The submersible pump "Gileks Vodomet" is a multi-stage device for water purification with floating impellers, a built-in capacitor and an electric motor washed by it. This type of equipment is designed to pump water from wells with a minimum internal diameter of 100 millimeters. You can use the device to supply water from tanks, open reservoirs, as well as wells, which is very convenient for solving everyday problems. You can use the equipment for irrigation of the garden and the garden, as well as arranging the water supply system in a country house or cottage in the city.
Positive feedback on submersible pumps versus vibratory and vortex pumps
If you are interested in Jilex Vodomet pumps, reviews of which you can read in the article, you should compare their characteristics with other varieties of similar devices. Experienced consumers have already managed to do this, considering the features of submersible pumps of the described brand with vibration equipment. According to customers, in the first case, you can count on a higher coefficient of performance, this is due to the fact that rotational movements are more economical than reciprocating.
The manufacturer managed to achieve this effect due to the lack of start-up mode. The well pump "Dzhileks Vodomet" is also chosen by consumers for the reason that it creates not so much noise compared to vibratory varieties. In addition, you can count on a longer service life, as there is no piston system valve that wears out and malfunctions inside.
Use Safety Reviews
Owners of suburban homes claim that the submersible pumps of the Gileks company during operation do not have a harmful effect on the well and the water supply system, since their operation is not accompanied by vibrations. You can count on complete noiselessness, which is one of the important features of this equipment, so the house will not be filled with extraneous sounds during the operation of the pump.
Reviews of borehole pumps "Vodomet" in comparison with vortex
The well pump "Dzhileks Vodomet", reviews of which will allow you to understand which model is best to buy, is often compared by consumers with vortex units. The first type of equipment works with higher efficiency, among other things, it does not undergo a change in parameters over time, but vortex pumps during operation encounter the problem of wear on working surfaces. This circumstance is able to reduce the flow rate for the pressure characteristic.
As buyers emphasize, borehole pumps are not very sensitive to contamination, which cannot be said for vortex equipment.
Reviews on the pump "Vodomet" in comparison with traditional installations
"Dzhileks Vodomet" incorporates floating impellers, knowing this feature, consumers make comparisons with traditional installations for pumping water. In the case of Gileks, you can count on greater hydraulic efficiency, which is due to the independent exposure of zero clearances by equipment. As a result of this, the installation increases the pressure characteristic of the impellers individually, which reduces the need to use these elements in large quantities. In the light of this circumstance, it can be argued that the axial dimensions of the equipment are reduced, the rotating parts are not so impressive in the mass, therefore, the vibration becomes not so intense.
Clog Resistance Reviews
More and more often recently, users have chosen Jilex Vodomet for the reason that these plants are not as prone to clogging as traditional equipment. This quality is explained by the ability to pass particles of large size. If you choose a pumping system for operation in domestic conditions, then Vodomet will be the optimal solution, as it ensures continuous operation.
Reviews of pumps "Vometomet" with a washed engine
On sale you can find the "Dzhileks Vodomet", which is installed on a washable electric motor. Users believe that this offers many advantages over unconventional units. First of all, in this case, it is necessary to highlight the location of the motor above the pump part, this allows you to remove the electric cable from the top cover of the equipment, which reduces the size and allows installation in a well with a casing pipe of not such an impressive diameter. Subject to these conditions, the cost of work.
"Gileks Vodomet" has a motor that is reliably protected from overheating, this is ensured by the flow of washing water. The fluid passes between the housing and the stator shell, overcoming the annular gap. At the top of the hydraulic element there is a seal that protects the pump from sand. Users like this feature, as the life of the equipment increases.
The units have such an arrangement that allows the pump to be used in a partially submerged position, this may be necessary in shallow reservoirs. Home craftsmen independently perform installation works, which are simplified thanks to the built-in capacitor that excludes the box. As a result, it became possible to use a three-core cable, replacing it with a four-core cable.
Using Extra Protection
An additional advantage is the use of the mesh filter with square meshes of 1.5 mm. This site prevents the penetration of long particles, which would be able to cause clogging. Consumers who monitor the health of their loved ones choose this equipment for the reason that all parts of the pump that will come in contact with the pumped water are made from materials approved for interaction with food products.
Characteristics of the well pump "Vodomet" of the Prof "55/35" brand
Well pumps "Dzhileks Vodomet" have outstanding characteristics, as they are versatile. The above model can be used in conditions not only of wells, but also of wells. The owner of the equipment will be able to pump out water from reservoirs and irrigation tanks. Inside the case, an electric motor is installed, the power of which is 470 watts. You can count on a performance of 55 liters per minute. During pumping, the water should not be contaminated more than the scale specified by the device manufacturer. The maximum volume of passing particles should not be more than 300 grams per cubic meter. The equipment is capable of providing a pressure equal to 32 meters. In the process of use, it is important to consider that the instructions provide for the number of restrictions on turning the device off and on, it should not be more than 20 times per hour.