Sandwich panels are called building material made in the factory. They allow you to build various types of buildings in record time. The product has long appeared on the domestic market. Due to the large number of positive characteristics, it is in great demand. The material consists of two plates, between which there is an insulation layer. Therefore, in our article we will try to understand: what are the hangars from the sandwich panels. How justified is the use of the material in this case? What are the steps involved in assembling a warehouse of this type?
What can be hangars made of panel material?
Not one production enterprise can do without a special warehouse for finished products. Recently, pre-fabricated hangars made of sandwich panels began to be used for commercial purposes. The design is very convenient in that it is assembled as soon as possible, if necessary, it can be disassembled and transported to another place. In addition, it has a low cost. Hangars can be cold and insulated, depending on the purpose of the room. For the first buildings, galvanized steel or a profile of various colors is used.
At the same time, the walls of the
insulated hangar are equipped with heat-insulating material, which helps maintain a favorable climate in the winter. During severe frosts, the temperature inside such a room varies from 18-20 degrees of heat. Such buildings can have a variety of shapes and sizes. Additionally, you can install internal partitions, gates and windows. During the assembly of the room, its elements are securely fastened together, which eliminates the possibility of deformations and distortions.
The positive aspects of the construction of hangars from this material
Prefabricated buildings gained their popularity thanks to a number of positive features. Namely:
- The assembly of hangars of this type can be carried out at any time of the year. The materials that make up the panel are not afraid of temperature changes. Therefore, the room can be assembled even in harsh climatic conditions.
- The walls of the "sandwich panels" reliably hold warm air inside the building. They do not miss extraneous sounds.
- The construction of hangars from sandwich panels does not require the participation of a large number of workers and the involvement of complex, expensive equipment.
- The material is not afraid of precipitation, is not subject to corrosion, does not form rot. Therefore, the construction can last up to 30 years without requiring repair.
- As mentioned earlier, hangars from sandwich panels assemble very quickly. A team of experienced craftsmen can install this design in a couple of weeks. At the same time, the premises will not be inferior in their characteristics to hangars built from more expensive materials.
- The light weight of the panels does not require pouring a heavy-duty foundation, which reduces construction costs.
- Fire safety of the material guarantees the safety of products inside the warehouse.
In what areas can such facilities be used?
In addition to storage purposes, hangars from sandwich panels can be used to equip temporary or permanent workplaces. The ability to equip the premises with various communications allows you to equip offices, shopping and entertainment centers, gyms and repair shops in them.
The strength and stability of buildings assembled from sandwich panels allows you to install heavy industrial equipment in them for the production of various products. At the same time, the noise-absorbing qualities of the material will not let loud sounds go beyond it, which is very important when there are residential buildings nearby. Thanks to the excellent thermal insulation abilities of the panels, it is comfortable to be in such hangars at any time of the year. That is why they can be used not only for commercial purposes, but also for permanent residence.
What should I look for when building a hangar from sandwich panels?
The materials used to assemble the panels do not have the ability to let air through. On the one hand, this makes the frame buildings very warm, and on the other, a greenhouse effect is created, condensation accumulates in the room. For this reason, hangars from sandwich panels require the installation of powerful forced ventilation. It is also worth paying attention to the fact that in places where the plates are joined, there is no insulation. Therefore, it is extremely necessary to install additional thermal insulation there even at the stage of assembly of the hangar.
Construction stages
Construction of hangars from sandwich panels, like any building process, it starts with a detailed diagram. Then they are engaged in the preparation of the construction site and foundation work. If heavy equipment is planned to be used in the hangar, a solid monolithic base is made. At the next stage, a metal frame is installed on which the panels will be mounted. Gates and end walls are going. The frame is sheathed with panels, the resulting cracks and joints are processed with mounting foam. The finished structure does not need finishing work both from the inside and from the outside.
How profitable is building sandwich panels?
A great opportunity to reduce the cost of building production or storage facilities is opened by hangars from sandwich panels. Prices for materials for the construction of capital buildings are more than 5 times higher than the cost of material for frame technology. So, one square meter of a cold room will cost the owner 4-5 thousand rubles. The cost of a warm hangar, depending on the list of incoming services, varies between 8-18 thousand rubles.
The construction of the hangar from the sandwich panels will also cost inexpensively. The price for assembling such a room is much lower than the cost of masonry. So, having analyzed all the above information, we can draw the main conclusion. Sandwich panel hangars are a great opportunity to optimize waste at the initial stage of doing business and at the same time get a solid and reliable room.