Everyone wants to equip their home as comfortable and practical as possible. And in this regard, seriously approaches the choice of material with which to finish. And so that all stages of the work are as successful as possible, you must correctly remove the previous coating.
That is why it is important to know how to properly dismantle the stretch ceiling. Although it is quite durable and retains its external qualities for a long time, there are situations when it needs to be removed. For example, neighbors flooded, you need to replace electrical equipment, or you just want to add new colors to the design of the entire room.
The stretch ceiling is famous not only for its strength, but also for the ability to dismantle the reinstallation if necessary. If all the work is done correctly, the sheet will not wrinkle or sag.
Determining the type of mount
In order to properly dismantle the stretch ceiling, you need to find out with what kind of fastening the work was done. It is also worth considering the type of material. Cloths are made of PVC coating or fabric.
- Harpoon mounting method. Masters most often use this method, but it is suitable only for a vinyl ceiling. When removing the coating, it does not deteriorate and is perfectly preserved until the next installation.
- The wedge method is suitable for all varieties of material. The main disadvantage will be practically zero probability of the reverse mounting of the structure. To do the work, you need to not only carefully knock out the wedge, but also return it to its place.
- The clip-on method is practiced for fabric coatings and, like the harpoon, allows you to use the material several times.
Necessary tools
Before you begin work, which includes installation, dismantling the stretch ceiling, you need to prepare all the working tools:
- gas bottle;
- heat gun;
- screwdriver;
- drill;
- roulette wheel;
- spatulas;
- square;
- masking tape;
- clip;
- construction clothespins;
- stepladder or ladder;
- elongated pliers.
Step-by-step instruction
In order to do the dismantling of the stretch ceiling with your own hands, you need to know the technology of work and the sequence of all actions.
- To get to the place of attachment, you need to remove the baseboard with which the decoration was made.
- We remove the cut rates that are set between the wall and the stretch ceiling.
- Be sure to warm the film with a gas gun. If you skip this item, then the work will not be possible without damaging the material.
- The next step is to directly remove the coating. For this, the master needs to stand on the stepladder and warm up the place from which the dismantling of the stretch ceiling will begin. It’s best to choose the corner of the room. Then you need to hook the film with pliers with a hook and gently pull it to the side.
- After the coating is disconnected from the ceiling, you need to remove it from special mounting profiles. Before each step, the material is heated with a heat gun.
The fabric stretch ceiling is very easily dismantled with a thin spatula. It is only necessary to bend the finishing profile and remove the mounting clip.
Professionals Recommendations
- In order to more quickly and efficiently perform the dismantling of the suspended ceiling, it is necessary to carry out work by a team of craftsmen. It is almost impossible to cope with this task alone without damaging the coating.
- It is advisable not to use tools with sharp edges, because they can damage the material and make reverse installation impossible.
- Before starting any action, the room needs to be warmed up with a heat gun so that the film stretches out and gives in to the master’s hands as easily as possible.
Reinstallation of the removed coating
After the problem is fixed, the material removed without damage can be replaced. To do this, be guided by the following sequence of actions:
- Along the perimeter of the room, special profiles are fixed. They are also called baguettes.
- Be sure to warm the room with a heat gun.
- Using construction tongs, fix the polyvinyl film in the corners.
- After which the material is heated using the same heat gun.
- Next, using a special spatula, you need to fix the coating in a baguette.
- At the final stage, decorative finishes are made using ceiling plinths.
- To make the ceiling smooth and beautiful, you need to smooth out all the bumps using a heat gun, which should warm up all the problem areas. This rule applies only to PVC material.
- Dismantling a stretch ceiling made of fabric does not make mistakes, since it will be impossible to fix them. After fixation, the material does not lend itself to any changes.
Chandelier Installation
To correctly fix the chandelier on the stretch ceiling, you need to make a lot of effort, since this work is very neat and painstaking. You need to prepare before installing the coating itself. Now stores offer a wide selection of various fixtures, which also differ in the way of fastening, so it is better to purchase an electrical device in advance.
- Most often, a hook is used as a fixation. It must be fixed on the ceiling surface so that it is not noticeable. Therefore, this work must be done before installing the coating.
- After installing the ceiling, it is necessary to glue the thermal ring to the place where it is planned to hang the chandelier.
- Then it is necessary to cut the film in the middle of the circle and pull all the wires into the resulting hole.
- Then follows the direct installation of the appliance itself and its connection to the network.
- As a decor, it is necessary to close the place of attachment with a special plate.
- Be sure to check the performance of the chandelier so as not to do the work done twice.
It is unlikely that it will be possible to dismantle the stretch ceiling lamp without consequences, because the place where the hole was made cannot be returned to its original form. Therefore, it is very important to think over the chandelier mounting section in advance.
The cost of work
So, we examined how to dismantle a stretch ceiling. The price of work is approximately 70-80 rubles per square meter. By giving preference to professionals, you can be sure of the quality of work. But they can also be produced independently, it is only necessary to follow clear instructions, perform all actions with extreme care, trying not to damage the coating. Although the dismantling of the stretch ceiling refers to painstaking activities, with a little effort, every man will be able to complete this task.