An angle grinder is a tool that has a rather obstinate character. Using this equipment, you can grind, cut and clean surfaces, but the unit works at high speeds, and sometimes it can be difficult to hold it in your hands. As a result, high accuracy is not expected. To solve this problem, the rack for angle grinders is excellent, you can make it yourself quite easily with your own hands.
For this, craftsmen usually use metal, but some have even learned how to adapt wood, because it is easy to process and affordable. Practice shows that such a solution is very short-lived, but is great for those who do not use the grinder so often.
Isn't it easier to get
The rack for the grinder has recently become an excellent assistant for professionals and home craftsmen who are used to working with an angle grinder. The device is very convenient, and if you have to operate the equipment often, then if necessary you can purchase an additional tool so that you do not have to spend time installing it on a rack each time. If this approach is unacceptable for you, then you can make a stand yourself.
In addition, Chinese-made models are not ready to last as long as we would like. They are made of sheet metal by stamping technology. Vibration of the tool leads to the fact that light parts from vibration fly apart, and the design itself is lightweight, and also has a low level of stability. Purchasing an expensive rack option can be expensive. If you are not considering such an approach, then it is better to make a device for installing the grinder yourself.
What material to choose for the manufacture of a tripod
If you will make a rack for angle grinders with your own hands, it is important to think about what material to use for the work. The most commonly used profiled metal pipes. This material is the most reliable and strong, which is why it is so popular.
However, some problems may arise, consisting in the fact that the master will have to use the technology of electric welding. Equipment for this at hand may simply not be found. However, almost all welding work can be replaced by using strong bolts that are installed in pre-drilled holes. This option is the best approach, because in this case it will be possible to disassemble the machine.
What you need to make a rack
Quite often, recently, home craftsmen made a rack for angle grills with their own hands. If you decide to use profiled pipes in your work , then workpieces should be cut from them and holes drilled. Before cutting pipes, it is important to clarify the dimensions so as not to spoil the expensive material.
In the work, you can use wood, in this case, the rack can be made with less labor. But the process can have some difficulties, expressed in poor quality of components and wear of the material. Therefore, it is recommended to use high-quality lumber, which is not subject to deformation.
Preparation of tools and materials
If you will make a rack for angle grinders with your own hands, then you must take care of the availability of tools and materials, such as:
- bolt;
- screw;
- nut;
- drill;
- pliers;
- screwdrivers;
- a metal sheet;
- grinding wheel;
- keys set;
- self-tapping screws;
- welding machine;
- drilling machine;
- square;
- milling cutter;
- washer.
Design Features
Before you begin work, you must determine what nodes the structure will have. It may have a bed, which is a metal or wooden plate in the form of a frame. Sometimes the system is supplemented with a carriage for material and tools. If desired, you can mount the transfer unit on casters. If you want the grinder or material to be shifted by a certain angle, then you should consider the inclination units.
Making the simplest model
You can make a rack for angle grinders with your own hands, it is recommended to consider a photo of these structures in advance. They are offered in the article. The simplest solution will be the holder, which is made of metal and textolite. You can use only the first version of the material. In this case, it is better not to use wood, since it will not be able to withstand loads.
The device will be in the form of plates that are fastened together by screws or by welding. The latest technology can be used if only metal is used in the work. Bolts need to be applied when the design will assume the presence of a PCB. One of the plates will serve as a mobile platform, it can be made of steel 3-mm sheet or duralumin. This element should have dimensions equal to 35 x 15 cm.
As an alternative solution, you can use textolite, but in this case you should use a 6-mm blank. If a stand is made for a grinder with angle grinders with their own hands, then the second plate will perform the stop function. It is made of a 4 mm length of steel, the dimensions of which are 125 x 50 mm. This unit will bear the main load, so it is not recommended to use thin metal. Otherwise, working with the rack may be unsafe.
Several holes should be made on one half of the plate using a drill with a diameter of 4.5 mm. This will allow fixing on the platform. An 8 mm hole should be made in the central part of the second half. Holes are made in the platform and reamed on the back to install countersunk screws. Instead of the second plate, you can use a 4 mm corner, having drilled it accordingly.
The corner or plate is screwed and welded to the platform so that the cutting disc is 5 mm from the edge of the bed. When the do-it- yourself stand for angle grinder 230 is made , the corner must be bent 60 Ā° C in relation to the bed. The cutting power tool should be fixed on the upper part with a bolt with a lock nut, this will eliminate the turning of the bolt and vibration during work. On this we can assume that the device is ready.
Add-on racks with knots
In order to provide increased cutting accuracy and facilitate work, the device should be supplemented with metal squares and wooden blocks, their dimensions should be as follows:
- 30 x 30 x 420 mm;
- 27 x 30 x 35 mm;
- 55 x 30 x 80 mm;
- 120 x 60 x 25 mm.
From the end of the longest square, measure 12 cm and bend the workpiece in the shape of the letter āGā. In this element and the main platform, drill holes to be drilled for countersunk screws. At the next stage, the plate and the square are connected, the bars are laid on top, and after the structure should be screwed on. In order to facilitate the work, you need to install an additional handle.
Another rack assembly
When the stand for angle grinder 125 is done by yourself, it can be supplemented with another unit. For this, a universal limiter is used in the form of a guide, which is made of metal strips, their width can vary from 75 to 100 cm. There should be two such blanks.
You need a square, its length can be equal to the limit from 30 to 70 cm. Having borrowed the roller units from the door drawers in the amount of 2 pieces, you should supplement the rack with these units. Assembly is carried out according to the following technology. Guides are fixed to the platform, and two strips are screwed on top. Their ends should be equally spaced from each other. The square is fixed at the ends of the strips so that it bends down. When a do-it-yourself rack for a grinder (angle grinder) is made with your own hands, clamps or a screw clamp are used to fasten the roller assemblies. It should consist of an 8 mm plate, the length of which is equal to the main platform. Whereas the width can be equal to the limit of 5 to 8 cm.
Conclusion
A fairly popular household tool has recently become an angle grinder. It is an indispensable device for installation and repair and construction works. With it, you can cut stones and metal, as well as other structural metals. But to operate such equipment can be quite difficult, because its working parts move with great speed. You can make a stand for angle grinders with your own hands, you can find drawings of such structures in the article. This device allows for accurate cutting and vibration reduction.