Before choosing a solid fuel boiler, it should be noted that not all models are suitable for specific conditions. It is important to pay attention to the type of fuel loading, as well as the power of the device. If the boiler room is located inside the house, then the top load may create some inconvenience during the operation of the unit. When the heater door is opened, smoke will enter the room. If you still decide to purchase such a device, then it is best to place it in a separate boiler room.
But the above characteristics are not the only things to pay attention to. It is necessary to choose heating equipment for a combination of many factors. Proterm Beaver boilers, which will be discussed below, are an excellent example for consideration.
Reviews on the main features of the solid fuel boiler brand 20DLO
You can buy this unit for 61500 rubles. It is an equipment for heating rooms for various purposes. Coal and firewood can be used as fuel, which, according to consumers, is very convenient.
After reviewing the reviews about “Proterm Beaver 20”, you will be able to understand that you can use 18 cm logs with this unit. A cast-iron heat exchanger increases the efficiency and reliability of the installation, as well as increases its service life. Customers love the fact that the manufacturer provides the opportunity to replace the medium cast iron heat exchanger sections. To protect against coolant overheating, the design provides for the presence of a cooling circuit.
Reviews on the technical specifications of the model
Power "Proterm Beaver 20DLO" is 19 kW. Coal combustion time reaches 4 hours. Before purchasing a model, you should pay attention to its dimensions, they are 935x440x440 mm. The volume of replaced water is quite large and amounts to 19.9 liters.
According to buyers, the equipment weighs a lot. Weight reaches 230 kg. Operating pressure may be equal to a limit of 0.8 to 4 bar. When connecting you will need the diameter of the chimney, it is equivalent to 130 mm. Buyers emphasize that firewood will burn out faster than coal. It will take 2 hours.
Reviews about the positive features of the model
Before making a purchase, you should definitely read the reviews about the Proterm Beaver boiler. The 20DLO is no exception. According to customers, she:
- reliable;
- convenient in operation;
- has an open combustion chamber and high efficiency;
- provides the ability to replace medium cast-iron sections.
As for reliability, it is provided by a manometer, with the help of which the operator has the opportunity to control the pressure for safe operation. Ease of use is guaranteed by the fact that the solid fuel boiler does not need to be connected to the mains, which is liked by consumers who live outside the city. Proterm Beaver equipment is supplied pre-assembled, so you don’t have to worry about connecting the elements yourself. Installing the equipment is very simple, as well as taking care of it and also maintaining it.
Reviews about the boiler brand 60DLO
An alternative solution is the 60DLO model, which consumers consider equipment with high heating power. The last parameters reaches 48 kW. The device is used in closed heating systems. The combustion chamber has an increased volume, which, according to customers, allows you to extend the operating time of the heating system.
The design provides for a thermomechanical power regulator, which is required to adjust the heating temperature. Functioning requires the use of solid fuels, it can be wood or coal. To maintain a certain heating temperature, the manufacturer installed a thermal relay.
Customers like that the coolant overheating is excluded due to the presence of a cooling circuit in the design. If you wish, you can separately order a boiler, which is used to prepare hot water.
Reviews on the technical specifications of the model
Having examined the Proterm Beaver boiler model described above in more detail, you will be able to understand that the time of combustion of coal and firewood remains the same. Overall dimensions of the installation are limited by the following parameters: 935x440x1240 mm. The maximum log length, according to customers, is quite large and amounts to 680 mm.
The cross section of the workpiece reaches 180 mm. The device weighs, as consumers emphasize, quite a lot, the mass is equivalent to 455 kg. The volume of enclosed water is 39.8 liters. This solid fuel boiler has a 150 mm chimney.
Positive feedback
"Proterm Beaver 60DLO" is popular among consumers for the reason that it has many positive features, namely:
- reliability;
- quality work;
- open combustion chamber;
- delivery of the boiler assembled;
- Warranty from the factory for 2 years.
Reliability is provided by a manometer, with which you can monitor the pressure inside the device. High-quality work, according to users, is ensured by a mechanized process of functioning. The boiler operates with high efficiency. The coefficient of its efficiency exceeds 90%.
By supplying and adjusting the air you can control the power of the boiler. Maintenance of equipment is very simple, maintenance is also not accompanied by difficulties, as is installation.
Reviews about the brand 40DLO boiler
This solid fuel boiler, according to customers, is specially designed for rooms whose area does not matter. The same coal and wood can act as fuel. As an alternative, you can use other types of solid fuels.
The kit provides everything you need to connect to the system. The equipment is made of ductile iron, which is resistant to elevated temperatures. Reviews about the “Proterm Beaver” indicate that the internal design has 6 sections and a spacious fuel compartment.
The device is equipped with a thermal relay, with the help of which the equipment maintains a constant temperature and protects against overheating. Customers like that the described model is very reliable and guarantees high-quality work. The first feature is expressed in the presence of a pressure gauge, while the quality work is indicated by the absence of the need to connect to the mains.
Considering the hydraulic system, you can understand that it provides for a two-way cast-iron heat exchanger. Hot water can be prepared in a storage boiler. It can be ordered separately if necessary. The described solid fuel boiler "Proterm Beaver" has a cooling circuit, which is responsible for overheating of the coolant above 110 ° C.