Cooler is a very useful device, used not only in office premises, but also in many private houses and apartments. However, in order for this tool to deliver truly clean water, it is necessary to regularly clean it. According to experts, cleaning a water cooler should occur at least once every 3 months. And it’s not necessary to call specialists for this, you can do everything yourself.
Order and algorithm of actions
Cleaning the water cooler begins by disconnecting the device from the power supply network. Then it is installed on a special waterproof mat, after which you need to remove the bottle from it and drain the old water. Follow the procedure: first, the liquid is drained from a hot tap, and then from a cold one. At the next stage, cleaning the water cooler is accompanied by dilution of the drained water with the help of a special disinfectant "BIOR 1". Dosage - approximately 25 milliliters per 1 liter of water. Next, you need to use a special Kremklin detergent for those parts that are in the drip tray.
After our so-called “repair” of water coolers is done by removing the bottle holder (must be removed with the needle) and disinfecting the bottom and walls of the tank. For this, it is not necessary to use any potent or specialized means. Simply wipe the inside of the container with a lint - free cloth. But in the cooling tank, just the opposite - for disinfection, you need to use the prepared solution. We fill it in there and give the opportunity to drain some of the hot and cold water from the taps. This is necessary so that the streams are filled with the right amount of disinfectant solution.
Now the water cooler will be cleaned with brushes and brushes. They need to process the inside of the holder of the plastic container, the separator, waterways and the cooling tank. After that, the holder is processed again (but this time with a napkin) and put back into place. The special Kremklin detergent should also be used to clean the cooler body. Remember to process the back of the device and the grill. Now open the hot and cold faucet and wait until the detergent flows out of each in turn. If possible, also clean the taps. It is recommended to do this with the Antiklin spray. Clean the gutters of the taps and the front panel with a brush.
The final stage
After that, install the taps in place, put the cleaned bottle in and fill the device with clean water.
Everything, at this stage, the cleaning of the water cooler has been successfully completed. Do not forget to connect the device back to the 220V network. Now for the next 3 months you can enjoy clean drinking water from your water distributor.
How much does a professional cleaning cooler for water cost?
The price of such services in Russia is about 900-1200 rubles, so if you have a desire to save the extra "tyshenka", feel free to use this instruction!