If you are faced with the question of which self-leveling bulk floor is better, then it is worth understanding its varieties. To equip such systems, finely dispersed mixtures are used, which can form the basis of the finish or become a rough basis for further work.
Composition
This type of product has another name - liquid linoleum, but the resulting surface has no joints, representing a natural monolith. The market offers a wide range of appropriate mixtures, each of which differs in a specific composition. The main fillers are: gypsum, cement, as well as polymers. Among other things, among the ingredients you can find special additives that affect the strengthening of certain properties of the mass. Pigments are added to add color to the composition.
Overview of dedusting bulk floors
Quite often, before carrying out repairs, home masters think about which self-leveling self-leveling bulk floor is better to choose. For this, in some cases a dust-removing composition is used, which is used to prepare the base for further finishing with other materials. Among the advantages, it should be noted that the mass plays the role of a primer, strengthening the surface structure. It is quite simple to lay such compositions, and pouring is done with a thin layer, which eliminates a decrease in the height of the ceilings. However, there are certain disadvantages of dedusting compounds, one of which is that the surface will last about 3 years.
Features of polymer floors
If you are faced with the task of which self-leveling self-leveling floor is better to purchase, then you can pay attention to polymer compositions, which can be based on polyurethanes and methyl methacrylates. Their advantages are high strength, increased wear resistance, water resistance, the ability to undergo critical temperatures and their differences, high elasticity, long service life and reliable sound insulation.
Polymer floors are used in those rooms where they will undergo shock, vibration and increased loads during operation. Among other things, after completion of work, the surface will gain an attractive appearance. But, according to customers, such surfaces have certain disadvantages. For example, mixtures have a higher cost compared to other varieties, as well as demanding moisture base. Before starting work, the foundation must be carefully prepared.
More details on methyl methacrylate bulk floors
If you have a question about which bulk floor is better, a comparative review is recommended to read. It is presented in this article. Among the huge variety of bulk floors, methyl methacrylate compositions, which are often compared with polyurethane analogues, should be especially highlighted. The latter variety is less wear-resistant, but if we also make comparisons with the epoxy base, then methyl methacrylate is more chemically stable.
It is noteworthy that during operation, cracks will not appear on the surface, even if heavy equipment is used. When experts think about which self-leveling self-leveling floor is better (a review of the most popular is presented in the article), they quite often advise purchasing methyl methacrylate mixtures that dry quickly, which allows not to stop the production process. The surface hardens in an hour, and the final strength will be gained in 2 hours. But you must take into account the fact that the solidification of the liquid composition is accompanied by a rather pungent odor, which is not very pleasant, but is solved by high-quality ventilation.
Features of epoxy floors
If you still do not know which self-leveling self-leveling bulk floor is best purchased for repairs, you can pay attention to the epoxy composition, which spreads excellently during installation and also shows neutrality to most chemical compounds. Among the latter can be distinguished and aggressive.
Experts say that epoxy mixtures are excellent for arranging flooring in a garage. But you must be prepared for the low mechanical strength of the already hardened mass, as well as increased abrasion of the surface. When massive objects fall, cracks may appear on the floor, but if something is spilled on it, it will become slippery, which is not always convenient and safe during operation. Most of all epoxy mixes are suitable for utility rooms.
Characteristics of gypsum floors
If you choose a self-leveling self-leveling floor, which is better, it is certainly worth discussing with a specialist before starting work. On sale, you can also find gypsum-cement mixtures, which have many advantages. The compositions allow you to form a surface that is not too demanding on the alignment of the base, dries quickly after installation, and also has minimal shrinkage. For the reason that such floors are characterized by good thermal conductivity, they can be used as the basis of a warm floor system. But if you need a self-leveling bulk floor, which is better, it is recommended to decide before visiting the store. Thus, gypsum substrates must be laid on completely dry surfaces. In addition, they involve the installation of expansion joints, since the coating is subject to deformation, as well as expansion.
Reviews of cement bulk floors
If you want to equip the self-leveling bulk floor, which is better, customer reviews will make it clear. Cement floors are composed of acrylic additives and have high strength and increased adhesion. According to customers, such compounds are excellently suited as screeds, and they can be laid on almost any surface. Masters note that shrinkage is minimal, and pouring can be done even on a damp surface. During operation, the floor is not covered by cracks, and is also frost-resistant. According to users, cement self-leveling floors can be laid at any temperature, and this can be done both outdoors and indoors.
Self-leveling cement floors, reviews of which are usually positive, are also chosen by consumers for the reason that they harden quickly enough, you can use the floors to move within a few hours after installation. But cement bases also have disadvantages, which are a fairly long set of strength, as well as high consumption.
Experts say that such floors will absorb moisture to some extent during operation, depending on additives. The appearance is most often dull, gray and unattractive, but if you want to equip such floors and use them as a topcoat, you will have to purchase a composition with pigments, which costs significantly more. As practice shows, the final strength of the coating is obtained after 4 weeks. But the big expense is due to the fact that the layer should be equal to about 5 millimeters.
Characteristics of a bulk thick floor "Prospectors"
If you want to use a self-leveling self-leveling floor during the repair process, a review of the best is recommended to be considered. Among them there will certainly be products of the brand "Prospectors", which is presented for sale in a wide range. One of the varieties is a thick floor, which is equipped with a layer of 30 to 80 millimeters. After 28 days, the surface will reach a strength of 20 MPa.
It will take 40 minutes to develop the prepared mixture, and the consumption of the dry mixture per 1 square meter will be equivalent to 16 kilograms with one centimeter of the layer. If you purchase a solution in a 25-kg package, then you will need about 6 liters of water. Operation of the surface will be possible 2 days after application of the mixture.
Unis brand bulk floor
If you are in search of an answer to the question of which self-leveling mixture to choose under the laminate, then we recommend that you pay attention to Unis bulk floors, which are quite common on the Russian market. Variety "Horizon-2" acts as a final coating during repairs, and is used as an independent mixture of the rough surface before the installation of the finishing material as parquet, tile or decorative laminate. The appearance of the floor is quite attractive, the mixture allows you to get a flat and smooth surface of the decorative coating. With the help of this mixture, it is possible to easily smooth out the irregularities of the cement-sand screed. Among the additional advantages: moisture resistance and resistance to low temperatures.