Why is it so often when siding the exterior walls of a house that siding is chosen? And here everything is simple - it is affordable, has many colors, among which you can choose the one that you like. In addition, it does not require special care - dust and dirt can be completely removed with a stream of water from the hose. Well, let's figure out how to properly attach this material, as well as what is needed for this.
Installation instructions for vinyl siding
To get started, stock up on quality materials and, most importantly, dried bars for the crate. If the tree turns out to be of poor quality or poorly dried, then at the moment of drying, deformation of the horizontal rows of siding may occur, which are attached directly to the crate - accordingly, the appearance of the facade of the building will be damaged.
When fixing the material, use only aluminum or other fasteners with anti-corrosion coating, because fasteners can break down quite quickly under adverse conditions that are characteristic of our climate. All fasteners should be screwed at a distance of at least 40 cm from each other. This is necessary so that when the size of the siding is changed under the influence of temperatures, its deformation does not occur.
After all, he, like any PVC material, under the action of various environmental factors, has the property of contracting and expanding.
All siding installation instructions advise starting to mount it from the center of the panel to the edges and from top to bottom. This will prevent the curvature of the panel and allow more accurate observance of thermal clearances. When installing, do not forget that the length of the panels should be shorter exactly by its size.
Installation instructions for basement siding
All the necessary tools for this work and the installation principle itself are similar. It is worth recalling that any siding is attached to the crate, which can be made either of wood or aluminum. In addition, the walls themselves must be insulated with mineral wool or other material even before fixing the battens.
It is mandatory to use a vapor barrier, which prevents moisture from entering the rooms and leaving heat from them. And then you can begin to work, which should strictly comply with the installation instructions for siding. Remember that panel locks should be fastened easily, without pressure. This will keep the desired thermal gap between them and prevent distortion during expansion. For the decoration of windows and doors, use special remote trims that do not violate the appearance of the facade and give it additional elegance.
And finally
If you strictly follow the installation instructions for siding, then the work can be done independently. Especially if you learn all the rules, the main of which are the following.
1. Never start decorating two walls at the same time. First finish one, and only then begin the installation of the next.
2. Do not use vinyl or basement siding for floors or roofs.
So simple. But if you still do not understand the installation instructions for the siding or are not sure that you can do the work yourself - contact a specialist. He will definitely do everything as it should, and you will definitely be satisfied with the result.