Plastic tint for windows is a must-have accessory, which is designed to protect the facade of the building from moisture, snow and other negative environmental factors. If they are not installed, the walls may lose their decorative effect. The presented products have other qualities that make them mandatory for use.
Advantages of the presented accessories
Plastic ebbs for windows have the following advantages:
- resistance to negative atmospheric influences (rain, frost, snow, ice);
- enhanced fire protection;
- resistance to rust and corrosion;
- convenient design and easy installation (it can be done with your own hand);
- strength and reliability;
- the ability to select the color of the element;
- simplicity in leaving.
Plastic castings for windows also have a low cost, so they are very popular. In addition, unlike metal products, they are almost silent.
What tools are needed for ebb mounting?
You can make the installation of the presented elements yourself. This will require very little time and tools. For example, subjects such as:
- tape measure and marker;
- jigsaw or grinder (in case you have to saw off part of the element);
- plastic castings for windows themselves;
- level;
- stubs;
- drill;
- polyurethane foam and sealant (silicone);
- sharp knife.
Other materials may be needed only if the window opening is not even.
Features of fastening elements
Installing the ebbs of plastic windows has some nuances. For example, they should fit snugly to the base and be cut exactly to its size. Otherwise, you will not be able to protect the walls from moisture, and the sound of droplets on the plastic will be clearly audible. All work should be done in sunny warm weather.
During installation, it must be taken into account that the tide should be at a slight angle (10 degrees). It is better to put a layer of waterproofing material under the element . To make it more securely attached to the base, use a combination of sealant and foam.
So, before starting any work, prepare the foundation. To do this, remove all debris and the remains of polyurethane foam from the window. With the help of additional slats, provide the necessary slope of the element. Now lay the tide on the base and check its evenness using the building level. If everything is in order, you can begin to mount it. Note that the bend of the product must go into the wall, so it should be mounted before the window slopes are installed .
After plastic ebbs for windows, the price of which does not exceed $ 5-10 per piece, are attached, seal all the gaps with sealant. This is necessary so that moisture does not fall under the element. For greater reliability, the fastening of the ebb can be strengthened with screws.
In principle, these are all tips for installing the items presented. The process is not too complicated, and you can do it all yourself. Good luck