The Vodomet pump for a well is a multi-stage equipment with floating impellers washed by water. Water cooling is one of the important factors that prolongs the life of the device.
Description
The design has a built-in condenser, which is necessary to supply water from the well. Its inner diameter may be equal to 100 millimeters or more. It is noteworthy that such a device is suitable for operation in well conditions that contain an increased amount of sand. These pumps can be used with control by the level of filling the tank or by the level of pumped liquid from the automatic pressure control system. The source of water supply can be not only a well, but also an open pond, as well as a well.
Model selection reviews
If you decide to purchase a Vodomet pump for a well, you should be aware of the criteria used to select this equipment. According to users, it is important to pay attention to the numerical designation, the first figure indicates the maximum flow rate of water for one minute at the outlet in the absence of flow resistance. Looking at the second number, you can understand what is the maximum head in meters developed by the equipment when working "to a standstill."
If you have a Vodomet 60/52 pump in front of you, then, according to customers, this indicates that with a free spout, the equipment is capable of delivering 60 liters of water per minute. This volume is equivalent to 3.6 cubic meters per hour, whereas when the feed is cut off, the pressure will be 52 meters, that is, 5.2 atmospheres. This unit is almost never used in extreme mode, most often it is operated at the operating point.
The Vodomet pump for a well with a maximum flow rate of 115 liters per minute is used for wells and wells with high and medium flow rates. If there is a need to select equipment for water sources with a high flow rate, then you should purchase an option with a maximum flow rate of 150 liters.
General characteristics of immersion devices
Submersible pump "Vodomet" for the well has a high efficiency, it is ready to serve for a long time. This equipment has a powerful electric engine cooling system. The pump design has a cable that can be pulled through the top cover, which allows the equipment to be used in wells of even the smallest casing diameter .
It is noteworthy that these submersible pumps can work continuously for a long time, this is made possible by the presence of a built-in water "shirt". It provides the passage of water between the stator of the motor and the housing. The "water cannon" is capable of delivering liquid from shallow or deep. The devices have good tightness and are equipped with a thermal protector, which is responsible for the temperature of the equipment.
Characteristics of the pump brand "Vodomet Prof 60/32"
If you are interested in Vodomet products, a pump for the Prof 60/32 well can be purchased by you. It belongs to a series with increased productivity. Suitable equipment for water with significant sand content. It can be used only in those wells whose depth does not exceed 30 meters. The temperature of the liquid should not be more than 35 degrees.
Consumers who have decided to purchase this equipment should be interested in the capacity of a submersible pump, which is 470 watts. In one minute, it will be able to dispense 60 liters of liquid, the maximum amount of pumped sand will be equal to 2 kilograms per cubic meter of water. The Vodomet brand products have long become popular among Russian consumers, the pump for the Prof 60/32 well is a confirmation of this. Its body is made of high quality stainless steel, which ensures a long life of the device. However, in the process of using the unit, you must remember that the pressure should not be higher than 3.2 bar.
Characteristics of the pump of the Prof 55/50 brand
Having visited the store, you can find in a large assortment of goods that are manufactured under the brand name "Vodomet". A 55/50 well pump can be considered as an example. The depth of its immersion is 30 meters, power is 680 watts. Install the equipment vertically. As practice shows, the engine runs silently, and it is capable of pumping 3.3 cubic meters per hour. Do not use this equipment for dirty water, as in this case it may fail. The size of the filtered particles can be equal to a maximum of 1.5 millimeters, and the length of the power cord is equivalent to 20 meters. This data will help you when installing the device.
Characteristics of the pump brand "Dzhileks Vodomet 115/115"
If you are interested in the Vodomet brand, you can purchase a pump for well 115/115 for 14,300 rubles. This submersible equipment is designed to pump water from the well, while the fluid may be slightly contaminated. The maximum depth, as in the above case, is 30 meters. Productivity is 6900 liters per hour. An advantage is that the device can be used for small wells. With it, you can irrigate the garden or the garden, among other things, it is suitable for water supply in homes. The weight of the unit is 22.6 kilograms, which facilitates its installation.
This Dzhileks pump for a well, the photo of which is presented in the article, has a fairly wide area of use. It can be used in tanks as well as in open water. The equipment is perfectly adapted to difficult Russian conditions. To create it, the manufacturer uses durable and wear-resistant materials. For example, for thrust bearings , granite and ceramic are selected. As for such an important element as the impellers, a wear-resistant polymer is used for them.
Customer Reviews on the 115/115 Model
Products of the Vodomet brand have found their wide distribution among Russian consumers. A well pump, the reviews of which you can read in the article, is a patented product, and the quality characteristics are constantly being improved. To provide protection against engine overheating, water washing technology is used. And the liquid enters through the annular gap, which is located between the stator shell and the housing.
According to users, they like environmentally friendly materials at the heart of the design, among other things, it is important that this pump is not afraid of the abrasive effects of sand. This model has a mesh filter that purifies water during operation. Users emphasize that the 115/115 water cannon has enhanced durability. In appearance, this equipment is very attractive, has a modern design, which can be called an additional advantage.
Instruction for use
After reviewing the reviews, you can also pay attention to the products of the company "Vodomet". A well pump, the characteristics of which are presented in the article, should be used taking into account some features. For example, when pumping water, the temperature range is limited, you can use the equipment when the thermometer's mark is in the range from 1 to 35 degrees. In an hour, the device can be turned on and off 20 times. According to experienced users, it is very important to maintain the maximum sand content in the water. For the described model, this parameter is 300 grams per cubic meter.
Why it is still worth buying Vodomet pumps
The described devices have a lower cost in comparison with foreign analogues, many components and elements are the company's own development. But high-tech parts are also used in the production, which are supplied from other countries. Low cost (13-20 thousand rubles) and excellent quality - these are two factors that force consumers to purchase products of the Vodomet brand.
A well pump , the design of which is reliable and durable, can be used to supply drinking water, pump various types of liquids, equip sewage systems and irrigate crop areas. A wide range of applications attracts buyers who are interested in acquiring high-quality equipment for pumping fluid from a well.