According to modern building standards, utilities in residential premises should not be located outside the structures, as was customary before, but in the internal channels called gates. Today low-voltage and power electric cables, pipes for gas supply and water supply, sewage and heating, as well as air conditioning routes have found their place. An exception is the external wiring in wooden buildings, and gas workers may prohibit laying pipes in grooves. However, the idea of flush mounting is caused not only by aesthetics, but also by the safety of network operation.
Need to use
Shtrob formation has become an indispensable process for almost any repair or construction. This work is laborious and unpleasant, but it is firmly registered in the price lists of installers. Each specialist solves the described problem in his own way. There are those who, if possible, reduce the length of the furrows by the method of building boxes, as well as suspension systems and false walls. Some masters even mount communications after completing rough finishing work on the type of plastering, pouring screed and building partitions. But in any case, the strobes have to be done. In this case, it becomes necessary to use the appropriate tool. Specialists and ordinary consumers today are increasingly purchasing the Fiolent chaser. It is presented for sale in several versions, which will be discussed below.
Characteristics of the model "Fiolent B2-30"
The average cost of this tool is 6000 rubles. Before acquiring, it is important to pay attention not only to cost, but also to quality characteristics, among which it is worth highlighting power, as well as speed and diameter of the circle used. The first parameter is equivalent to 1600 W, while the second is 8500 rpm. As for the diameter of the circle, it is 125 millimeters. The kit comes with two working discs, which are able to provide a 30 mm cut depth.
The weight of the tool is quite impressive and equal to 3.9 kilograms. This Russian equipment is provided with a two-year warranty, which indicates the high quality of the device. Safety is provided by protection against unintentional starting, among other things, the unit is equipped with inrush current limiting functionality. For the average consumer, this feature more clearly sounds like a soft start.
Consumer Reviews
Shtroborez "Fiolent B2-30" works due to a sufficiently powerful engine. Consumers like the fact that the aluminum gear case is a feature of this equipment. The main handle rotates if necessary, among other things, there is an additional adjustable handle. If the equipment is on, then you can not be afraid that it will be accidentally involved. The mechanism will last a long time, since it has built-in protection against overloads.
The “Fiolent B2-30” shtorez is quite widespread among consumers as it is delivered complete with everything necessary to immediately begin work. This includes discs with a nut, an additional handle, a protective cover, as well as a key. According to users, the equipment is suitable for specialists who work in the construction or repair, are engaged in laying cables or pipes. The tool is equipped with stepless adjustment of the cutting depth, and a neat start will be provided by a soft start system. During the work you will not get tired, the operator’s hand will not be overloaded, since the trigger can be locked. This indicates that the “Start” button does not need to be kept pressed during operation.
The Stroborez "Fiolent B2-30" is convenient in operation, since the width and height of the cut can be adjusted, the maximum values are kept within 30x30 millimeters. An additional handle for ease of operation can be installed in one of two positions. When the carbon brushes of the equipment become unusable, wearing out, they automatically turn off. Thus, the tool owner does not have to keep track of this.
Additional model features
The equipment described is extremely functional, you can connect a vacuum cleaner to it with the help of a nozzle, which allows you to work indoors, avoiding the formation of dust. The manufacturer guarantees not only safety, but also reliability. These characteristics are provided by a rubber insulated power cord, which will show high strength even in difficult conditions of construction sites.
This “Fiolent” shtroborez was developed taking into account ergonomics, therefore its form provides simple and maximum comfortable control. With the help of an additional handle, the master can confidently hold the tool, thus reducing stress and fatigue during prolonged use. Foreign objects and dust will not accumulate in the nodes, since ventilation works efficiently. This also applies to the cooling system, which eliminates the overload of the device.
Characteristics of the model "Fiolent B1-30"
If you are interested in the chisel-furrower “Fiolent B1-30”, then you can purchase it for 5300 rubles. Its characteristics are somewhat different from those possessed by the above tool. With its help, you can easily and quickly cut brick blocks, metal or concrete products. He copes with making a strob for an electric cable. The device can be used as an angle grinder to clean and grind stone or concrete.
The equipment is characterized by a long service life and high reliability, which is ensured by an improved electric drive and high-quality components. This “Fiolent” chamfer-cutter has a power equal to 1100 W, while the groove width and the cutting depth remain the same as the tool described above can provide. The equipment weighs 3.5 kilograms, and also has a soft start function. The spindle speed is 6,200 rpm. The complete set is supplemented with a nut, a key, a box, an additional handle, as well as a flange. There is a protective cover.
