Conner products have long been known on the market for a long time; the radiator of this brand can be bimetallic, cast-iron or aluminum. These products are united by guaranteed European quality, although these devices are produced in China.
The main types of Conner brand radiators: cast iron batteries
"Conner" is a radiator, which is sold by cast-iron products. They are intended for systems with natural or forced circulation of water. This heating equipment breaks past stereotypes, as it has high quality workmanship.
These devices meet aesthetic and technical requirements, so they could become a highly effective addition to heating systems. It should be noted and affordable cost, as well as durability, corrosion resistance and immunity to any type of coolant. This also applies to water quality. "Conner" is a cast-iron radiator that is ready to last up to 50 years. It can be used in high-rise buildings, and more specifically in heating systems that operate under high pressure. Due to the fact that the devices have low hydraulic resistance, they can be used in systems with natural circulation. Such products become even more versatile due to the different diameters of the inlet pipes. Accessories are supplied with the device, which is certified and fully complies with state standards.
Characteristics of Conner brand aluminum radiators
If Conner cast-iron radiators are not suitable for you, you can consider aluminum, which, according to users, are durable, lightweight and have an incomparable design. Devices have high execution elegance, and work quite efficiently, with increased heat dissipation. Consumers also note the high reliability of these batteries.
Conner cast-iron radiators may seem quite expensive to some consumers. But aluminum models have an acceptable cost, and they can be performed by casting technology or by extrusion. The depth of these devices can be 70 and 100 mm. The round cross-section of the collector, the use of composite glue, the installation of joints by laser welding allow radiators to undergo high pressure. If we are talking about cast aluminum radiators, then their depth can vary from 80 to 100 mm. The average value is 85 mm. The center distance is 500 mm.
Reviews about aluminum models
"Conner" is a radiator, which is also offered by the manufacturer in the form of aluminum devices. Consumers especially emphasize that when buying these devices it is necessary to pay special attention to the fact that the product is not defective. This is due to the fact that some buyers are faced with such problems. Well, if there is an opportunity to exchange the device. After 3 years, these units in some apartments leak, but at the same time you can use the service support under warranty.
If Konner radiators will be installed within the same room, then you should consider them whether their shades and appearance match. In some cases, the models are different from each other, despite the fact that the boxes are exactly the same.
Konner Bimetal Radiator Reviews
Konner bimetal radiators are the most innovative developments in this area. They are made taking into account operating conditions in Russia. The design is very durable, which is ensured by the presence of an internal collector. According to customers, it is made of high alloy steel, which makes the nodes corrosion resistant. This feature eliminates the contact of the coolant and water, which is why bimetallic devices are able to work together with any coolant. As buyers emphasize, it does not matter what the acid-base balance is.
In the manufacturing process, these devices are tested, and at the final stage are covered with epoxy enamel. Users really like this, since this approach allows preserving the primary properties and the surface does not violate the integrity during the entire service life, while it remains resistant to ultraviolet radiation.
Negative reviews of cast iron radiators of the brand Konner
Conner heating radiators, as mentioned above, can be bimetallic, aluminum or cast iron. The latter will be discussed in this section. Some consumers claim that this acquisition cannot be called profitable, since quality makes itself felt in the process of operation. Externally, such batteries look aesthetically attractive, they look stylish, the heat dissipation, according to the supplier, is magnificent and reaches a value of 150 W from each section.
Consumers claim that the installation in any case is successful, without difficulty and fast enough. But after starting the heating, the most unpleasant thing begins. It’s cold in the rooms, the declared indicators turn out to be just an advertising move. The temperature does not rise above 23 ° C. Some, choosing cast-iron heating radiators, the price of which will be mentioned below, after replacing them with traditional aluminum. From this it should be concluded that it is necessary to familiarize yourself more closely with the qualitative characteristics of these devices before purchasing, as well as correctly calculate the heat capacity.
Cost
If you decide to purchase Konner cast-iron radiators, then you should pay attention to the cost of one section, which is limited to 430 rubles. In this case, we are talking about the device "Modern 500", the heat capacity of which is 150 watts from one section. If you prefer 4 sections, the power will be 600 watts, and the cost will increase to 1720 rubles. Cast-iron heating radiators, the price of which reaches 6450 rubles, can have a heat capacity of 2250 watts. Moreover, the number of sections is 15. It is worth noting that this equipment is manufactured by injection molding, which is most often preferred by modern consumers.
If you do not need such heat capacity, then you can choose a device, one section of which produces 120 watts. Thus, the Modern 300 model will have to pay 420 rubles, whereas if the heat capacity is increased to 1800 W and the number of sections is up to 15, the cost is already 6300 rubles.
Conclusion
From the reviews you can understand that these products have many advantages. Among them, it is necessary to highlight the resistance to hydraulic shocks in the system, impressive heat transfer, absolute environmental friendliness and safety, as well as an attractive appearance.