Every person living in a private house wants to make a reliable and inexpensive heating system. Making heating a private house with your own hands is not difficult. The heat in private homes in cold weather is created by stove heating. Man has not yet come up with anything more reliable.
There are two drawbacks to furnace heating: laboriousness and a strong temperature difference, so you can install an electric or gas boiler instead, which does not have these drawbacks, but has its own - in case of possible interruptions in the supply of energy, the heat also ceases to be generated, so the furnace must be left to this extreme case, and before that, let it perform a decorative function.
Before you start installing the heating of a private house with your own hands, get acquainted with various types of heating and choose the option that is most suitable for your home. For example, a combined heating system uses individual elements of various systems, taking into account the specific layout of the house, which increases the efficiency of the system as a whole.
Before you do heating a private house with your own hands, insulate the house well, otherwise you will simply heat the street, which will lead to a decrease in the efficiency of the system as a whole and increase costs.
What types of heating systems are installed in a private house? These can be single-pipe and double-pipe systems, as well as heating systems using collectors, radiators, which are also called batteries, and registers.
Each of these systems has its drawbacks and advantages, and we will choose the one that could work properly both from an electric boiler and, in the event of an emergency interruption in the supply of electricity, from a conventional solid fuel furnace. It should also provide for the possibility of working from an electric boiler and furnace at the same time - this is in case of very severe frosts, that is, in all frosts, the system requires confident heating of the required volume of the room.
When you install heating with your own hands, you need to keep in mind that it is advisable to install a solid fuel stove or boiler in a separate room, and not necessarily in a special extension, as developers often do, you can use existing small rooms like a storage room.
When installing water heating with your own hands, you need to know that it can be one-pipe and two-pipe, and the circulation of water is natural and forced. A two-pipe system having a pipeline two and a half times longer than a single-pipe system is considered obsolete and irrational. In addition, it is very difficult to install. The one-pipe system is easier to install, it warms up faster and more evenly, so when installing water heating with your own hands, they choose this system.
When heating is installed with your own hands, a simple single-line system will include the following elements: a heating boiler, an expansion tank, or a hydraulic accumulator, radiators, or, as they are often called in everyday life, batteries, a filter and a circulation pump. If the heating is mounted in a small one-story house, then the circulation pump may not be used.
For the pipeline, it is better to choose polypropylene, rather than steel, susceptible to corrosion, pipes. Polypropylene pipes are easy to cut, they do not need to be welded or painted, the heating system is not clogged from them. Its minus can be considered that this system has a forced circulation. Aluminum radiators also do not clog the system, and their heat transfer is twice as much as that of cast-iron, which helps to reduce the fins on the radiator. But cast-iron radiators are a bit cheaper.
As you can see, it is not at all difficult to make water heating of a private house with your own hands.