Akvilon made of galvanized steel with a polymer coating is a decorative strip, which has the form of two corners nested in each other. The aquilon is intended for decorative finishing of the bulk space, it carries a leveling function. Installation is carried out in tandem with a sloping bar. Using this element, you can hide minor irregularities of slopes that do not exceed 3 cm, this is true when it comes to standard aquilon.
Appointment
Akvilon from galvanized steel with a polymer coating is a strip that is used in the installation of slopes. An element is made of a single piece of sheet metal and acts as a clothespin, where the edge of the slope is clamped. This design ensures the rigidity of the element, and also guarantees the most tight clamp of the slope near the window frame. The bar is installed directly on the frame using self-tapping screws. The slope is located in the gap and is located between the two corners of the aquilon, while additional fasteners are not required, on the other hand, the element is fixed to the facade.
Installation System Benefits
When an aquilon of galvanized steel with a polymer coating is installed, during which the above method is used, you can count on the fact that the fasteners will be decorated with a slope, this makes the opening completed and attractive. If it is not possible to fix the aquilon from the edge of the window, then it should be deployed and fixed on the back side, however, in this case, the fasteners will be visible. Due to the fact that the width of the aquilon shelf is 20 mm or more, it is possible to reduce the amount of work that is associated with adjusting the slope to the angle of the facade with respect to the window frame. Aquilon is made in the same color as the slope, so it merges with the opening and creates an unsurpassed style of framing the door and window.
Benefits of Using Aquilon
Akvilon made of galvanized steel with a polymer coating has high rigidity, this ensures the tightness of the slope to the facade surface. After installing this element, you can be sure that precipitation will not fall under the bar. When making fasteners there will be a minimum number of visible elements. If it is not possible to fix the aquilon at the edge of the opening, then it is deployed and attached from the opposite side. Akvilon has a fairly wide shelf, this eliminates the need to fit the sloping strip.
Installation Recommendations
Along with aquilon, window strips, as well as drainage, which are made of galvanized steel, are used in the design of openings. At the same time, steel brackets act as fasteners, the distance between which can be from 900 to 1000 mm. They are fixed on the wall with dowel nails, the dimensions of which are 80x8 mm. When finishing windows, it is important to finalize the installation and installation of the guide to analyze the position of the element using the building level.
At the next stage, the connection with the brackets is made, using self-tapping screws. Under the sloping slats, fiberglass or basalt heaters can be placed, the thickness of which will be provided for by the design solution. A vapor-permeable membrane can be placed on top of the insulation layer, which will protect the insulation from rain moisture. Among other things, the material will not be blown away by the wind. Window decoration involves laying on the heat insulation of the sloping strip, while it is important to leave a small ventilation gap, which should be located in the upper part of the cladding.
Cost
If you want to refine the window opening with the Aquilon bar, then you should first familiarize yourself with the prices of these products. Thus, a three-meter aquilon will cost 225 rubles. a piece. But if you purchase an item from an authorized dealer, then the price can be reduced to 180 rubles. Some companies sell aquilon, indicating the cost per linear meter. One of them is Gelmarus, which can be purchased with a window strip for 50 rubles. per linear meter. The window opening can be trimmed with a bar, which is performed in imitation of wood. The standard length of this element is 2 m, and the price per unit of goods is 216 rubles.
Calculation of the required amount of material
Aquilon, the price of which is considered acceptable, is calculated before purchase. In order to find out how much it will be needed to decorate the opening, it is necessary to add the lengths of the side slopes and the upper part of the opening. From below, this bar is not installed, since the ebb will be located there. If the latter is not provided for by the project, then it is also necessary to summarize the lower length of the window opening.
Carrying out the calculations, you must add 6 cm on each side of the window, these centimeters will go to trim when joining the corners. If you will be purchasing galvanized aquilon, then you should take into account that when calculating the material, it must be remembered that an integral siding panel must be installed on each side of the opening. This is due to the fact that the trim at the docking will not look so attractive, and the windows are the first thing that the eye falls on when examining the facade.
Specialist recommendations
When installing aqvilon, you must remember that the material is capable of shrinking in the cold season, but when the temperature rises, it expands. When installation is carried out at a low temperature, the gap should be approximately 10 mm, while in the warmer months, the gap size varies from 6 to 9 mm. Fastening with screws for the same reason is not very tight. The gap between the cap and the panel blade should be approximately 1 mm.
Conclusion
It should be remembered that the installation of akvilon, which is also called the near-window bar, is not always justified. For this reason, the presence of accessories that are used for the installation of vinyl siding should be provided for an individually taken object.