average power, rather than a high-performance machine, which fails regularly during operation. So, the MFW 45020 model belongs to the first category. Of course, in the process of long-term operation, the owners of this device have to look for spare parts for meat grinders to replace the failed ones. But the regularity of such operations in the case of Bosch is not as high as when working with most competitors.
Specifications
On the market you can find many models with higher performance, but in this case, the stability of the device allows you to cope with almost all the home operations that are assigned to the meat grinder. So, the Bosch kitchen meat grinder in the MFW 45020 series has the following characteristics:
- Dimensions - 400 mm in length, 285 mm in width and 283 in height.
- The power of the device is 500 watts.
- Power provided the shaft is locked is 1,600 watts.
- Productivity - per minute allows you to cook 2.7 kg of minced meat.
- The number of nozzles - 3 pieces, including a syringe for sausages.
- Reverse function - available.
- Case material - plastic base.
- Warranty - 12 months.
As you can see, at high speed, the model makes it possible to process about three kilograms of products. This potential is close to professional meat grinders, although in households, many ordinary users increasingly put forward such high demands on productivity. But it is important not to forget that for home models, intensive modes of operation increase the risk of breakdown. In turn, the safety clutch of the Bosch meat grinder provides reliable protection against combustion of the device, increasing its maintainability and working life.
Model design
The meat grinder is made in a classic style and outwardly does not particularly stand out. Unless the lack of a cord can cause suspicion. For him, a special compartment is provided in the housing niche - one of the Bosch ergonomic highlights. The dimensions of the device can be estimated as standard, but rather close to the compact models. Although at a height designers could not save. But this is not bad, since the high Bosch MFW 45020 meat grinder, reviews of which nevertheless note the saving of space, is conveniently located on cutting tables and placed in cabinets in the kitchen.
The material for the case is represented by plastic. This is also a standard solution, which makes it easy to wash the surface of the device and facilitates its mass. Continuing the theme of ergonomic advantages, one can note the presence of a capacious meat tray and a pusher made in a convenient form. It provides recesses for grip with your fingers, which increases the comfort of operation of the meat grinder. The case also has rubber feet that prevent slipping and a handle for carrying the unit. Assembly and disassembly of the device usually does not cause problems. So, if you need to clean the auger for a meat grinder, then the user will need only a few simple manipulations. After that, just press the special lever to lock the device.
Internal organization
All the main advantages of this technique are enclosed in a meat grinder. Its body is made of high-strength aluminum alloy, but users value it more for the absence of sharp edges and burrs - metal processing is impeccable. A feature of the neck of this chamber is its displacement with respect to the center. Unfortunately, the design features in this model are rare, but such a deviation from the standards is worth a lot. In the process of work, the displacement of the neck contributes to the quick penetration of pieces of meat into the auger for the meat grinder, which increases the processing speed. There is another small difference from the classic units, although it has long been used by advanced manufacturers of kitchen meat grinders. Throughout the chamber of the device, you can notice the presence of special protrusions - they also contribute to the effective grinding of products during their movement in the compartment.
Many will be surprised by the familiarity with the pusher, which performs a dual function. In addition to its basic task, it also acts as a container for nozzles. It would seem that nothing special, but such little things will be very pleasant in the process. But the pusher also has a drawback - when it is washed, water sometimes gets inside, because of which it is necessary to apply rubber gaskets between its cover and the body.
Instructions for working with the meat grinder
You can only start work if the meat grinder is installed on a flat surface. Then the power cord is pulled out and straightened out - it is necessary to leave only the length required for a free connection of the device. The prepared nozzle is put on the drive and rotated up for final fixation. After the loading tray is installed and the bushing of the screw for the Bosch meat grinder is securely fixed, you can connect the plug of the network cable. Also at this moment, depending on the volume of the planned processing, appropriate utensils for collecting minced meat should be prepared. During operation, only the pusher should be used.
Despite the high power of the device, it is possible that food may get stuck in the screw. As a rule, a motor lock occurs, after which it must be eliminated by switching on the reverse direction of operation of the unit. When the work is completed, you should wait until the motor stops completely and proceed with disassembly. Then the following parts are removed: pusher, tray, screw auger bush for Bosch meat grinder, nozzle and other elements.
