For many years now, fuel briquettes, reviews of which you can read below, act as the most economical and popular fuel that is used in several countries around the world. Products are made using exclusively natural materials, including sawdust, husks of sunflower, rice, buckwheat, as well as oat husks, etc. Such briquettes do not have harmful substances or all kinds of adhesive compositions among the ingredients. In the manufacturing process, they are pressed under high pressure and when exposed to significant temperatures.
Fuel briquettes, reviews of which are recommended to be read before purchase, may have the shape of a cylinder, which facilitates use. They have a wide scope, and can also be used for all varieties of boilers, furnaces and heating equipment. They burn excellently in grills, fireplaces and stoves. Consumers choose similar briquettes also for the reason that with their help it is possible to ensure a constant temperature in the combustion process for 4 hours.
Fuel briquettes, reviews about which often enough are only positive, have minimal impact on the environment at the time of combustion, this is especially true when compared with conventional solid fuel with the same calorific value. The described material is characterized by a lower ash content of 15 times, which is only 1% of the total mass. The production process is based on the process of pressing pre-ground waste, and lignin, which is contained in plant cells, acts as a binding element.
Reviews on the duration of burning
If you decide to purchase fuel briquettes, it is recommended to read reviews about them before going to the store. It is important to consider that these products, as noted by consumers, are characterized by a significant burning time, which is especially evident when compared with traditional wood. Thus, laying in heating equipment can be done less than 3 times. Burning occurs with minimal smoke formation, the material does not spark and does not shoot. At the same time, a constant temperature is observed throughout the entire burning period. After combustion, coal is formed, which is also true for ordinary wood. In the future, the combustion product can be used for grilling or cooking kebabs.
Calorific value reviews
Buyers choose fuel briquettes from sunflower husk, reviews of which you can read in the article, for the reason that their calorific value is much higher compared to ordinary wood. Practice shows that the mentioned parameter is equal to that possessed by coal. Barbecue lovers and grill owners emphasize that when fat enters the coals formed after the combustion of briquettes, ignition does not occur, the material continues to burn or smolder with a low even flame. It should be noted and the constancy of temperature. Heat transfer is 4400 kcal.
Environmental Reviews
Fuel briquettes from sunflower husk, reviews of which you should be interested in before purchasing, are environmentally friendly. It is this characteristic, according to customers, that largely determines the choice in the direction of the described fuel. All kinds of additives are not used in production, and harmful substances are not released into the environment during combustion, this is especially true if we compare with solid fuel with the same calorific value as coal. Ultimately, coal can even be used as a mineral fertilizer.
Reviews of briquettes made of sunflower husk
Fuel briquettes made of sunflower husk, reviews of which will help you make the right choice, have a lot of advantages. According to the European classification, such briquettes can be classified as fuel that does not form smoke. This attracts owners of fireplaces and heating equipment that is installed inside the house. Consumers choose these products also for the reason that they are very compact, which is important not only for a private, but also for a small country house. Among other things, oversized fuel is very convenient in transportation, it is easy to load and unload, and transport services do not have to pay too much. Fuel briquettes, reviews of which you will become aware after reading the article, are suitable for cooking any food in barbecue, barbecue and grills. For the reason that no carbon monoxide is emitted in the process, cooking can also be done indoors, as regards not only the apartment building, but also the veranda, restaurant or cafe.
Reed briquette reviews
If you are interested in fuel briquettes from reeds - who drowned, reviews and other information - all this you can read below. Buyers claim that 1 kilogram of material will be enough for 7 hours of continuous burning. In this case, heat transfer will be 6550 kcal / kg. Owners of boiler equipment say that the device will have to be cleaned only once every two years. The resulting ash, like coal, can be used as an environmentally friendly fertilizer.
You can ensure autonomy by using such fuel, as the equipment will not be dependent on companies that supply electricity and gas. There is no dependence on external conditions, such as damage to pipelines, power lines, theft, etc. Consumers do not face the need for long-term coordination, which is carried out before connecting electric or gas equipment.
Fuel briquettes from reeds, reviews of which resonate with positive characteristics, have a high density. In the manufacturing process, technology is used, which involves screw pressing. As a result, it is possible to achieve a density in the range from 1.1 to 1.2 t / m 3 . The surface consists of a sufficiently strong crust, which eliminates damage and rupture of the briquette during transportation and storage. Transportation can be carried out by laying the product in two tiers, since the material almost does not form crumbs. The existing crust is able to reduce the penetration of moisture inside, which makes the use of briquettes more comfortable.
Reviews about briquettes "Pini-Kay"
Pini-Kay fuel briquettes, reviews of which in most cases are only positive, differ in that they do not stain the surface that comes into contact with them during transportation and storage. High density can also be distinguished, which is equivalent to 1200 kg / cubic meter.
