Saw brand Makita LC1230 is a modern installation tool, which is intended for professional use. Using this equipment, you can cut metal corners, pipes and profiles. The saw has a reliable engine, the power of which is 1750 watts. It allows you to quickly and efficiently saw parts without the formation of chips. There is no need to use a special tool to set the cutting angle. Workpieces are fixed with a quick clamping vise.
All these and other characteristics make buyers incline towards the described model, because you can use it both in everyday life and in workshops that are engaged in cutting material. If you decide to purchase this tool for yourself, then you need to take care of the allocation of free space for it, because the equipment, although compact, but requires a separate table in the room.
Technical Specifications Reviews
The Makita LC1230 saw has a disc with a diameter of 305 mm. As for the depth of cut, it is 115 mm. Users do not really like that the tool does not have a soft start, however, this drawback is compensated by many other advantages. For example, the cable length is 2.5 m and allows you to work with the tool without restrictions. The landing diameter of the disc is equivalent to 25.4 mm.
Consumers claim that a cutting width of 150 mm is enough to carry out a wide range of work. However, there is no support for constant revolutions under the influence of the load in the equipment. It is worth considering that the device weighs 19 kg, so a reliable table is required to install it. The number of revolutions per minute varies from 0 to 1300 units.
A little bit about the configuration
Makita LC1230 has a complete set, which includes a carbide blade with 60 teeth for cold cutting. Consumers note the presence of safety glasses and a socket key as advantages.
Key Features Reviews
The described brand of the tool has, according to customers, many positive features. Among them, the possibility of reliable fixation and comfortable grip, as well as safety, can be highlighted. As for reliable fixation, this functionality is relevant in relation to quick-clamping vice, they are used for reliable fastening of the workpiece. Consumers claim that the handle provides a comfortable grip, which creates the conditions for confident work.
The metal disc guard provides safety, while the operator can hope that it is well protected from injury. Saw brand Makita LC1230, as emphasized by customers, has many advantages, among them are:
- light weight;
- double protective insulation;
- compact sizes;
- Keyless change of a corner of a cut.
Performance Reviews
The cutting machine described above can be used for the most accurate cutting of aluminum, plastic, steel, copper and iron billets. Using this equipment, you can cut the steel profile or cable channels. Cutting is not accompanied by the formation of smoke and sparks. The unit belongs to the professional class of equipment, and the angle for cutting varies from 0 to 45 °. Landing of the cutting disc is 25.4 mm.
Before you begin, you should familiarize yourself with the depth of cut. If we are talking about 90 and 45 ° with longitudinal cutting, then the depth is 115 and 90 mm, respectively. If cutting is carried out at the end, then at an angle of 90 °, the depth is equivalent to 75x150 mm. As for the depth of the end section at an angle of 45 ° C, it is equal to 85x85 mm. The Makita LC1230 saw is compact enough, users claim. The dimensions of the tool are 516x603x306 mm.
The tool is durable, it can be used to precisely cut parts. The machine has a powerful engine and provides high performance. The carbide disc has a carbide edging, with the help of this add-on you can achieve the perfect cut without burning and burrs. The disk is characterized by increased wear resistance. As users emphasize, this significantly reduces the cost of purchasing supplies. Due to the fact that sparks do not form during metal cutting, the tool can be used under conditions that require special safety requirements. Consumers like that the model is equipped with a special dust collector, however, for its proper operation it is necessary to carry out periodic cleaning.
The Makita LC1230 cutting saw has a protective cover and spindle lock. The latter is necessary for quick change of the cutting element. The use of an additional tool when attaching blanks is not required.
Positive feedback on usage features
Mounting saw Makita LC1230 has many advantages. Among them, one can single out that the tool is ideal for skillful use. If you saw pipes whose walls range from 3 to 4 mm, then a maximum of 220 cuts will be sufficient for the disk. From this we must conclude, which consists in the following: if you have to cut thin-walled profiles using a factory disk, then it can last for a long time. If you need to work with more massive materials, then you should additionally purchase consumable disks.
According to users, the cost of Makita discs is higher. If you want to save money, it is best to purchase Bosch brand wheels. With the help of the described saw, as buyers emphasize, it is possible to obtain clean cuts, while usually within three years about three disks leave. The clip, according to users, is convenient. This can not be said about the native disk.
All users note the high quality of the cut. If the disk is new, then it does not form sparks, which is very important when working in rooms where explosive dust and gases can accumulate. All consumers who have already purchased a Makita LC1230 metal cutting saw have noted that it has excellent performance, even a profile pipe with dimensions of 80x80x4 mm will not be a problem for it. A very convenient addition is the fact that there is a removable tray in the kit, where the chips are going to.
Negative reviews
No matter how high-quality the instrument may be, negative reviews can always be heard about it. From them, you can understand that the disk supplied by the manufacturer in the kit is intended exclusively for thin profiles ranging from 1.2 to 1.5 mm.
The disadvantage, according to customers, is the lack of a soft start. Some buyers also note impressive weight. Among other things, the use of the unit is not always convenient, because it is easier to measure the workpiece to the right, and not to the left. Therefore, there is a need to turn roulette.
Why it is still worth buying Makita LC1230
The described equipment creates quite a bit of noise, the workpiece heats up a little, but this is not so critical. The workplace is kept clean, because the sawdust falls into the tray. Among other things, there is no unpleasant smell of burned material, as when working with abrasive disks. It is impossible not to mention the acceptable cost, which will be available even to the average buyer. By the way, it is 26,220 rubles. Makita LC1230 pendulum mounting saw can be an excellent solution for domestic and industrial use. The disk almost does not wear out, even if several hundred cuts are made using it.
Supplies cost
Makita LC1230, a disc on which you can purchase for 2360 rubles, is sometimes supplemented during use by consumables produced by other companies. However, if you prefer original spare parts, you should also pay attention to the saw blade for metal, the dimensions of which are 305x25.4 mm. You will have to pay 17,400 rubles for such a disk.
If you are interested in a saw blade, which has 60 teeth, then you will have to pay 8800 rubles for it. Its landing diameter is 25.4 mm, while the diameter of the disk itself is 305 mm.
Conclusion
In order for the user to be able to quickly and safely change the working nozzles independently, the saw provides for the possibility of fixing the spindle. Among other things, a person is reliably protected from unintentional switching on of equipment. The lock system is responsible for this. Accidental injury is completely prevented by the fact that a reliable cover is put on the saw blade. The saw is convenient in transportation, because it has a relatively small size.