In almost every area of human activity pumps are used today, they are offered for sale by different manufacturers, but only some of them are able to withstand the competition. Among other well-known companies that are engaged in the production and supply of pumping equipment to the market, Oasis can be distinguished, the products of which will be discussed below.
Types of pumps of the Oasis brand
The Oasis pump attracts consumers with its quality and reasonable cost. However, before choosing it is important to understand the varieties and characteristics of this equipment. The manufacturer offers for sale pumps for heating, circulation, immersion and surface equipment, as well as devices for increasing pressure. Among others, the Oasis CR 25/4 model can be distinguished, which is capable of providing a four-meter head, and its throughput is 3.6 m 3 per hour.
If you need a pump for the heating system, you can choose the model CNP-15/9, which is used in pipes for cold and hot water supply, in systems for increasing the pressure of water, in the shower and other points of water intake. The Oasis pump is presented in modern stores also in the form of drainage equipment, as an example, we can consider the model DN 150/6, which effectively and quickly copes with the problem of flooding. The equipment is intended for pumping water from wells, pools and cellars. These options for pumping units will be discussed below.
Characteristics of the submersible pump brand SN 85/35
This submersible pump is designed to pump water from wells and wells, its price is 5000 rubles, and the power is 370 watts. The case diameter is 4 inches and the maximum flow rate in liters is equivalent to 85 per minute. The maximum pressure is 35 m, and the maximum permissible concentration of solid particles in a liquid per cubic meter is 100 grams. You can load this equipment to a depth of 35 m, and the number of impellers in the device is five.
Water can pass through the equipment, the maximum fraction of particles in which varies from 1.5 to 2 mm. The dimensions of the device can be important for an oversized well, they are 100x100x670 mm. The device weighs 11 kg. This submersible pump copes with the supply of water from wells and boreholes, the inner diameter of which can be 90 mm or more. Parts of the pump in contact with water are made of steel, this ensures a long service life and increased resistance to mechanical impurities in the water.
The pump will cope even with watering the garden or garden, supplying water from open reservoirs, wells and various reservoirs. The described well pump "Oasis" has many advantages, among them it is worth highlighting:
- low noise level;
- no change in performance with wear on the work surface;
- lack of harmful effects on the water supply system and the well;
- durability;
- high hydraulic efficiency.
Durability is achieved by the absence of rapidly wearing valves on the piston system. But the absence of changes in performance can be said that this relates to the flow and pressure of water. The increase in efficiency is due to less vibration.
Characteristics of the drainage pump DN 150/6
The Oasis pump of this model is able to deal with flooding problems. It is used for water, which contains impurities in an amount of 10% of the total volume. These can be contaminated particles, the fraction of which reaches 30 mm. The device will be able to pump water from a depth of 8 m, in addition, it can be used for irrigation and watering the garden. This drainage pump "Oasis" has a capacity of 4 kW, and the maximum pressure is 6 m, and plastic is used as the body material.
The maximum immersion depth is 8 m and the cable length is 10 m. The pump must be installed vertically before use. Some consumers are interested in overall dimensions, height, width and depth of the device are 170x158x313 mm. The unit has compact dimensions and low weight, the last of which is 3.79 kg.
Characteristics of the circulating surface pump brand CR 25/4
The surface circulation pump is capable of providing a maximum pressure of 4 m and is powered by 220/230 V. The rated power is 36 W, while the power consumption is 72 W. The quality of the pumped water is subject to special conditions, it must be clean, and its allowable temperature can vary from -10 to +110 ° . This Oasis circulation pump has an outlet diameter of 1, inch. The installation is horizontal, and the weight of the equipment is 2.68 kg. The ambient temperature is quite extensive and can reach 40 ° C. You can install the equipment at one of three speeds, depending on what result and in what time frame you want to achieve.
Characteristics of the CR 25/6 Model
This Oasis pump is a surface circulation equipment with a maximum head of 6 m. The mains voltage is 220/230 V, while the throughput is 2.4 m 3 per hour. Nominal and power consumption are 40 and 90 watts, respectively. Requirements are made to water quality: it must be clean, but the permissible temperature varies from -10 to +110 ° . When connecting the device, you may need an outlet diameter of 1 inch. Before operation, the device is installed horizontally. You may also be interested in weight, it is 2.55 kg.
Oasis pump reviews for increased pressure
The CNP-15/9 pump model is designed to increase the pressure in the pipes of cold and hot water supply. According to users, the equipment copes with its tasks. You can use the device in a water supply network and open systems. This Oasis pump effectively increases the water pressure before entering washing and dishwashers, as well as heaters. The main field of application of this device, as buyers emphasize, is to increase the pressure in central water supply systems, private houses and apartments. Therefore, the power of such a device is more impressive compared to the circulation equipment. It is also able to work with impressive water pressure. The maximum power is 120 W, and the mains parameters are as follows: 220/50 V / Hz. In one minute, the pump will be able to pump 25 liters of water, and the maximum pressure will be 9 m. The maximum working pressure in bars is 6, and the diameter of the connection connector is 15 mm. As buyers emphasize, the temperature of the pumped liquid can be equal to 110 ° C. This pump "Oasis" works in one of three speeds, which you can adjust yourself.
Cost of equipment
When choosing a pumping unit, the consumer, first of all, pays attention to the cost. After all, not only characteristics are important. Thus, the Oasis pump brand CR 25 / 4-180, which is designed to increase the pressure in the heating system, will cost 2,400 rubles. The CR 25 / 6-180 pump with more complex functionality will cost the consumer 3,100 rubles. If we are talking about a centrifugal pump PT 60 / 37C yes, then its cost will be 5100 rubles. Another centrifugal pump brand PT 60 / 37N has a price tag of 5300 rubles.
Conclusion
The Oasis pump, reviews of which are often the most positive, is chosen by consumers rather willingly. This is due not only to qualitative characteristics, but also to an acceptable cost. For example, a centrifugal pump PT 60 / 37N costs 5300 rubles. It is made of stainless steel and is recommended for irrigation of lawns, plots and irrigation of different territories. With it, you can pump water from any tanks, water pipes and wells. It is noteworthy that this equipment is universal, because it can be used for water supply systems of private houses.