Lining - a thin board made of natural wood. Such products are additionally equipped with special grooves located on the sides of the boards and functioning as latches for fastening the skin elements to each other. Today, the quality of this material is quite high, and this kind of "board" is suitable for both internal and external decoration. Often, lining is also used for the construction of elite-class housing. Therefore, today the question of how much lining is in a cube is relevant in its own way.
What is this material?
According to experts, lining is one of the best materials for cladding the internal surfaces of rooms. These delicate products demonstrate excellent properties for façade finishes. Of the total number of advantages of the material, the following are distinguished:
- appearance, which is much better than some finishing materials;
- good soundproof properties;
- ability to additionally warm rooms;
- the use of lining is a great opportunity to hide not too aesthetic outdoor communications;
- naturalness, environmental friendliness, hypoallergenicity;
- long operational period;
- a variety of options, not only regarding the type of wood, but in general the material itself;
- Today on the market you can find not only wooden, but also plastic products.
How many lining in a cube: how to determine
For the correct calculation of the required volume of the considered type of material for decoration, it is worth familiarizing yourself with some features in calculating the required amount of material. So, for a wooden lining, in principle, it does not matter with which breed the finish is made, the cubature of calculation is approximately the same.
In order to find out how many lining cubes are in a cube and to carry out calculations with maximum accuracy and fidelity, take the following instructions into account.
Instructions for calculating the cubic volume of lining
Starting this process, measure the basic parameters of the material, including the thickness, length and width of one unit of lining.
It is easier to consider the calculation of these indicators as an example, therefore we take the following dimensions: 18 x 16 x 5000 (mm).
Objective: to calculate how many lining cubes in a cube.
First you need to know the volume of one product. Before starting the calculation, do not forget to convert millimeters to meters and only then substitute the numbers in the formula: 0.016 x 0.14 x 5 = 0.0112 m 3 .
Having received this number, you have to divide 1 m 3 : 0.0112 = 89.28.
Thus, it is easy to quickly calculate the quadrature, both for 7 cubes of lining, and for 70 cubes of material. In addition, you can determine how many lining units are in the package.
Carrying out such calculations, it is extremely important to follow the instructions given in order to eventually get the correct figure.
Many people ask how many boards are in the cube of the lining, but this concept is relative and directly depends on the parameters of the products. With different parameters, they can be from 4-5 to 16 pieces.
Please note that there are also such sellers on the building materials market that they deceive unsuspecting buyers. As a result of rounding the numbers, you get an inaccurate quadrature, which ultimately leads to an increase in the volume of material purchased by you and residuals. In order not to throw money away, we recommend that you read the instructions that describe in detail how to calculate how many meters of lining in a cube.
Some rules that come in handy during the calculation
To avoid overpaying for the material or not to purchase more lining than you need in fact, it is worthwhile to figure out the calculation related to how much is 1 m 3 of area (m 2 ). Calculate in advance the area to be faced. In this case, the thickness of the products is not the last in value, since it can be completely different depending on the material selected.
A lot of people are interested in the question: "Why do I need to know how many square meters of lining are in a cube?" This is necessary, first of all, so that everyone can easily calculate the area that is supposed to be covered by the selected type of material, whether it is lining, panels, drywall or even wallpaper.
The algorithm for calculating the area in 1 m3 of material
The calculation is not difficult - the instructions will be enough to cope with the task.
All lining parameters are recorded, as a rule, in millimeters. In the calculation, all indicators are converted into meters and substitute the values in the formula.
Calculations begin by measuring the thickness of one finishing panel (lining). When buying wooden products, be guided by the fact that the thickness of such finishes varies around 13-26 mm.
After that, a certain number is converted into meters, since the volume is measured in these units.
We will deal with an example when a given panel thickness is 19 mm (0.019 in meters). At the final stage, the cube is divided by this number, which is as follows: 1 / 0.019 = 52.63 m 2 .
During calculations, you should pay attention to such an important point: you can calculate everything even in your mind, but when using the calculator you can get a more accurate figure, rounding not only to tenths, but also to hundredths or even thousandths. Such a result will be as accurate as possible.
Features of calculating the volume of material for finishing
So, you have moved to the most important stage - the selection of material and the acquisition of it in the required quantity. Here, it would seem that everything is simple, but the numbers matter, or rather their accuracy.
Please note that the amount of material used during the decoration will depend on the type of decoration itself: internal or external, so it is important to mention this in advance. We will deal with both examples.
Calculation for interior cladding
It should be determined how many meters of lining in one cube, as well as how much material is required for facing the room. To perform this work, the entire area of the room will have to be divided into several squares (separate areas). So you can come to the application of simple geometric formulas.
Often the room has the shape of a rectangle, although there are also atypical layouts. It is with this option of organizing space that the length of the boards of the lining is of no small importance. The ceiling level may vary.
Keep in mind that if ceiling decoration is also planned, then this area also needs to be calculated and summed.
The length of the boards in this case plays an important role, since it can be different, so it is necessary to measure the length of all segments.
To determine the total area, you will have to measure the height and length of the wall. It is enough to measure only one of the walls, since in typical house designs the parallel areas of the rooms are identical with respect to each other.
Having calculated all the areas according to the formula for determining S of the rectangle (a * b), add all the areas to obtain the sum. It is important not to forget about the door and window structures, which are to be subtracted from the general square of the room.
Another point! It is recommended to add + 10% to the result obtained, since you can not do without waste and force majeure during the decoration. Even if all indicators are precisely determined, waste will be present, albeit in a small amount.
Features of cladding exterior cladding
If it is necessary to perform external cladding of the house, for example, a pediment, the calculations are carried out by analogy with the scheme described above. The only caveat with this kind of work is some difficulties in performing calculations related to the area of the pediment.
The walkthrough looks like this:
- Determine the area of the sheathing surface according to the same scheme as in the previous version.
- To calculate the area of the pediment, take the length of the base and multiply it by height.
- Divide the result in half.
- Add up the numbers, not forgetting to subtract the area of the door and window openings.
So you get a number that determines the amount of material, and based on this result and the parameters of the lining, determine how many pieces of lining in 1 cube.
Everything is extremely simple, the main thing is to know in which direction to move.