Compressor equipment is used in enterprises, workshops and private farms to supply equipment with compressed air. Screw constructions can be considered a universal solution (in terms of performance and ergonomics in operation). Among the largest manufacturers of such units stands out ABAC. Overview of screw compressors of this brand will allow you to choose the best solution for a variety of purposes.
Model SPINN 2.2 10-200
One of the youngest versions of the screw compressor in the ABAC line, available on the market for 210 thousand rubles. The unit has a capacity of 2200 W, a capacity of the air mixture up to 200 l, provides a capacity of 240 l / h. Despite belonging to the initial segment, the equipment can be used for industrial purposes, connecting it to three-phase networks of 380 V. In particular, the ABAC screw compressor of this modification can be combined with serviced nodes with a pressure of 10 bar. In terms of the structural arrangement, the model is suitable for a small production site, as it differs in modest dimensions and low weight - of course, in comparison with other representatives of the screw compressor class. Also, despite the small class, the device received technologically advanced means of control and management, including an ergonomic panel with indications and a manometer.
Model MICRON E 2.2
Specialized compressor designed to work with pneumatic tools in car services and small industries. The model is characterized by simple control, which is expressed in easy access to the main technical units and in the presence of devices for physical handling of the structure in different operating conditions. In particular, the design is provided with fixing equipment for attaching the equipment to the surface and a convenient condensate drain system. The performance of the ABAC screw compressor in this design is expressed in power of 2200 W, supported by a pressure of 10 bar and a capacity of up to 220 l / min. The MICRON E 2.2 includes a thermostat, fittings for connecting pneumatic devices and an air dryer.
Model GENESIS 7.508-270
Representative of the middle level in this line of compressors ABAC. The GENESIS family is also considered the most popular in the company's assortment, as it is suitable for a wide range of applications. This compressor is provided with an electric engine at 7500 W and a receiver with a volume of 270 l, which allows you to maintain performance at 1150 l / min. The operating pressure is up to 8 bar. The features of the ABAC screw compressor include the presence of sound-absorbing insulation, which increases comfort when operating the unit in a room with working personnel. The developers also provided for a modern control unit with microprocessor system MC2. This software expands the possibilities of combining several compressors into one three-phase network. For protection, the manufacturer provided the design with a desiccant, which automatically removes excess moisture from the compressed air flows.
Model Formula 3808
The optimal solution for large plants where a stable supply of compressed air in a continuous mode for several shifts is required. This model is provided with a powerful 37,000 W engine, which enables it to maintain a flow rate of 600 l / min. However, such a high potential would not have been possible without the large size of the structure. When planning the acquisition of an ABAC Formula 3808 screw compressor, it should be possible to install a reliable foundation platform for a mass of 826 kg and dimensions of 1300 x 1000 in length and width, respectively. Among the controls, a text display, the aforementioned MC2 unit, automation for monitoring connected systems and the possibility of scheduled maintenance programming deserve attention.
Model Formula 7510
High-performance compressor in the premium ABAC segment. Suffice it to say that the cost of this development is about 1.2 million rubles. For this amount, the owner receives a power plant for 75,000 watts, capable of supporting a capacity of up to 11,000 l / min at a pressure of 10 bar. Although the mass is also an impressive 1260 kg, the designers sought to optimize the dimensions of the model as much as possible. As a result, the ABAC screw compressor of the Formula 7510 modification has received a compact design, which also facilitates installation and maintenance operations. When designing this unit, the creators paid special attention to protective devices, providing a metal casing for isolation from dust and moisture. In addition, it is allowed to incorporate the structure into a single complex of several plants with similar power characteristics.
Features of ABAC compressors
The manufacturer improves both the technical and structural characteristics of the equipment, as well as its functionality. Among the most advanced technological features of ABAC screw compressors are the following:
- Air preparation systems. For this, filtration and dehumidification tools are provided that allow you to adjust the basic physical parameters of the air, excluding mechanical particles and oil impurities.
- Microprocessor control. The MC2 module makes it possible to control all the working units of the unit, as well as activate the energy saving mode.
- Protective functions. The design is provided with the necessary insulation, vibration and sound absorption systems. Electrical equipment is supplied with blocks of protection against overheating and overvoltage.
- Self-diagnosis system. Models of the highest category, within the framework of automatic control, can check the status of the main systems and nodes, notifying of detected malfunctions through an indication.
Spare parts for screw compressors ABAC
Since work under high pressure when supplying compressed air is caused by high loads, you should prepare in advance for unplanned maintenance with the replacement of worn or damaged elements. The manufacturer himself recommends always to keep the following parts on hand:
- Air filter.
- Filter Panel
- Oil filter.
- Tooling for cleaning.
- Belt.
When repairing safety systems, the following spare parts for ABAC screw compressors may be required:
- The door and panels of the electric panel, which opens with a special key.
- Cooling fan
- Filler cap (for oil).
- Valves
- Sealants.
- Mounting hardware for connecting to tools and equipment.
User Reviews for ABAC Products
Mostly equipment is used in enterprises, which indicates high requirements for its performance. And, as the reviews of the direct owners show, this product does not fail during operation. The indisputable advantages of most compressors of this company include the high quality of the element base, which confirms the long working life. Even small consumable fittings last for several years, demonstrating enviable wear resistance. The power base also does not cause any complaints - the declared watts are maintained stably, giving out a sufficient power reserve. Negative feedback on ABAC screw compressors mainly refers to strong vibrations and noise. But this, firstly, applies only to individual models, and secondly, experienced users can easily solve such problems with soft pads, which have the effect of depreciation during equipment operation.
Conclusion
A variety of technical and operational indicators in ABAC compressors allows you to easily precisely select the right model for the needs of any production. The company also does not forget about the indirect properties of technology, given the small ergonomic and functional nuances of its use. However, much in the process of operation will depend on the quality of service. In particular, special attention should be paid to the choice of oil for ABAC screw compressors, which will ultimately determine the efficiency of the working moment, and the composition of air mixtures. It is recommended to use technical fluids of the same brand - for example, DICREA 46 oil is specifically designed for units of this type that are operated at high temperatures. Do not forget about the regular inspection of functional organs and verification of mechanical connections. Work with the voltage of an industrial three-phase network should be carried out only if the compressor's electrical infrastructure is in good condition.