Bath procedures can bring proper satisfaction only if the temperature in the steam room differs from that on the street. That is why its proper thermal insulation is of such importance. It should be insulated starting from the floors. But the event will be completely meaningless if you do not put in order the foundation of the structure. Otherwise, the cold will still penetrate the room through defects in its base. So, how to insulate the bath from the inside?
As you know, the foundation can be divided into the underground part and its base. Therefore, it can also be insulated in two ways. The part that is underground is best insulated with a layer of expanded clay, the thickness of which should be twice the thickness of the walls. From the outside, the base is easiest to finish with polystyrene foam, expanded polystyrene or use loose heaters for this, adding them to the finished concrete mixture for pouring the foundation. But how to insulate the bath from the inside, making the floors impenetrable for the cold?
How to heat the floors?
You should know that in the bathhouse you can lay either solid or ventilated floors. In the first version, the floors are laid as usual, leaving no gaps between the boards. The second option just provides for gaps with which the floor is ventilated, dries faster and maintains high performance for longer.
From the point of view of thermal insulation qualities, a solid floor is much more reliable, but its longevity leaves much to be desired. This is all the more true that the wood for the interior decoration of the baths should never be treated with any antiseptics. So how to insulate the bath from the inside, while maintaining the right balance between environmental friendliness and quality?
The correct device is a solid type of floorWith their proper laying, they use a structure that consists of four layers at once. For this purpose, rough floors are laid on the logs , as it should be soaked with antiseptic compounds. On top - mineral wool or fiberglass. They carefully cover everything with high-quality film waterproofing, on which the final floor is laid. Here's how to insulate the bath from the inside, keeping it warm and not sacrificing your health!
We tidy the walls
Laying mineral wool on a crate protected by roll waterproofing and protected from moisture by lining can be considered a traditional interior decoration. This process, although reliable, but very laborious. It is carried out in several stages.
As we already said, before insulating a brick bath from the inside, you need to make a crate on which mineral wool will be fixed. Having laid it, it must be carefully closed with a waterproofing material. To do this, you can use not only special industrial materials, but also high-quality plastic film of sufficient thickness and strength. In any case, the insulation is overlapped. For fastening, they use thin rails and a construction stapler or simply brew them.
It must be said that new technologies can significantly simplify the life of those who conduct bathhouse insulation. The fact is that many modern heaters perfectly combine the qualities of not only a heat-insulating material, but also waterproofing.
So you found out how to properly insulate the bath from the inside!