Docke products have long been popular in the domestic market. The gutter system of this manufacturer is made of high quality polyvinyl chloride, galvanized steel and copper according to German technology. The mentioned equipment is manufactured in the factory according to European quality standards. Using the Döke systems, you can mount them fairly quickly and easily. And the wide color gamut, as well as exceptional reliability, are additional advantages, which is why the drains of this company are widely used. Having visited the store of relevant products, you can choose the system of this manufacturer in one of two options, namely: Docke standart and Docke lux. Gutter system can be purchased by you for internal and external installation.
Why choose Docke drains
You might also be interested in Docke products, the gutter system from this manufacturer has many advantages. Among the former, one can single out a long warranty that reaches 25 years. Installing such systems is very easy, this is one of the main advantages. Some users claim that such devices are almost perfected, and the design is thought out.
The connection of parts is carried out by glueless technology, with rubber seals that provide complete tightness. The design of the gutter is symmetrical, which makes it universal, so the plugs at the ends and corners are interchangeable. Fittings and pipes are fixed using a universal clamp, which provides free fastening and tightly fastens fittings. It can be attached to the wind board and use metal extension cords for this.
It is no coincidence that Docke products are so popular among consumers today. The gutter system of this company has little weight when compared with metal products. The weight of 1 running meter of a plastic pipe is 0.69 kg. This value is so small that the load from it is almost imperceptible. This allows you to effectively use such systems for reconstructed buildings.
It should be noted and the ability of the drains to withstand extreme climatic conditions. They can be operated at temperatures from -50 to +50 ° C. The surface of the material does not fade, and the foliage does not stick on the inside of the drainage elements thanks to the effective Clear Tube technology.
Features of the installation of the drain
If you have chosen Docke brand products, you can install the gutter system yourself. The gutters must be attached to the windshield using plastic brackets. The connector, the funnel and the bracket itself should be fixed to the windshield using self-tapping screws. In the bracket, the gutter is fixed as follows. At the first stage, the edge of the edge of the gutter, which is close to the board, should be inserted into its clamp. Then it is lowered into the receiver and squeezed in place of the clamp, this will lead to the edge until it clicks.
The brackets must be placed at the level of the cord, which is pulled between the support and the funnel. The height difference between these points should be 3 mm per meter. If this method of fastening is used, the junction of the roof with the board should be strengthened, this will prevent the pulling out of fasteners under load from snow.
Mounting method on a metal bracket
The Docke gutter system can also be installed without a windshield, using metal brackets. This method is used for those roofs that have an insignificant step of the crate. At the first stage, the bracket is fixed to the roof structure. The edge of the gutter, which is closer to the roof, should be placed under the hook of the support and lowered into the receiving socket. The clamping strip is folded back and reinforced with the opposite edge. The height difference can be ensured by arching the bracket. As the brackets move away from the final one, the step between the bending point and the end of the supporting part must be reduced.
Using extension cord and plastic bracket
This option is used for roofs that are lined with a large step of the crate. Extension and fold lines should be spaced at equal distance. The bend should not be closer than 1 cm from the point where the clamping plate of the bracket is fixed.
Features of the installation of the drain
When the Docke gutter system is installed, the question arises of how to ensure the necessary position of the elements relative to the roof. The overhang of the roof should be above the gutter at a distance that is from 30 to 50% of its diameter. The gap should be maintained between the support, the continuation line of the roof and its upper part. Its width can be from 25 to 30 mm. The gap can be achieved by bending the extension cord or by moving the plastic bracket.
With a vertical load, quite often masters decide the question of how to ensure resistance to deformation. To do this, the distance between the brackets should not be more than 600 mm. The funnel must be fixed at two points, and the gutter connector is fixed at one point. The step between the end part of the corner element and the nearest bracket should not be more than 150 mm. The distance between the near bracket and the plug must not exceed 250 mm.
Installation Instructions
The Docke gutter system, the installation of which provides for the compensation of thermal expansion, should be installed taking into account the distance between the structural elements and the surface of the plug 30 mm or more. The gutter should be located in the mating elements before the inscription, which reads: "Insert so far." For ease of installation at the edges of the lines there are micro-supports. The mating surfaces must be cleaned of contamination prior to installation. Sealing gaskets must be tightly installed in the nests, bringing them to the edges. It is also important to install plugs.
Consumer Reviews
Docke gutter systems, reviews of which are most often only the most positive, are able to withstand the effects of an external aggressive environment. Other materials that form the basis of modern systems for this purpose are not capable of boasting such a characteristic. Consumers note a fairly strong connection between the elbows of the pipes and an impressive diameter, which ensures their high throughput.
There are also disadvantages. As buyers emphasize, they are expressed in the fact that PVC is not a sufficiently durable material, among its disadvantages is low strength. It may be sensitive to shock and physical impact. However, you can be sure that if water inside the system is frozen, then it will not be able to damage the pipe.
Conclusion
If you are interested in the Docke gutter system, the installation instructions of which were described above, then you can compare it with metal counterparts. The latter are not able to restore shape after exertion. Consumers claim that dents remain on such surfaces, which cannot be said about plastic gutters, after any load they are able to completely restore their original shape, remaining intact. At the same time, metal gutters cannot be accidentally broken.