If you often work outside the city or in the garden, and also carry out construction work, then you can not do without a chainsaw, the power of which should be selected depending on the tasks assigned to the tool. This factor is fundamental and determines the ability of the equipment to handle heavy wood. But you must also consider whether you need, for example, a professional tool.
In order to understand your needs, you need to think about the estimated loads on the unit. If you do not cut thick logs, then a power of 2 kW is more than enough. But for personal construction, you can pick up a more powerful tool at 2.6 kW or less. However, it must be borne in mind that with increasing power, the weight will increase and it will be more difficult to control the tool. You must also choose a manufacturer. The Carver chainsaw, for example, can be an excellent solution, and it will be discussed below.
RSG 252 Model Description
This version of the chainsaw will cost you 6,500 rubles. The equipment is powered by a two-stroke engine cooled by an air system. Suitable tool for intensive use in farming and in the preparation of firewood. This Carver chainsaw is characterized by its quick start ability and is equipped with an anti-vibration system. This ensures comfortable operation, as does the 50 cm saw bar and chain supplied. The manufacturer supplemented the tool with working gloves.
The case is made of material resistant to low temperatures, so you can work with equipment even in winter. The manufacturer provided easy access to the air filter, and an ergonomic handle ensures ease of use. The engine is manufactured in accordance with international standards, and the fuel consumption of the model is reduced by 20%. The long service life of the saw is also guaranteed by a metal crankcase.
The inner surfaces of the engine cylinder have a special coating that increases the wear resistance of the cylinder-piston group. A high level of safety is made possible by an instant chain brake. For a more accurate cut, the tool now has a sturdy gear stop. But the anti-vibration system works according to a multi-point scheme and is needed in this equipment to extend the operating time.
Model reviews
The above-described “Carver” chainsaw, according to customers, is characterized by high power and is fully consistent with equipment belonging to the professional class. Novice masters emphasize that the tool is easy to use, but somewhat heavy. And a number of consumers did not find any flaws at all, while others, on the contrary, did not have advantages.
For example, when a consumer checks the unit in a store, then it can idle without any complaints. However, some experts note that upon arrival they install a chain and a tire, while the tool begins to wedge and smoke.
Description of chainsaws brand RSG 241
If you are interested in this Carver chainsaw, then you should pay attention to its main features, among them it is worth highlighting not so high cost, which is 6000 rubles, as well as a 40-cm tire and chain from REZER. Convenient and safe operation is provided by an emergency circuit stop system. Suitable equipment to perform tasks in the household and household plot.
The tool is able to work well at low temperatures, and the primer makes it easier to start a cold motor. This Carver chainsaw, reviews of which you can read below, comes with suede gloves. The engine capacity is 41 cm 3 and the chain pitch is 3/8 inch. This household tool has a capacity of 1.3 kW, which is equal to 1.8 liters. from. The tool weighs 5.8 kg and the number of links is 57.
Model reviews
This Carver chainsaw, reviews of which are often the most positive, has all the generally accepted systems for such equipment, among them:
- quick engine start;
- easy engine starting in difficult climatic conditions;
- easy access to the air filter.
According to customers, you can work with this equipment even at the lowest possible temperatures. The handle is ergonomic, therefore, the operator during operation can reliably grasp the saw, which will increase the level of safe use. In this case, as in the above, fuel economy is 20%. As buyers emphasize, sometimes they choose this equipment due to this factor.
Carb adjustment
The Carver chainsaw, the price of which was mentioned above, has a carburetor. It requires adjustment, which can be done independently. Screws H and L are needed to adjust the gas to air ratio. The enrichment of the mixture can be achieved by unscrewing the screws, the speed will decrease, and when the mixture is twisted, it becomes leaner, and a reverse reaction is expected.
Using screw S, you can adjust the idle speed. To simplify the adjustment, the number of carburetor screws available is reduced. The Carver chainsaw carburetor was initially set up in the factory, but similar work would need to be done even with the engine turned off. Final adjustment is carried out on a running warm engine. After reading the instruction manual, you can find out what the exact value of the rotation angles is.
Specialist advice
The speed adjusting screws should be slowly turned clockwise, they must be installed in the final position. Then the screws are turned back two turns, however, there are other settings. When adjusting the Carver chainsaw, you can find the most possible idle speed, for this screw L should be tried to turn in different directions.
Once the position of the highest revolutions was found, you should turn this screw a quarter of a turn counterclockwise. When the chain thus rotates, screw T must be turned counterclockwise until it stops.