Whatever material you use in the process of building a house, you won’t be able to avoid insulation. However, every modern consumer tries to simplify and reduce the cost of work as much as possible by finding a favorable market offer and carrying out the work independently.
You can cope with this task if you choose the right insulation. One of the popular materials for thermal insulation is Izolon. With it, you can solve several problems at once. After all, it is good when the insulation works allow you to form a soundproof barrier. This is especially true for houses that are built within the city, especially near busy roads.
What is Isolon insulation
If you also wondered about what Isolon is, then you should familiarize yourself with it more closely. For its manufacture, polyethylene foam is used as the basis. This raw material is processed, as a result it is possible to achieve a fine-meshed structure. On sale there are special series of the described insulation, in which the outer surface is represented by a foil layer. Due to this, it is possible to achieve high performance characteristics, as well as the resistance of materials to moisture and ultraviolet radiation.
With regard to security, various modifications of thermal insulation are available in the CIS. Finished products comply with international standards. If you have a question about what Isolon is, then you should consider the main varieties of this material. It can be unstitched and stitched.
Classification is also carried out according to the structure of the canvas. You should pay attention to the line of insulation, reinforced in some respects. For example, thermal insulation can have increased wettability, which allows it to be treated with adhesive solutions and paints. Other varieties of Isolon have increased stiffness or flame retardants in the composition. The latter have reduced flammability.
Specifications
When answering the question about what Isolon is, it is worth considering its technical characteristics. Among others, the density should be distinguished, it varies from 26 to 45 kg / m 3 . Water absorption does not exceed 0.1%. The effect of reflection of the radiation energy of the foil type of insulation is 97%.
Specialists usually pay particular attention to compressive strength, for the described material, this parameter varies from 0.035 to 0.33 MPa. Thermal insulation can be used at a wide temperature range - from -60 to +125 ° C. Elongation can reach 250%. The maximum elasticity for Izolon is 130%.
The specific heat capacity reaches 1.95 kJ / kg * s. According to state standards 30244 Izolon, depending on the variety, can belong to the following combustibility classes: G2-G4. Among the main characteristics is the ability to reduce impact noise. This characteristic is at the level of 20 dB. When buying material, you should also pay attention to vapor permeability, it is equal to 0.001 mg / mchPa.
Additional characteristics: sizes
If you want to find the answer to the question of what Isolon is, then this material should also be considered in terms of parameters. The dimensional grid of this thermal insulation is wide enough. In the market you can find rolled material, the thickness of which varies from 1 to 50 mm.
As for the length, it can reach a maximum of 200 m, while a minimum of 2 m. The width of the sheets varies from 0.55 to 2 m. As for the plates, their sizes can be 1x1.1 and 2x1.4 m .
Mounting Features
The characteristics of Isolon are not all that the consumer should be familiar with. It is also important to know about the features of installation. There should not be any difficulties in the installation process, this applies even to the case when there are no professional skills. Installation rules come down to a simple algorithm. At the first stage, it is necessary to choose a material of suitable thickness. This takes into account the material in the base of the insulated surface, as well as the features of the configuration of the base.
Isolon insulation may include cutting elements of suitable shape and size. These work are very convenient to carry out with a sharp knife. When laying a self-adhesive type of thermal insulation, remove the protective film and arrange the insulation parts in the correct order. They should be pressed to the surface.
If you have non -self-adhesive insulation available, then for its fastening you should use adhesive solutions or compositions based on acrylic. All joints of the plates must be fastened with mounting tape, welded or connected using the staples of a building stapler.
Additional recommendations for laying Izolon
You can buy Isolon 10 mm for 230 rubles. per square meter. However, cost is not the only thing a consumer should know when purchasing the described material. It is important to get acquainted more closely with the installation features. For example, Izolon requires a ventilation layer that forms near the walls. By excluding this step, you may run into the problem of destruction of the protected materials.
During installation, you should abandon the usual adhesive tape, as it will require complete sealing. To form an integral coating without cold bridges, it is recommended to stock up on special tape. Self-adhesive PES, which is known as IzolonTape, has characteristics similar to the main material. Among others, plasticity, high elasticity and strength should be highlighted. Due to the applied adhesive layer, the material is easy to lay.
Areas of use for the self-adhesive varieties of Isolon
Isolon insulation is a composite of foamed polyethylene or NPE. The material may have a self-adhesive and reflective layer. It is used for insulation and soundproofing, as well as soundproofing. Self-adhesive Izolon has outstanding technical characteristics and operational features, which allows it to compete with traditional materials in quality and cost.
This kind of material is very convenient for installation. It allows you to save time and time of putting the building into operation. Foil insulation together with the necessary accessories allows you to create a universal insulation system that solves the problems of capital and housing construction.
More about areas of use
The self-adhesive foil "Isolon" is also called "Folgoizolon". He found his wide distribution in:
- construction;
- mechanical engineering;
- when packing;
- in leather goods industry;
- automotive industry;
- Food Industry;
- medicine;
- in the field of tourism, recreation and sports.
Insulator "Izolon" has not only increased noise and heat insulation properties, but also perfectly protects against steam and moisture, has the properties of elasticity and softness. Its weight is negligible. It is characterized by chemical and microbiological resistance, environmental and hygienic safety, as well as durability.
Conclusion
Polyethylene foam is environmentally friendly and safe. Sometimes we allow his contact with the skin and food. Some varieties of Isolon may have a specific smell, but it quickly disappears and is due to the technical manufacturing process. This insulation is very common today, it owes this to ease of installation and low cost.