“Neomid 440” is known to consumers today as a means for external use, which is intended to protect wood of different species from decay, damage by wood-painting fungi, as well as various kinds of harmful effects. If the surface is coated with this composition, then it will not be invaded by wood-bore insects, and mosses, algae and lichens will not form on the base. Moreover, the action of the composition lasts up to 20 years or more, if you close the surface with a film-forming agent. Use this mixture as a protective impregnation for the treatment of:
- wooden beams;
- bearing beams;
- walls;
- window and door blocks;
- overlappings;
- lag;
- rafter systems;
- fences.
Positive reviews
"Neomid 440" is known to consumers in the form of a composition that is able to prevent wood damage. According to customers, with the help of this mixture it is possible to stop the already begun processes of destruction by biological agents. The mixture reduces the degree of cracking of the ends of sawmill materials, ensuring uniformity of shrinkage of buildings. Users also emphasize that this composition can be used as a primer antiseptic for the further application of paints and varnishes. The mixture is not able to change the structure of wood, among other things, it does not interfere with processing, painting and gluing.
Application Reviews
"Neomid 440" has a fairly wide area of use. Consumers in their reviews claim that it can be used as a protective impregnation for surface treatment inside and out. According to users, the composition works well on wood structures for various purposes.
Instructions for use: surface preparation
Before Neomid 440 is applied, it is necessary to prepare the surface, protecting it in areas where the composition should not be applied. The surface is cleaned of tar, old paint, dirt and dust before using the product. If the surface is already affected and has acquired a bluish tint, then at the first stage you should use bleach, they may be the composition of the same manufacturer. With it, you can disinfect the surface and give the wood a natural shade. Work must be carried out under special conditions, which are expressed in a limited ambient temperature. Do not start work if the thermometer has dropped below +5 ° C.
Solution preparation
The antiseptic Neomid 440 is on sale in the form of a concentrated solution, before using it, the mixture must be shaken, and then diluted with water in a ratio of 1 to 19. During the dilution, you should get an emulsion that has the color of coffee with milk. The concentration can be increased to 1:15, this is permissible when the storage of wood before or after processing will be carried out at a relative humidity in excess of 80%.
Solution flow rate and method of use
"Neomid 440", the instructions for use of which will allow you to avoid mistakes, will be consumed in the amount of 100 to 200 grams per square meter. There are two ways to process wood. The first involves the use of a roller or brush, as well as a spray device, while the second involves immersion of the material in the emulsion.
In the first case, the application of the mixture to the surface should be as uniform as possible. If a brush is used, then it should have a synthetic pile. If you decide to apply immersion technology, you can use a stainless steel or plastic container. The time during which the material must be kept in the emulsion should not be less than 2 minutes.
"Neomid 440", reviews of which are only the most positive, can be applied by immersion of elements in an emulsion. This method is most effective in an industrial environment, when there is a need to disinfect a large amount of lumber.
Work should be carried out in intensely ventilated areas or in the open air. After processing the wood, it should be protected from water and precipitation, these conditions must be observed throughout the drying phase. The first day the processed products should be stored at a temperature in the range from 16 to 20 ° C, while the relative humidity should be within 60%.
For reference
If you decide to use Neomid 440 in your work, reviews of which you could read above, then you should know that after application the composition can change the tone of the wood, this is due to the species and variety. Do not be afraid, because within two weeks the natural shade will return to the material.
What else you need to know about the antiseptics of the brand "Neomid 440"
Emulsion consumption can vary depending on the characteristics of the wood, its maximum value is 350 grams per square meter. Judging by the reviews, it is necessary to apply the composition in larger quantities to the wood that will be stored in conditions characterized by high humidity. You can use the mixture not only outside, but also indoors.
People who used this tool write in reviews that the final shade of wood remains pristine. The term of protection can reach 25 years. It is necessary to store "Neomid 440" at a temperature in the range from +5 to +30 ° . The mixture withstands 5 cycles of freezing and thawing. The concentrate can be stored for 12 months, but the diluted ready-made solution - 14 days. Describing the antiseptic Neomid 440, consumer reviews also indicate the environmental safety of the product. Its application is carried out in several layers, their number can vary from 2 to 3. You can purchase products in plastic canisters with a volume of 1 to 30 liters. As an intermediate value of the volume, 5 l packaging is offered.
Conclusion
Customer reviews are advised to remember that in the manufacture of the Neomid 440 working solution, the master should use personal protective equipment, namely gloves, glasses, and protective clothing. If the mixture gets on your skin or eyes, wash them with plenty of running water. If required, consult a doctor. The composition of the product contains water, technological additives and a synergistic mixture of biocides.