Seasonal rubber replacement and periodic updates of the technical fluid are the most common operations that any car owner has to regularly carry out. To keep the vehicle on the go, you must systematically care for it. Otherwise, you will inevitably have to face various unpleasant situations.
Irreplaceable assistants to the driver on the way are a jack, a screwdriver, a wheel wrench. Car repair will be much faster and easier if you use special sets of wrenches in the process.
What is a tool like?
The gate for the heads is a metal handle containing snap in the form of a landing square. Its fasteners to the handle carries out the end-hinged mechanism.
Instrument models vary in shape and size depending on the conditions in which they are used. The gate for socket heads in metalwork and installation is considered one of the most popular types of equipment.
The form
Gate for heads can be presented in the following options:
- Cranked. The tool is used to work with brittle joints. With its help, fasteners are easily turned out, the connection of which is characterized by a slight load.
- Articulated. This head handle contains a special hinge that allows you to turn the tool at any angle. Due to this feature, hinged doors are very popular for working in hard-to-reach places.
- Option in the form of a screwdriver. It is used for small fasteners.
- T - shaped or G - shaped wrenches. They are used when removing transport wheels and wrapping cartridges in machines. This head screw can be found in every workshop.
Additional items
In addition to the handle and accessories, the wrench contains:
- Special adapter. It is desirable to purchase it for those cases when you have to use different equipment in the work.
- Extension. It performs the function of a lever. Extension cords are used to untwist very tightly fastened fasteners, which cannot be dealt with with an ordinary key.
- Ratchets. Perform the reverse function at the gate. In order to tighten or unscrew the fasteners, there is no need to reinstall the tool. When the ratchet mechanism is in operation, the ratchet allows you to turn the knob only in one direction. Loosening or tightening the fasteners, as well as the process of threading using ratchets, is much faster.
Kinds
In plumbing, you can clamp and rotate cutting tools using a product such as a winch as a special holder. For taps, reamers, and countersinks, various types of holders are provided:
- Vorotok clamping square shanks, characteristic for a tap, a die and a countersink.
- The gates holding the threading dies.
- Products in the form of a wrench.
The gate for taps and dies is a hand tool. The principle of operation is that thread-cutting elements are fixed in the winch. Then the tool is rotated, thus cutting the thread.
Dimensions
Before you purchase a set of wrenches and accessories for them, you need to determine their size. In the market of tools, attention is given to winders with diameters of 1, 1/2, 1/4, 3/4, 3/8 inches. For convenience, they are numbered. So, a No. 1-sized wrench corresponds to a diameter of 1 inch. Judging by customer reviews, the most popular are the wrenches, the diameters of which are 1 and 1/2 inches.
What type of connections is the tool for?
Threaded connections have been widely used both in auto service and in all other areas related to equipment repair. Such popularity of this type of connection is explained by the fact that it is characterized by ease of installation and dismantling. If necessary, the master just as easily and quickly disassemble. You can connect two parts together using a welding machine. This process will take a minute. But to disassemble this connection quickly does not work. The welding procedure is replaced if there are bolts and nuts. A tool such as a wrench is specially designed to speed up and greatly facilitate the master's process of tightening the connection.
Products of the company "Bison"
Those who wish to purchase handwheels for socket heads with a diameter of 1/2 can opt for the tool of the Russian company Zubr. This product has the following characteristics:
- The volume of the landing square is Ѕ.
- This collar is made of high quality tool steel.
- The tool has high strength and reliability.
- The design has a swivel mechanism.
- The size of the collar is 25 cm.
- The diameter of the landing square is Ѕ inch.
- The mass of the tool does not exceed 33 grams.
- Manufacturer - China.
- The homeland of the brand is Russia.
It is possible to purchase head wrenches both individually and complete with various accessories: nozzles, ratchet wrenches and bits.
Those who decided to acquire this tool, experts recommend stopping their choice on the products of famous brands. Working with genuine equipment is not only pleasant, but also safe.