Most often at furniture, joiner and procurement enterprises you can find circular, chain and band saws. Under production conditions, such an acquisition will be most preferable. Chainsaws are affordable, portable and can handle large diameter logs. However, they lose due to the large thickness of the cut, which exceeds 10 mm. There is one more minus in this case - low productivity, because manual labor cannot be excluded here.
How to make the right choice
Circular saws are more effective, however they cannot provide a cut less than 2 mm. Their work is accompanied by the production of large quantities of waste. Useful yield is only 55% versus 70, which tape devices can boast of. This can be very expensive if you have to process rare wood species. Among other things, circular saws provide for additional lapping and sharpening of the cutting tool.
Tape units turned out to be the undisputed leader for a reason. Among their advantages should be highlighted:
- performance;
- tool life;
- security.
Productivity is 30% higher compared to other equipment. Saw blades with good handling are dull and torn quite rarely, which cannot be said about discs and chains. Subsequent trimming and trimming is not required if the processing was carried out with a band saw. This saves not only time and effort, but also money. In the design of each saw, it has an asynchronous motor, which drives a belt drive. This system is quite old, but reliable and capable of ensuring the durability of the machine.
Additional benefits
The motor does not provide for maintenance and adjustment before operation. In addition, a band saw is a must for cutting curly cuts. Her canvas does not go from side to side, does not deviate, as is the case with nail files. It should also be noted safety. In the case of a band saw, this factor is most pronounced. The tool does not need to be held by hands during use, the workpiece will only need to be guided against the stop. The machine will not come off or break out, as can happen with a chainsaw. That is why, if you need equipment for woodworking, you should pay attention to the Corvette 31, which will be discussed in the article.
Description
The aforementioned equipment is a saw for safe and reliable operation, if necessary, radius or direct sawing of plastic and wood blanks. The device works due to an asynchronous electric motor, which is economical. He does not need regular maintenance.
For convenient operation, there are two stops, one of which is for the accuracy of direct processing, while the second is for sawing at an angle. If you want to make the work more economical and accurate, you can connect a vacuum cleaner. This will eliminate the need for cleaning.
Specifications
Saw "Corvette 31" has a capacity of 350 watts. The size of the desktop is limited by the following parameters: 290 x 290 mm. The maximum cut depth is 80 mm. The speed of this machine is one. Transmission is direct.
The diameter of the suction port is 40 mm. The length of the tape is 1425 mm. The table can be tilted at an angle from 0 to 45˚. The maximum width of the tape is 6.3 mm. The equipment weighs 17 kg. The speed of the tape is 882 m per minute.
Model reviews
Saw brand "Corvette-31", according to consumers, has many advantages, among them it is necessary to highlight:
- functionality;
- convenience in work;
- sustainability.
As for functionality, it is provided with a rotary stop. Due to this, the tape equipment allows you to cut parts at an angle of 45 ° or less. Consumers, in their words, also like convenience in work. The longitudinal emphasis in this design is necessary for the accuracy of the cuts, since when the element is run, the size does not deviate.
The band saw of the Corvette 31 brand, as emphasized by home craftsmen using this equipment, is stable. The machine can be bolted if necessary, which will make the installation stable. This will help improve the accuracy of operations.
When consumers consider the Corvette 31 saw, they especially pay attention to the replaceability of the saw band. You can carry out these manipulations independently and quite simply. The table can be tilted up to 45 ˚ if necessary, which simplifies the processing of workpieces and makes these manipulations more comfortable.
When the side cover is opened, the engine will be turned off, for which the limit switch is responsible. After a temporary power outage, the start of the machine will be excluded. The spontaneous start of work does not happen thanks to the magnetic starter. The band saw “Corvette 31”, according to customers, is stable. The machine can be bolted, which increases the accuracy of operations. To connect a vacuum cleaner, you can use the nozzle. Customers also like the small size of the installation.
Description of the machine brand 8-31
In order to make the right choice, for example, you should also consider the “Corvette-8-31” saw. This model of equipment is a combination machine that has a commutator motor. Its power is 1200 watts. He is able to reach speeds of up to 5000 per minute.
The tool is compact and lightweight. Among its advantages, it can be distinguished that it combines a trimming machine and a saw unit. With its help it is possible to carry out inclined, transverse and longitudinal cutting. Work safety is provided with a protective casing. The diameter of the miter saw blade "Corvette 8-31" is 210 mm.
Specifications
If you want to purchase a universal machine, then you should consider the above model of equipment. She works due to the brush motor. Adjustment of turns and illumination at this unit is not. It weighs 9.3 kg. The maximum cut width is 80 mm, which is true if an angle of 45 ° is observed. The size of the desktop is 360 x 250 mm.
This saw “Corvette 8-31” does not have the function of maintaining constant speed under load. The number of revolutions per minute is 5000. This unit does not have a laser and adjustment of the depth of cut. On the upper table, the maximum cut depth is 31 mm. At an angle of 90 °, the maximum cut depth will be 55 mm.
Model reviews
Considering the features of the Corvette 8-31, you should pay attention to consumer reviews. Among others, it should be noted that buyers consider the machine convenient to operate, emphasize its reliability and safety during operation.
As for the convenience of control, it is provided with a handle that sits securely in the hand and is complemented by a start button. One cannot but mention reliability. The top table of the equipment is made of cast metal, which guarantees the reliability and durability of the device. Consumers, in their words, also like the safety that the machine provides. You will be protected from injury through the protection of the saw blade. A rather important factor when choosing this equipment is the presence of a motor brake system.
Reviews about the features of operation
When reading reviews about the Corvette 31, you should also pay attention to us and consumer advice on operation. Getting acquainted with the opinions of customers, you will understand that before turning on the device for the first time, they advise you to pay attention to the reliability of the installation of equipment and the correct assembly. It is important to correctly adjust the thrust bearings, guards and the tension of the saw band to prevent contact with the band and to minimize the risk of damage to the components of the device.
The teeth of the saw band, according to home craftsmen, should be directed down. They should look at the table. The handle of the band saw from "Ankor Corvette 31" should be well fixed, play in the area of fixing the desktop is excluded. Before starting work, it is important to make sure that there are no cracks or damage in the area of the saw band. If you notice such errors, the tape should be replaced immediately. The upper tape guide and the guard that must not come into contact with the workpiece must be adjusted.
Consumers emphasize that operation of the saw near flammable objects is excluded. The desktop should be well fixed during operation. It is important to make sure that on the surface of the table before starting work there are no extra workpieces, shavings and scraps.
After sawing, the workpiece should not budge. This can happen due to the fact that it does not lie flat on the desktop. At the same time, several blanks are not recommended for the master to cut. It may be dangerous. It is important to be especially careful when sawing small, large or uncomfortable workpieces. When processing long elements, it is important to use additional supports. This is due to the fact that the sawn off part may tip over from the desktop.
Do not touch the tape during operation. Before switching on, it is important to ensure that the tape does not touch the surface of the workpiece. Before work, it is necessary to start the equipment at idle and allow it to work for 1 minute.
Finally
The equipment described in the article can be replaced by a similar one, but, as practice shows, it is the most effective and allows you to save effort, money and time. Before buying, it is only important for you to decide which saw to choose with which functionality.
It is important not to make a mistake here. After all, for example, equipment that is designed to solve problems in everyday life is suitable for home use. But in the conditions of production, such a model of equipment will simply not be able to meet expectations.