Customer reviews
This model is most often chosen by consumers for the reason that it combines the functions of a chamfer and angle grinder. As a feature, it is possible to adjust the width and depth of the cut. If necessary, fairly quick access to the brushes is provided. Consumers note that, depending on the type of work, the device can be equipped with a 125 mm circle intended for gating, or 150 mm for cutting, it is used in tandem with an additional casing. Soft start provides a gradual set of maximum speed that the tool will maintain for a long time. Experienced craftsmen note that the aluminum gear housing is able to provide strength and will be responsible for efficient heat dissipation. In this case, the engine does not overheat, even if the loads are extremely high.
Characteristics of the model B3-40 F0054
Also on sale is the shankorez “Fiolent B3-40”, reviews of which you can read in the article. Its cost is higher compared to the two models described above and is 7400 rubles. This equipment is intended for laying strob using dry cut technology in walls of limestone blocks, shell rock, brick, and also reinforced concrete. You can use the tool for cutting metal, cleaning, grinding and processing concrete, as well as stone. The power of the device is greater and equivalent to 1600 watts. In this regard, the maximum width of the groove, which is 41 mm, has been increased. This also applies to the depth of cut, its maximum value is equivalent to 41 millimeters. Spindle speed - 9000 rpm. The diameter of the disc is 150 millimeters. Along with the more impressive characteristics of the model, it is worth noting the increased weight, which is 4.3 kilograms.
Reviews
Choosing the “Fiolent B3-40” chipper, consumers note that they are especially attracted to the combination of two tools in one product. Among other things, the operator can smoothly adjust the depth of the groove. As buyers emphasize, it is possible to process all kinds of materials with the tool, using it as an angle grinder. You can adjust the groove width stepwise using washers. Overload protection is provided by an electronic integrated system. You do not have to worry about safety, as the drive has double insulation. If you decide to purchase such a Fiolent wall chaser, then at the time of removal of the protective cover you can expand the range of work performed.
Consumers especially note that the kit contains everything you need, including a pipe to maintain the workplace in perfectly clean condition. The motor windings are armored, therefore they are reliably protected from contact with dust. At the time of start-up, the gearbox is reliably protected against overload due to smooth start-up. The tool is equipped with removable covers that allow you to quickly replace worn out brushes. With the help of convenient access, it will be possible to monitor their status. Experienced users note that it will be possible to change the cutting tool with the help of a convenient fixation of the spindle.
Operating Instructions for Models B1-30 and B3-40
Shtroborez "Fiolent B1-30" must be periodically subjected to maintenance. It can be periodic or scheduled. In the first case, the work is performed by the consumer himself, he cleans the tool from contamination after completion of work. During operation, you can tighten the fasteners if such a need arises. Scheduled maintenance should be performed every 50 hours of running hours. In this case, the master must check the condition of the armature collector.
Gearbox lubrication must be inspected and replaced if necessary. This also applies to brushes. If, while inspecting the Fiolent B3 chaser, you notice that the length of the brushes is less than 8 millimeters, then they should be replaced. Their outlet ends should not be stretched, it is important to ensure the free movement of elements in the holder. After you have made the replacement, the furrower must be turned on and left idle to run the brushes in. This will take about 3 minutes.
Shtroborez "Fiolent B1-30", the reviews of which were presented above, must be lubricated by the gearbox, which should be done using a mixture that consists of 70% lubricant LS-1P from 30% I-20A oil. However, previously you have to get rid of the old grease. The life of the furrower is 6 years, but this period is valid if the buyer observes the operating instructions. Use this equipment in a moderate climate or temperature range from -15 to +40 degrees. Humidity should be equal to 70% or less.
It is important to ensure that atmospheric precipitation does not get on the case, and the equipment itself is not in conditions of excessive dust. Shtroborez "Fiolent", reviews of which, perhaps, will allow you to understand whether to purchase this device, has double insulation, this indicates that it is not necessary to ground the unit. Before starting work, check the completeness and securely fix the parts. The master should carry out an external inspection, checking whether the power cord is working. The drive enclosures must be intact with regard to the grip.
Conclusion
Before starting work, you can check how good the tool is, for this it is launched and allowed to work in idle mode. When installing circles, it is important to be extremely careful, this also applies to the moment of transferring equipment with installed circles. Incorrect movement can not only cause serious injury, but also damage an expensive tool. Also, therefore, the desktop must be cleaned of foreign objects that may interfere with conveniently positioning the unit on the table during operation and in breaks.
Stroborez "Fiolent" should be used exclusively for its intended purpose. If necessary, install the wheels, spindle, and nut sleeve must be cleaned of dirt. The nut is tightened with the wrench included in the delivery. At least one sleeve should be installed between the two circles. When setting the circles, the arrows indicating the direction of movement must coincide with the arrows on the gearbox.