Recently, wood and plastic have been used as decorative materials. In the first case, this is due to the decorative properties, due to which the building acquires an elegant and unique appearance. Among other things, a wooden product is durable and reliable, and it also allows walls to breathe without emitting toxic substances. One of the most popular modern materials for interior and exterior decoration is a block house, the imitation of the log in its performance looks presentable. Boards are products whose front side is convex and the back is flat. For reliable fixation and ease of installation on the sides there are docking elements: grooves and spikes.
The benefits of a block house made of wood
Wooden imitation of logs has certain advantages over other materials, among them low cost, excellent performance, ease of installation, and environmental friendliness can be distinguished. Low price is associated with the features of the process. During manufacture, the log is sawn, and its internal part is removed and goes to the production of timber. The external component is used to make a block house. Thanks to this, manufacturers are able to achieve waste-free production, which has a beneficial effect on the cost of the material.
Imitation of a log from wood possesses excellent operational properties. The material does not crack, does not undergo deformation and has good thermal insulation properties. Under the influence of external factors, it does not change the initial linear dimensions and perfectly tolerates the effects of precipitation, as well as sunlight. Despite the fact that wood is a fire hazardous material, in the manufacturing process imitation of the log is processed with special compounds and impregnations that can provide fire resistance to the finish.
As practice shows, installing such a cladding is quite simple, for this you do not have to turn to specialists for help, which allows you to reduce the cost of work. For home owners who care about the health of loved ones, imitation of logs made of wood is excellent, since only natural materials are used in the manufacture. During operation, the material will produce volatile, which contribute to improving human health. If coniferous wood is the basis, then the release of resins increases the waterproofing properties of the products.
Block House Dimensions
The dimensions of the material will depend on the dimensions of the log, which formed the basis. The length can be equal to the limit of 2 to 6 meters. As for the thickness, it varies from 2 to 4 centimeters. Width can be different: 14, 17, 19 or 20 centimeters.
The main disadvantages of a wooden block house
Despite the fact that imitation of the bar has many advantages, it also has some disadvantages, namely the tendency to scratch. This indicates that transportation as well as loading and unloading may be problematic. This also applies to operation, because the surface will have to be used as carefully as possible. Among the minuses, one can distinguish a tendency to darkening and pollution. The products must be looked after, and treated as necessary with paints and varnishes or other protective agents.
Installation of a block house
Quite often, home masters independently finish, the imitation of the log is installed on the crate, and the elements themselves are fastened together using a lock connection. It is important to wait until the material dries, using wet panels is unacceptable. Drying the tree will give a natural shrinkage, therefore, when lining with wet material, cracks and gaps may appear during operation.
Initially, it will be necessary to install a crate, which is made of bars of a small cross section. This allows you to make the surface as flat as possible. Laying can be done vertically or horizontally, everything will depend on the preferences of the owner of the house. It is necessary to install products by turning them upside down. This technology eliminates the accumulation of moisture in the grooves, which can lead to rotting of the material and the further spread of the fungus. Quite often, such work is carried out in parallel with the installation of hydro-, heat- and soundproof materials. They are located in the space that is formed between the cladding panels and the crate. In addition to the castle connection, the products are additionally fixed to the crate. The method will depend on the thickness of the material. Thus, wide products are fixed with self-tapping screws, while thinner ones are fixed with brackets coated with zinc, which eliminates corrosion.
Characteristics of a Vinyl Block House
Vinyl siding - imitation of logs - allows you to create a facade in the image of a chopped log house. In this case, the walls will be protected from atmospheric precipitation. If you decide to choose this finish, then you should familiarize yourself with its features. Vinyl panels do an excellent job with mechanical stress, do not rot and do not ignite. You can use such a cladding in the operating range, which varies from -50 to +60 degrees. By choosing this inexpensive material, you can create a facade that will completely imitate the color and texture of natural wood. During operation, the material will stably cope with exposure to solar radiation, while the surface will not burn out. Masters note that the panels are easy to install, unlike a wooden block house, do not need additional care.
Installation of vinyl siding
Imitation of a bar for the facade today is presented for sale not only in the form of wood, but also vinyl panels, they are installed according to the principle of a conventional block house. However, it is necessary to observe certain rules that are dictated by the properties of the material. Installation of products should be carried out in such a way that nothing prevents the compression and expansion of the material, this will occur with temperature fluctuations. Fasteners must be anticorrosive, anodized or galvanized. It can be self-tapping screws or nails of sufficient length.
When fixing, leave a temperature gap. If in the process of work you decide to use self-tapping screws, then after twisting they should be turned one turn. When installing siding (imitation logs) using nails, a gap of 1 millimeter should be left between the hat and the surface.
Tips from a specialist
Vinyl siding panels are installed according to certain rules, they provide for the installation of fasteners in the designated perforation places. If such holes are absent, they are pre-punched. Fasteners should be perpendicular to the skin. Between the attachment points there should be a distance that does not exceed 40 centimeters.
Conclusion
After installing the battens , steam, heat and wind protection are installed. The siding elements themselves are installed, moving from bottom to top.