Ash content can reach 3%, which is one of the lowest indicators. If we talk more about density, then it is 2.5 times higher than this parameter inherent in wood. The bulk density of the material is 1000 kg / cubic meter. These consumer figures are often interesting, buyers compare this figure with a bulk density of 300 kg / cubic meter. This indicator, according to the owners of heating equipment, makes it easy to transport material over impressive distances. Due to the ideal shape, as well as small dimensions, it is possible to tightly stack briquettes on pallets, pouring them through special sleeves if necessary. This allows you to fully automate the process of loading and unloading, as well as further burning of this type of fuel.
Pini-Kay fuel briquettes, reviews of which will become known to you after reading the article, should be stored separately from other substances and materials. If the conditions are met, the products can be stored indefinitely until use. The temperature in the indoor warehouse should be equal to the limit of +5 to +40 degrees. In this case, the relative humidity can vary from 30 to 80%. The interaction of products with water and aggressive substances should be excluded. Consumers argue that to extend the shelf life it is necessary to exclude the effect of ultraviolet radiation on them.
Reviews of briquettes RUF
RUF fuel briquettes, reviews of which correspond to the characteristics of the material, easily decompose. Owners of fireplaces, boilers, and stoves note that when using another type of fuel, you have to turn into a stoker, providing fuel every hour. In order to ensure smoldering, you need to reduce traction by closing the blower. When melting equipment, insignificant draft must be guaranteed, then a cold plug in the chimney will be formed, and the briquette will not smoke.
In this case, it is possible to melt the device without first warming up the duct. Using RUF fuel briquettes, reviews of which will be useful to read even before you visit the store, you can warm the room in a shorter time than with traditional firewood.
Features of the use of briquettes "RUF"
RUF fuel briquettes, reviews of which will be useful to read to any owner of heating equipment requiring ignition, differ in certain characteristics. For example, knowing that heat transfer is equal to 4500 kcal / kg, you can heat a house with an area of 45 square meters for one hour using one briquette. The weight of the latter should be one kilogram. Thus, to obtain 10,000 kcal it will be necessary to use 5 tons of firewood, of which almost half will be with water. To obtain an equivalent amount of heat, you will need to use briquettes in a volume that varies from 1.5 to 2.2 tons. In view of all of the above characteristics, it can be noted that for the storage and transportation of briquettes an area will be required 2 times smaller than that which would be required for the same purposes using ordinary firewood. This indicates that the consumer of briquettes benefits greatly and receives more impressive efficiency than when buying and delivering ordinary wood.
If we compare with coal, then to obtain heat of 10,000 kcal, it will be necessary to use the mentioned fuel in the amount of 2.2 tons.
Additional features of RUF briquettes
In shape, these products resemble bricks, in the manufacture of which the minimum requirements are imposed on the qualifications of personnel and the organization of production, which favorably affects the cost of the product. Among the minuses, the least resistance among all other briquettes to moisture and external mechanical stresses can be distinguished. Therefore, for this brand of fuel, high-quality packaging is necessary, if it is damaged, long-term transportation and storage become impossible. This is especially true for CIS roads, the level of which does not correspond to the European one.
Reviews about briquettes "Nestro"
Fuel briquettes "Nestro", reviews of which will become known to you if you read the information below, has a wide area of use. They are used when it is necessary to operate industrial equipment, as well as in railway transport. The bars may have an octagonal shape with a hole that is located inside. The length of the product is 250 millimeters, while the cross section is square, and has a side within 65 millimeters. The diameter of the circle is equivalent to 70 millimeters, and the hole has a diameter of 20 mm. The humidity of the product upon delivery should not exceed 9%, while the maximum value varies within 7%. Ash content is minimal and is 0.5%.
Consumers like the presence of a technological hole inside the products, which contribute to more intense combustion, while not requiring forced ventilation. This makes it possible to use fuel in equipment that is characterized by low traction. Products are manufactured using the technology of shock-mechanical pressing of husks and sawdust. The main difference between these briquettes is the absence of processing under the influence of temperature during pressing. If there is a need to use briquettes of a certain shape, then these requirements can be taken into account by the manufacturer.
Production is carried out using connecting rod mechanical or hydraulic presses. Fuel quite often has a cylindrical shape, and among the negative and positive characteristics, the same features that are characteristic of RUF materials can be distinguished. The cost of such products is relatively low due to the fact that the production process is inexpensive. Consumers note that from the point of view of technical features, these briquettes are inferior in many qualities to Pini & Kay fuel.
Conclusion
In general, fuel briquettes, regardless of brand, are resistant to moisture and mechanical damage. Some of them have less outstanding characteristics, while others, due to the high requirements for the production process, are better. Features of the material can be determined by the consumer by cost comparison. Only in this way, or by requesting a certificate of quality for products, you can understand which briquette is better and which product should be looked towards.