The production of stoves "Student" is carried out by the Russian company "Termofor". Also, this company actively manufactures various boilers and fireplaces. A distinctive feature of the Student ovens is its large heating area. At the same time, the tightness of the device is pretty good. All this allows more efficient use of the heater.
Heat exchangers during operation are completely flameproof. In addition, it should be noted the volumetric furnace of the Student furnace. Thanks to this, it is possible to lay a large amount of solid fuel. Food can be heated on the Student ovens, and the upper panel, which is perfectly even and located at an angle of 90 degrees, will help. Grate in all models - removable type. If necessary, it can be easily disconnected and open access to the ash box.
Reviews about the furnace "Professor Butakov Student RV"
This furnace "Professor Butakov Student" reviews is good. Many buyers appreciated this model for its convenient air flow regulator. In general, her characteristics are acceptable, the rated power reaches 9 kW. At the same time, you can melt a room with an area of up to 150 square meters. m
Firewood is used as solid fuel, but chips can also be used. The furnace in this model is trapezoidal in shape. According to customers, her door is quite comfortable. Thus, it is possible to load the stove very quickly with firewood. Pipes in this model are convective type. They are installed in the front as well as the back of the device. Thanks to this, the heating process of the home is quite fast. Function of long burning in the Student furnace is provided.
The chimney in this modification is connected at the top of the structure. Its diameter with standard equipment is 120 mm. To design the convector, manufacturers use anthracite. The door in the furnace is completely made of steel and does not have a window. In this case, this makes it impossible for the owner to monitor the operation of the Professor Butakov Student furnace. This model is worth 13 thousand rubles on the market.
Opinions on the model "Butakov Student GZ"
This furnace "Professor Butakov Student" reviews are mostly positive. This model differs from other modifications in a sealed ash pan. It is located in the lower part of the structure. If necessary, it is possible to put it forward for cleaning.
The power of this modification is standard and is 9 kW. This is enough to heat the house with a total area of not more than 150 cubic meters. m. The furnace in this model is designed for 70 liters, and the door in it is provided by the manufacturer steel, without a window. There is a long burning function in the Student oven, which is also popular with consumers.
As buyers note, the dimensions of this unit are quite compact. The length of the device is 532 mm, the width is 371 mm, and the height is exactly 800 mm. In this case, the chimney is installed with a diameter of 120 mm. Pipes in this model are convective type. Ducts can be connected to it. At the same time, they can well help to remove heat to other rooms. There is a model of "Student GZ" in the market of 13 thousand rubles.
Student DT Model Overview
In general, the data from the Student furnace are good reviews. This model is great for people who want to hide a chimney. In this furnace, there is an outlet for it at the rear of the structure. Thanks to this, you can hold the chimney behind the partition. Among other things, it should be noted the high performance of this modification. This was largely achieved due to the uniform distribution of gas guards. In this case, the pipes are always in a heated state.
The door in this model is made of steel. Directly below it is a convector. The secondary air jets are located behind the firebox and do not take up much space. The installation of the Student DT furnace is quite simple. According to experts, a chimney is needed at least 5 meters long. Moreover, its diameter should be 130 mm.
Consumer reviews about the Butakov Student BH oven
The data of the Butakov "Student" furnace deserved the most diverse reviews. Some customers liked this model for its large hob. Wood is used as solid fuel for the furnace. The loading window for this model is quite large. At the same time, the door of the furnace is completely made of cast iron. Of the features you can highlight a glass window near the handle. Thanks to this, you can monitor the combustion process.
The device is quite simple to maintain, and you need to clean the ash pan at least once every three weeks. The chimney in this modification is located in the upper part of the structure. Pipes are installed convective type and are located at the rear of the furnace. At the same time, gas guards are mounted above them. Thanks to the door lock, the furnace closes reliably and is tight. The price of the model "Student BH" fluctuates around 18 thousand rubles.
Stove Student SG
As buyers note, the Butakova Student SG furnaces are extremely easy to use. You can clean the ash without stopping the combustion process. All this is made possible thanks to a special drawer. The gas generation system in this model is provided by the manufacturer. Among other things, you should highlight the high power of the device. As a result, this stove is best suited for large cottages with a total area of more than 200 cubic meters. m
This modification has huge dimensions: height - 522 mm, width - 380 mm, and depth - 660 mm. The oven weighs exactly 80 kg when assembled. The case in Student SG is made of steel, but there is a window with heat-resistant glass. For wiring ducts, manufacturers have provided a special heat sink. As some consumers note, the furnace can quite successfully work on coal. At the same time, performance indicators do not fall significantly. This model will cost the consumer in the market about 16 thousand rubles.
What is the difference between the Student SK model?
Heating stoves "Student SK" are able to boast a reliable steel grate. At the same time, the furnace is quite voluminous. At one gas station, the stove can work for about 13 hours. It is allowed to load the camera with coal, however, in this case, performance will slightly decrease. Pipes in this modification are installed convective type. Thanks to this, the high temperature lasts quite a long time. Function of long burning is provided by the manufacturer.
Among other things, the possibility of connecting special ducts should be highlighted. In this case, heat can be removed to all rooms of the house. The chimney in this model is installed on the rear panel of the housing. Thanks to this, a large cooking area is freed up from above. The door leading to the loading chamber is made of durable cast iron. Directly, the handle is very convenient to use, and thanks to a reliable lock, the firebox can be reliably closed for greater tightness. There is a modification of "Student SK" in the market of about 16 thousand rubles.
Reviews about the furnace "Butakov Student ZhS"
In general, the data from the Student furnace are good reviews. Many customers liked this model for its compact size: length is 530 mm, width - 370 mm, and height - 780 mm. The hob in this modification is not provided, which upsets. According to experts, the installation of the furnace is very simple: and for this purpose, manufacturers equipped the lower part of the structure with convenient clamps.
The chimney is mounted without any problems. Its minimum diameter should be 100 mm at a height of 6 m. The firebox has a volume of exactly 70 liters, this is enough to load up to 17 kg of firewood at a time. The furnace power is 9 kW. Given this, it is advisable to install this modification in rooms with a total area of up to 130 square meters. m. At one gas station, the heating system will work up to 15 hours. There is a model "Butakov Student ZhS" in the market of about 13 thousand rubles.
New modification - "Hydraulic Student"
Gidravlik Student stoves are produced with a gas generation mode. At the same time, the manufacturer provides a combustion control system. The ash box in the device can be easily extended if necessary. There is a cooking area at the top of the structure.
The grate is installed in the system of a removable type, and it is made of steel and is quite durable. With it, it is possible to control the air supply to the chamber and monitor the room temperature. A clear drawback in this situation is its too low location. Given this, you have to stoop strongly to change his position.
There is a special casing on the door as a radiator. Thanks to this, the handle does not heat up at all, it can be used even with prolonged use of the oven. Additionally, many noted the convenient location of the pipe. In this model, it is installed at the top of the structure. Such a change made it possible to otherwise distribute the condenser pipes. As a result, the productivity of the furnace has increased significantly.
Summarizing
Summing up, we can say the following: the most comfortable is the Student SK model. This modification can be quite successfully installed in cottages, as well as in large houses. The productivity of the furnace is good, while the consumption of solid fuel is acceptable. Given this, you can greatly save on heating your home. Which, in fact, is noted in all of their reviews by users.