The assortment of the modern market is constantly replenished with new and new materials that are used today in construction not only by professionals, but also by private craftsmen. In the list of traditional and budgetary solutions for the bath, it is necessary to highlight products from such types of wood as:
Recently, this list has also been replenished with abacha, which can be called a rare variety.
Overview
Abash is a giant tree that grows in the equatorial forests of Africa. The crown is only at the very top, so the trunk is devoid of knots. This cannot but please the joiners and carpenters. Wood can have a color from creamy white to straw yellow. There is no particular difference between the core and the sapwood.
In Russia, this wood appeared in the 90s. Its cost is quite high, but it gained popularity with consumers very quickly. Abash for a bath is like a mahogany for a house. This material is elite and costs more than traditional types of wood. Such a high cost is due to the place of growth, because the path to Russia is not a short one.
Wood features
Abash for a bath is excellent, because it has low thermal conductivity, thanks to this, even under the influence of high temperatures, boards do not burn human skin in a sauna or bath. However, this breed has many other useful properties, among them it should be highlighted:
- resistance to mechanical stress;
- non-shrinkage;
- compatibility with wood of other grades;
- color consistency even with prolonged use.
When heated, the material will not emit tar. For a long time, it does not deform. The wood will remain dry even if the humidity in the room reaches 12%. From the ends, the material slowly absorbs moisture, but if you compare with aspen boards, the latter become quite wet.
Abash (this indicator is very important for a bath) has a high density, but lends itself well to processing, so it’s easy to manipulate it. Screws are good in wood. You can hammer in nails without fear that the material will become cracked. It can be tinted. This type of wood can be used not only for facing the internal surfaces of a sauna or bath, but also for home decoration. The material has low thermal conductivity, so it will be cool in the rooms in summer and warm in winter.
Reviews
Abash for a bath has many positive characteristics that cause appropriate reviews. For example, the ultimate load on the material can reach 280 kg per square centimeter. On bends, this value is 528 kg per square centimeter. Consumers also like high density, which reaches 390 kg per cubic meter.
Negative reviews
Abash for a bath is an elite type of wood, but it has its drawbacks. The main disadvantage, according to buyers, is the high cost. In addition, this wood is marketed in small quantities. This is because Africa is a turbulent continent. Consumers emphasize that the area of growth of this tree is reduced today, this fact cannot be called sad.
Lining installation technology
Lining abash for a bath is great. You can do its installation yourself. You can use rails for this. They allow you to wall clad pretty quickly and efficiently. If you need to update the surface, you can do it without difficulty.
Each subsequent board of the lining is installed in the groove of the previous one, and a galvanized kleimer, which is a special clamp, is put on the protrusion. It is fixed to the battens rail with a screw and a self-tapping screw or galvanized nail. Abachi for a bath, the price of which is quite high, is established by a certain technology. At the final stage, it involves trimming the last product so that the master has the opportunity to freely insert the panel into the remaining space. Fastening is carried out with nails or self-tapping screws.
The second option to install the lining
To date, there are several ways to install the lining in the bath. You can use another technology that involves fixing the last elements in such a way that the place of fasteners remains open.
In the product, drill holes for the heads of self-tapping screws. It is necessary to deepen it by 1/2 of its thickness. As soon as the screw is tightened, the hole is closed with a wooden pin and ground. It is important to take into account during the operation of the steam room that the attachment points can dry out and become more noticeable.
Use of nails during installation
Lining abash for a bath, the price of which is 270 rubles. per linear meter or 3240 rubles. per square meter, can be installed with nails. However, it should be borne in mind that this approach quite often leads to marriage. It is hard to imagine that not a single element will be spoiled in doing so.
If the lining length is 2.5 m, then you will have to hammer in about 6 nails with a product width of 100 mm. If you are faced with a wall whose length is 10 m, then 600 pieces will be needed. The master must have special skills to carry out work without marriage. The nail should be inserted into the groove and driven further into the mounting rail. The hat is recessed inward by the end plate so that it does not interfere with the installation of the next element.
When choosing abachi for a bath, the price must be taken into account. For example, thermal material extra will cost you 325 rubles. per linear meter or 3900 rubles. per square meter. In this case, as in the previous one, we are talking about products whose dimensions are 12 x 92 mm.
Conclusion
Finishing the premises in the bathhouse, as in the case of rooms for other purposes, is the final stage of construction and repair. In order to make the walls not only aesthetically attractive, but also of high quality, you can use abash for a bath, the price in Moscow of this material was mentioned above. Although it is quite high compared to analog solutions, consumers are choosing this cladding more often, because it has unique properties.