Finishing window slopes inside with plastic, drywall, do-it-yourself lining. Finishing window slopes inside a wooden house (photo)

Modern glazing requires attention to every detail, including the design of window sills and slopes. Finishing of window slopes inside must be done, otherwise cold air will penetrate into the room, and mold will appear on the glass panes themselves. What materials to use for decoration and what are the features of each of them? Let's try to figure it out.

The main thing is to finish!

window sill decoration

Finishing slopes should not be postponed for a long time, as this has a negative effect on the structure. Consider why they are needed:

    1. To ensure tightness. When finishing window slopes inside and outside, the foam is used, which eventually becomes unusable due to external factors. As a result, water gets into the seams of the joints, they lose their thermal insulation properties.
    2. Finishing allows you to add aesthetics to the structures, as the windows become neat, beautiful.
    3. Due to the heat-insulating properties of the slopes, condensate will not accumulate on the surface of the glass packet.

Most experts say that finishing is best done on the basis of three materials - plastic panels, lining or moisture-proof drywall. Consider the features of each method in more detail.

Lining

Finishing window slopes inside the clapboard is especially often used in the construction of wooden houses, since in this case the overall harmony of the interior is ensured. For a log house, a lining is generally an excellent finishing material, which, in addition, is presented in a variety of color and size solutions. The advantages of finishing with such a material include:

  • environmental friendliness thanks to what lining can be used also for internal furnish ;
  • strength and durability;
  • the opportunity to create a harmonious interior.

According to the structure, lining is sheets of wood glued together, the surfaces of which are varnished. Finishing window slopes inside a wooden house on the basis of this material is an ideal solution, since the entire interior will be designed in a single style solution.

Lining installation

finishing window slopes inside the photo

To finish the slopes using lining, you will need a screwdriver, sealant, lining itself, screws and corners. This is not the most difficult job, so it is quite possible to cope with it on your own. The essence of the work is as follows:

  1. The lining is attached to the slope by wood screws. If the wall is uneven, you can first mount a crate on it.
  2. Using the outer and inner corners, you can carefully hide defects that may appear during decoration. In addition, the corners allow you to increase the tightness of the entire window.
  3. If the lining is mounted vertically, then installation from the frame begins.
  4. When using plastic lining, you need to set the starting strip, from which further finishing will be carried out.

We use drywall

finishing window slopes inside clapboard

Finishing window slopes inside with drywall is a popular solution, which is often used during repair work. The material attracts attention with the ease of installation and the creation of a perfectly smooth surface. It is best to use it when decorating window slopes on a balcony, which is glazed, since this material is not resistant to moisture. The essence of the work is as follows:

  1. Canvases are cut from plasterboard sheets, which should ideally fit under the window opening. Mounting can be done either on the basis of the crate, or without it. What to choose depends on how well the slopes are processed and what is the quality of the double-glazed window itself. Plasterboard sheets can also be attached to glue, but it is important that the walls are perfectly even.
  2. An l-shaped bar is attached to the window or frame profile, the task of which is to fix the drywall from the side of the double-glazed window.
  3. Plasterboard panels are attached to the bar. It should be remembered that all voids formed must be carefully treated with sealant so that cold bridges do not occur.

Plastic panels

plastic window slopes

The most common way is to trim the window slopes inside with plastic. In this case, the whole structure will look solid, and the PVC panels themselves can be chosen the most different in terms of size and technical characteristics. Before you start finishing, you need to prepare the surface of the slopes, and then cut out the plastic parts of the desired size. Wooden battens are mounted around the entire perimeter of the window , then a profile is mounted on which plastic panels will be mounted.

If it is necessary to insulate the windows, you can put a layer of mineral wool in the space between the wall and the panels or treat it with foam. To ensure the accuracy of the joints, it is important to treat them with silicone. Finishing plastic window slopes inside is a profitable solution, as this material has a smooth surface and is available in different colors, so you can choose a specific shade that will look harmonious in the interior. The attractiveness of this method is that both the window and the slope will have the same expansion coefficient, therefore, a tight fit to each other without the formation of cracks will be ensured. In addition, these works can be easily handled on their own, without the help of specialists.

Plastic benefits

finishing window slopes inside a wooden house

Most often, the decoration of window slopes inside the house is carried out precisely on the basis of plastic panels. Experts say that this material has a number of positive features:

  1. It is durable.
  2. It can be easily replaced in case of breakdowns or defects due to mechanical stress.
  3. It is environmentally friendly, so when located inside it will not have a negative impact on residents.

A variety of plastic panels is PVC lining. Finishing window slopes inside on the basis of this material is good in that it opens up great opportunities for creating a barrier between the street and the room. In addition, a high level of moisture resistance will be provided, which is also very important.

Plaster

In the old fashioned manner, many prefer to plaster the slopes first and then paint them. This is a traditional way that many people like. For decoration, you can use mixtures of cement, gypsum. Before work, they are diluted in the right proportion with water. Plastering begins with the fact that window openings are cleaned of dirt and foam. It is better to close the window itself with a film so as not to stain it during operation. Most often, a similar finishing of window slopes is done inside with their own hands, since there is nothing complicated in this process.

do-it-yourself window sill decoration

When using this material, beacons should be installed at a distance of 5 cm from the window. Lighthouses are fastened either with nails, or with special glue for plaster. The plaster layer should not be the thickest - a maximum of 2 cm, and the corners should be done with a slight slope. After locating the guides, you need to apply part of the mixture and evenly distribute it on the surface. After the layer has dried, the following is applied - as a rule, this is done after about 5 hours. Stucco finishing has two important features:

  1. Plaster is one of the cheapest materials.
  2. All work can be done with your own hands.

What to choose?

decoration of window slopes inside with drywall

As can be seen, window slopes can be finished on the basis of a wide variety of materials. The photo shows that each method allows a special way to equip the interior. Experts advise choosing specific materials based on several factors, and the most important one is the following: finishing materials should have low vapor permeability compared to polyurethane foam.

Before installing the slopes, it is very important to carefully prepare the foundation so that it is clean, strong, without any bumps. And remember: all the gaps must be sealed, since otherwise you cannot avoid getting cold air into the room and accumulating condensate, which will certainly lead to defects on the surface of the frame and slopes.

Source: https://habr.com/ru/post/F10496/


All Articles