Mincing machine
This procedure must be performed with all the working elements of the device after each product grinding operation. To do this, wait for the instrument to finish working and unplug the plug. Then you should wipe all external surfaces of the device with a damp cloth. For the effectiveness of the procedure, you should initially purchase detergents, taking into account the materials from which the Bosch MFW 45020 meat grinder is made. Reviews note that the plastic of the case is easy to clean, although it can be scratched by abrasives. With regard to metal elements, the situation is more complicated. At this stage, manufacturers cannot yet produce cutting elements with corrosion coatings. Therefore, such protection should be provided manually with each cleaning. For example, edible oil with an anti-corrosion effect is suitable. After initial cleaning, it is recommended to apply it to the screw, metal surfaces of the chamber, nozzles and other elements that may be susceptible to rust.
Parts & Repair
If we consider the most common problems in the operation of this meat grinder, then jamming and arbitrary shutdowns of the device will come to the fore. Actually, in both cases it is necessary to act according to one scheme. First, the device turns off, then the cable is removed from the network. Next, you need to disassemble the device in order to remove a particle of the product that could cause the malfunction. Professional repair of the Bosch meat grinder may be required if one of the work items has been deformed. By the way, the most common damage to bushings, screws and knives. And this applies to all meat grinders, and the German model is no exception.
As for the knives, it is included in the singular. Again, this part breaks less frequently than in other devices due to high quality. The knife is cast, and this significantly reduces the likelihood of its deformation. The auger, in turn, is made of two alloys - aluminum and steel. The adapter sleeve for the Bosch meat grinder is also made of metal. This solution increases the reliability of the model compared to other devices in the construction of which plastic parts are still used.
Positive reviews about the meat grinder
Using this meat grinder as an example, the Bosch developers have once again confirmed their well-deserved status as a reliable manufacturer. Users praise the model from different angles - from performance to ergonomics. Among the obvious advantages is the use of high-quality materials, which are equipped with a Bosch MFW 45020 meat grinder. Reviews positively characterize not only the work of metal parts in the chamber, but also the plastic case. The company did not completely abandon plastic, using its advantages as a light and practical material.
However, the largest number of laudatory opinions are expressed by owners of ergonomics. The presence of molds, compartments and niches for storing auxiliary and additional accessories of the meat grinder increases the convenience of its operation. At the same time, the creators thought not only about comfort, but also about security. Although there is criticism regarding the processing efficiency of “problematic” products, such situations are mitigated by the safety coupling of the Bosch meat grinder, thanks to which you can save the device itself and save time on fixing the problem.
Negative meat grinder reviews
If we compare the model with analogues or even competitors of the same class, then the shortcomings noted by the owners will be insignificant at all. Start their review is with functionality. Indeed, the manufacturer took the path of conservatism, which allowed to release a high-quality model, but with modest capabilities. For example, many housewives note that the Bosch electric meat grinder is not able to provide a modern grater and shredder function. Also, for all the advantages of assembly and configuration, many are saddened by the small number of nozzles, although perfectly executed.
The opinions regarding the noise of the device are ambiguous. The fact that due to the rubber feet minimizes the effect of vibration is obvious, but noise insulation is still not a strong point of the device. Well, in addition, it is worth noting the high cost. Similar functionality and performance have long been mandatory in the characteristics of models for 3-5 thousand rubles. What is better than a Bosch MFW 45020 meat grinder, the average price of which is 6-7 thousand rubles? Of course, there is a serious bonus in the form of German quality, but, in this case, you can pay a few more thousand and get in every sense a first-class meat grinder.
Conclusion
The main thing that characterizes the MFW 45020 model is ergonomics, acceptable performance and a high service life of parts. For the most part, connoisseurs of kitchen appliances are guided precisely by these indicators. The complex, but convenient design will provide ease of operation, the power potential will cope even with frozen minced meat, and the durability of the parts will postpone the time when it will be necessary to look for new spare parts for Bosch meat grinders. Of course, this model is unlikely to interest those who are tracking high-tech and advanced innovations in this segment. Rather, it refers to a practical and reliable technique. As for the cost, then, again, you have to pay for quality, proven over the years. Indeed, if we expand the functionality of a competitor similar in level, then the price tag will be not 6-7, but all 10 thousand rubles.