How to iron pants with arrows?

What distinguishes a married man from an unmarried man? Or economic from not very? Trousers! Or rather, the presence of arrows on them. Some styles, models of trousers look obscene without perfectly sharp arrows. We will tell in this article how to iron pants with arrows. Not everyone can make perfectly straight arrows, as in a store, so if you have classic trousers in your wardrobe, the following recommendations will come in handy.

How to iron pants with arrows?

Highlights:

1. Not every iron can iron trousers so that the arrow remains for a long time. Therefore, it is necessary to choose it correctly. You can buy the most ordinary iron, but the most important thing is the steam function. Without steaming, cope with the question: "How to iron men's trousers with arrows?" will not work.
2. A spray bottle or sprayer with water is also needed. Although in stores now rarely see an iron without an already built-in atomizer. So check if you have one or not. If not, you can find it at any hardware store or large supermarket.
3. Ironing board. If it’s not there, a regular table will do. Just cover it with some thick cloth or blanket and make sure that it does not slide on the table, otherwise the arrows will be “sliding”.
4. A cotton tablecloth or gauze moistened with water. So you can definitely cope with the question: "How to iron trousers with arrows?"

Training

So, the equipment is ready, the trousers are already on the ironing board. Now let's figure out how to iron trousers.

It is necessary to carry out preparatory actions:

1. Turn trousers inside out.
2. Iron all seams, pockets and lining.

Before you start ironing, be sure to look at information about the temperature conditions under which you can iron the fabric. Otherwise, you will not figure out how to iron trousers. This rule should not be neglected. The temperature of the iron should be low, since it is necessary to iron the woolen trousers, observing this condition.

How to lay out trousers for ironing?

Lay them out on the board so that all the seams coincide with each other, especially the two inner side seams, and the front side seam should coincide with the inside. Pants should be without bumps, if they are, remove them with your hands; they must lie exactly on top of each other so that in the end the arrows are symmetrical.

Main stage

1. If you immediately iron the upper leg, then all the internal seams will appear on it. Place a towel inside to avoid this.
2. We make arrows on the front side of the trousers, and not on the wrong side.
3. The iron quickly dries gauze or other cotton cloth, so prepare a spray gun or spray gun in advance that you will moisten the cloth with. Of course, you can do this under the tap.
4. Pay attention to this detail: the surface of the iron must be clean, otherwise you will have to spend time already getting rid of stains on trousers.
5. To keep the arrows longer, prepare a bar of soap: rub the remnants of the arrow on the wrong side of the trousers, this will strengthen them.

So, how is the ironing process going?

1. Check once again that the trousers are lying correctly.
2. Put a towel in the upper leg so that the inner seams are not imprinted.
3. Cover the leg with a damp cloth or gauze.
4. We start ironing: at first iron simply as a normal thing - eliminate wrinkles, irregularities. Important: start ironing trousers from above. And do not forget to turn on the steaming mode.
5. Turn the trousers over to the other side, face up. Repeat steps 2-4.
6. Now fold the trouser leg to the side: in front of you is the inside of the trousers. Iron it, not forgetting the wet gauze.
7. Turn over the trousers again: now in front of you is the inside of the second leg. Iron as well as the other inside.

The final stage: arrows

1. Fold out the trousers as they were folded at the beginning of ironing.
2. Check again that the legs are parallel to each other.
3. Cover them with wet gauze.
4. Start ironing the arrows. Please note: we do not “carry” the iron, but rearrange it so that the seams do not move out and new folds form.
5. Do not forget to use soap to fix the result.

There are a few more tricks

We list them:

1. If you are not sure that during ironing the arrows will remain in place, you can fasten the pants with paper clips.
2. You can add ammonia or vinegar to the spray bottle to wet the gauze. This will help to fix the arrows and prevent their deformation during wear. Moreover, vinegar will protect against the appearance of greasy, greasy spots.
3. Earlier it was said that soap helps to fix the arrows. This is a fact, but there is one “but”: the soap should be without any additives.
4. You cannot immediately hang trousers in the closet or put them on after ironing. Let the product dry, and only then do whatever you want with it. Optimum drying time: five to ten minutes.
5. In order not to iron the arrows too often, constantly monitor the condition of the trousers: after wearing, clean from dust and hang in the closet.
6. To trouser less wrinkled, and the arrows held for a long time, they need to be hung on the shoulders so that in the closet they hung in full length and did not fold.
7. Start ironing the arrows from the knees - this is the most “unstable” area: make arrows here, easily do on other areas.
8. There are styles of trousers with tuck-tucks. It may seem that such arrows cannot be ironed. But the eyes are afraid, the hands are doing: iron first the right front tuck, and then the left front and so on.

Conclusion

At first, this business will be difficult, but in fact, it is very simple, the main thing is experience. If you “fill” your hand, then soon the arrows for you will cease to be a problem, but will become just a matter of five minutes.

We hope the article was interesting to you. Read the instructions carefully and do not forget the necessary equipment. Everything on the list should come in handy.

And remember: the arrows will definitely add elegance to your appearance. After all, a married man is not very distinguished from unmarried or economic from trousers.